e-
> From: href="mailto:wireless-boun...@wispa.org";>wireless-boun...@wispa.org
> [ href="mailto:wireless-boun...@wispa.org";>mailto:wireless-boun...@wispa.org]
> On
> Behalf Of Mike Hammett
> Sent: Thursday, May 06, 2010 6:21 PM
> To: WISPA General List
eless-boun...@wispa.org] On
Behalf Of Mike Hammett
Sent: Thursday, May 06, 2010 6:21 PM
To: WISPA General List
Subject: Re: [WISPA] New WISP
Usually 5.8 to the tower, and 5.2 for the repeater. I haven't done any
repeaters like this since DFS. I do have a couple at 2.4.
-
Mike Hammett
Intell
n"
To: "WISPA General List"
Sent: Monday, April 26, 2010 5:59 PM
Subject: Re: [WISPA] New WISP
Several little repeater sites I have are Mikrotik APs and Ubiquiti CPEs.
No
more then 15 stations on each AP off the top of my head.
Josh Luthman
Office: 937-552-2340
Direct: 937-552-23
iginal Message -
> From: "Mike Hammett"
> To: "WISPA General List"
> Sent: Thursday, May 06, 2010 5:21 PM
> Subject: Re: [WISPA] New WISP
>
>
> Most of my repeater sites are about $150 - $200 more than the CPE. I
> upgrade to a 433 from a 411,
What omini are you using, Josh? Running 2.4 on the Tik boxes with the XR2?
Just interested in the setup on your end. Sounds like a winner.
Bo-
- Original Message -
From: "Mike Hammett"
To: "WISPA General List"
Sent: Thursday, May 06, 2010 5:21 PM
Subject:
able.
>>>
>>> Bob-
>>>
>>>
>>> -----Original Message-
>>> From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
>>> Behalf Of Larry Yunker
>>> Sent: Wednesday, April 28, 2010 9:29 AM
>>> To: 'WIS
Bucyrus, OH 44820
419-562-6405
www.wavelinc.com
-Original Message-
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Mike Hammett
Sent: Thursday, May 06, 2010 6:21 PM
To: WISPA General List
Subject: Re: [WISPA] New WISP
Usually 5.8 to the tower, and 5.2 for the
s!
>
> laters,
> marlon
>
> - Original Message -----
> From: "Mike"
> To: "'WISPA General List'"
> Sent: Tuesday, April 27, 2010 8:46 AM
> Subject: Re: [WISPA] New WISP
>
>
>
>> Marlon:
>>
>> I am very interested in
; For the busier sites I've started to install 5.8 gig systems over the top
>>>> of
>>>> the 2.4 and charge a little more for it. So far people would still rather
>>>> go with the cheaper stuff even though it's much less consistent in it's
>>>&g
--
>> From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
>> Behalf Of Larry Yunker
>> Sent: Wednesday, April 28, 2010 9:29 AM
>> To: 'WISPA General List'
>> Subject: Re: [WISPA] New WISP
>>
>>
>> I agree that Coding is not
#x27;s
>>> performance.
>>>
>>> For one site I have finally broken down and just install the 5.8 and sell
>>> it
>>> at the same price as the 2.4 just so that I can get people moved.
>>>
>>> Now if I could just get more/cheaper backhau
rmance.
>>
>> For one site I have finally broken down and just install the 5.8 and sell
>> it
>> at the same price as the 2.4 just so that I can get people moved.
>>
>> Now if I could just get more/cheaper backhaul out here.
>> marlon
>>
>> -
http://www.linktechs.net
LIVE On-Line Mikrotik Training - Author of "Learn RouterOS"
-Original Message-
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Dennis Burgess
Sent: Wednesday, May 05, 2010 10:07 AM
To: WISPA General List
Subject: Re: [WISPA] New
t;
To: "WISPA General List"
Sent: Friday, April 30, 2010 12:32 PM
Subject: Re: [WISPA] New WISP
> Do you have a part number for that? Where do you get it?
>
> Thanks!
> Greg
>
> On Apr 30, 2010, at 9:29 AM, Marlon K. Schafer wrote:
>
>> I
WISPA General List"
Sent: Friday, April 30, 2010 12:32 PM
Subject: Re: [WISPA] New WISP
> Do you have a part number for that? Where do you get it?
>
> Thanks!
> Greg
>
> On Apr 30, 2010, at 9:29 AM, Marlon K. Schafer wrote:
>
>> I've been REAL
Do you have a part number for that? Where do you get it?
