A little stretch of the Super33 helps it conform to irregularities and
stick to itself well. Not a lot, just some tension while installing.
The rubber tape I use from Tessco says to stretch it to 1/2 its original
width. If you do that, it, too, conforms to irregularities and really
sticks to it
Does't the glue on the Super-33 start to fail with time and you end up with the
end of the tape coming loose and flapping in the wind? That's why I like to
finish with the rubber tape.
Greg
On Mar 2, 2010, at 12:22 AM, Kurt Fankhauser wrote:
> YES!!! This is how I seal connections, has never f
I use a small tiewrap around the end to prevent that from happening.
Mark
-Original Message-
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Greg Ihnen
Sent: Tuesday, March 02, 2010 6:36 AM
To: WISPA General List
Subject: Re: [WISPA] Moisture Abatement Te
The trick to that is to NOT stretch the last couple wraps on the 33 or 88.
Of course all bets are off if it's really cold. I keep a roll in my pants
pocket for cold weather wraps.
-Original Message-
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Greg Ihn
The government caters/renders to money/Caesar , not to people/God. Like Bobs
says, innovation and development took place and took wireless faster and
farther with the governments so called junk bands. Now they see the dollar
signs and only a few, the proud, the super rich will get the spectrum.
The rule is to never stretch the last 2 winds of the tape as you put
it on... and ALWAYS *CUT* the tape, never rip it. Ripping implies
stretching till failure.
I can always tell who rips and who cuts on towers by the number of
vinyl flags flapping when I climb by other antennas on the tower.
As Kurt said, always wrap from the bottom up. Think of it like shingling a
roof; you wouldn't start at the peak and work down. If you stretch it below
where you have the mastic and continue to stretch and wrap, it will hold, as
long as you let up for those critical last couple and cut it at the T
Amen to that brother.
V
-Original Message-
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Stuart Pierce
Sent: Tuesday, March 02, 2010 7:09 AM
To: lakel...@gbcx.net; WISPA General List
Subject: Re: [WISPA] FCC