Thanks!
Greg
On Apr 30, 2010, at 9:29 AM, Marlon K. Schafer wrote:
> I've been REALLY happy with the Shireen double insulated cat5 with
> no gel.
WISPA Wa
PA General List"
Sent: Tuesday, April 27, 2010 8:28 PM
Subject: Re: [WISPA] New WISP
> If I had to do it all over again, I would say run, run as far away as
> possible.
>
> Scottie
>
> -- Original Message --
> From: "Marlon
ents so shouldn't be a problem on the wisp
> side of things. :)
> Sent from my Datacom Specialists black berry
>
> - Original Message -
> From: wireless-boun...@wispa.org
> To: leyun...@wispadvantage.com ; WISPA General
> List
> Sent: Tue Apr 27 17:32:34 2010
the first
place.
The trick seems to be finding guys that are good at what they do AND aren't
so buried that they can't get to you.
laters,
\marlon
- Original Message -
From: "Larry Yunker"
To: "'WISPA General List'"
Sent: Tuesday, April 27,
- Original Message -
From: "Josh Luthman"
To: "WISPA General List"
Sent: Tuesday, April 27, 2010 8:54 AM
Subject: Re: [WISPA] New WISP
>Good water tight box, $200+.
The ones from Tessco are 60-100
mks: Cool. I'll have to look at them. Do they include
R is that the DCE? If so, what size is that box?
laters,
marlon
- Original Message -
From: "Chuck Hogg"
To: "WISPA General List"
Sent: Tuesday, April 27, 2010 8:53 AM
Subject: Re: [WISPA] New WISP
> For small repeater sites (less than 40 subs) we'll do the follow
- Original Message -
From: "Mike"
To: "'WISPA General List'"
Sent: Tuesday, April 27, 2010 8:46 AM
Subject: Re: [WISPA] New WISP
> Marlon:
>
> I am very interested in your "no more taping" bulkhead connector. Do you
> mean on the NEMA
You're no Jack Kennedy.
- Original Message -
From: "Gary Garrett"
To: "WISPA General List"
Sent: Friday, April 30, 2010 12:32 AM
Subject: Re: [WISPA] New WISP
>I don't know Jack...
>
> But you k
I don't know Jack...
But you knew that.
Who is Jack?
WISPA Wants You! Join today!
http://signup.wispa.org/
WISPA Wi
>One thing to mention: You don't have to offer the fastest speed or the
>lowest price. Being reliable is much more valuable in the long run.
>There is that 5-10% that will always go for the fastest or cheapest. In
>my opinion they are not the customers you want because they take up more
>support a
There is no all in one product to be a WISP. You need to evaluate your
area against potential equipment. Once you decide which equipment will
work best in your environment then you need to piece together a back end
management, billing, customer support, network monitoring, alerting,
scheduling,
Who is Jack?
- Original Message -
From: "Stuart Pierce"
To: "WISPA General List"
Sent: Wednesday, April 28, 2010 2:18 PM
Subject: Re: [WISPA] New WISP
> Larry , Shmary, he don't know jack about running a xISP. Just kidding,
> Larry knows mo
--Original Message-
>From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
>Behalf Of Larry Yunker
>Sent: Wednesday, April 28, 2010 9:29 AM
>To: 'WISPA General List'
>Subject: Re: [WISPA] New WISP
>
>
>I agree that Coding is not equal to Networking. B
SP operation.
>
> Regards,
> Larry Yunker
>
>
> -Original Message-
> From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
> Behalf Of Liam Cummings
> Sent: Monday, April 26, 2010 5:50 PM
> To: wireless@wispa.org
> Subject: [WISPA] New WISP
>
un...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Larry Yunker
Sent: Wednesday, April 28, 2010 9:29 AM
To: 'WISPA General List'
Subject: Re: [WISPA] New WISP
I agree that Coding is not equal to Networking. But as I noted...
programming IOS or even chucking in routes using
; WISPA General List
Subject: Re: [WISPA] New WISP
Coding != networking :)
On 4/27/10, Larry Yunker wrote:
> For what it is worth... running a successful WISP will require a certain
> level of technical expertise and probably a "coder".
>
> Anyone can throw up a simple acces
r you (will you need
>web, mail and billing systems etc.)?
>
>Lets start with that.
>marlon
>
>- Original Message -
>From: "Liam Cummings"
>To:
>Sent: Monday, April 26, 2010 2:49 PM
>Subject: [WISPA] New WISP
>
>
>> Hi all,
>>
>>
he wisp side of things. :)
Sent from my Datacom Specialists black berry
- Original Message -
From: wireless-boun...@wispa.org
To: leyun...@wispadvantage.com ; WISPA General List
Sent: Tue Apr 27 17:32:34 2010
Subject: Re: [WISPA] New WISP
Coding != networking :)
On 4/27/10, Larry Yunke
reless-boun...@wispa.org] On
> Behalf Of Liam Cummings
> Sent: Monday, April 26, 2010 5:50 PM
> To: wireless@wispa.org
> Subject: [WISPA] New WISP
>
> Hi all,
>
> We are a technologies solutions company located in Cincinnati and trying
> to become a WISP. We are running
exist that provide for all of these
aspects of WISP operation.
Regards,
Larry Yunker
-Original Message-
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Liam Cummings
Sent: Monday, April 26, 2010 5:50 PM
To: wireless@wispa.org
Subject: [WISPA] New WISP
ispa.org [mailto:wireless-boun...@wispa.org] On
> Behalf Of Marlon K. Schafer
> Sent: Tuesday, April 27, 2010 10:36 AM
> To: WISPA General List
> Subject: Re: [WISPA] New WISP
>
> That's way more than $400 for a repeater site.
>
> I don't pay monthly rent of most of
ww.shelbybb.com
-Original Message-
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Marlon K. Schafer
Sent: Tuesday, April 27, 2010 11:36 AM
To: WISPA General List
Subject: Re: [WISPA] New WISP
That's way more than $400 for a repeater site.
I don't
t: Tuesday, April 27, 2010 10:36 AM
To: WISPA General List
Subject: Re: [WISPA] New WISP
That's way more than $400 for a repeater site.
I don't pay monthly rent of most of them either, but it still costs to build
one.
Good water tight box, $200+.
Coax, $1 per foot or so. $12 each for co
1001 ways to depelt that feline.
Marlon
- Original Message -
From: "Josh Luthman"
To: "WISPA General List"
Sent: Tuesday, April 27, 2010 8:19 AM
Subject: Re: [WISPA] New WISP
All of my repeater sites have 0 infrastructure cost. I'm using a TV tower,
grain l
t people moved.
>
> Now if I could just get more/cheaper backhaul out here.
> marlon
>
> - Original Message -
> From: "Josh Luthman"
> To: "WISPA General List"
> Sent: Monday, April 26, 2010 5:59 PM
> Subject: Re: [WISPA] New WISP
>
>
&
ll, 800-405-9865 and he can guide you in the
> right direction.
>
> Regards,
> Chuck Hogg
> Shelby Broadband
> 502-722-9292
> ch...@shelbybb.com
> http://www.shelbybb.com
>
>
> -Original Message-
> From: wireless-boun...@wispa.org [mailto:wireless-boun...@wisp
billing systems etc.)?
Lets start with that.
marlon
- Original Message -
From: "Liam Cummings"
To:
Sent: Monday, April 26, 2010 2:49 PM
Subject: [WISPA] New WISP
> Hi all,
>
> We are a technologies solutions company located in Cincinnati and trying
> to become a WIS
ccess to the
California's Rural Central Valley
-Original Message-
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Liam Cummings
Sent: Monday, April 26, 2010 2:50 PM
To: wireless@wispa.org
Subject: [WISPA] New WISP
Hi all,
We are a technologie
right direction.
>
> Regards,
> Chuck Hogg
> Shelby Broadband
> 502-722-9292
> ch...@shelbybb.com
> http://www.shelbybb.com
>
>
> -Original Message-
> From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
> Behalf Of Liam Cummings
>
@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Liam Cummings
Sent: Monday, April 26, 2010 5:50 PM
To: wireless@wispa.org
Subject: [WISPA] New WISP
Hi all,
We are a technologies solutions company located in Cincinnati and trying
to become a WISP. We are running into two road blocks.
1 - We need
On Mon, Apr 26, 2010 at 2:49 PM, Liam Cummings
wrote:
> Hi all,
>
> We are a technologies solutions company located in Cincinnati and trying
> to become a WISP. We are running into two road blocks.
>
> 1 - We need to choose software that doesn't need a coder to operate
>
> 2 - Choosing the right a
Hi all,
We are a technologies solutions company located in Cincinnati and trying
to become a WISP. We are running into two road blocks.
1 - We need to choose software that doesn't need a coder to operate
2 - Choosing the right access points and other equipment
We would love to here your tho
47 matches
Mail list logo
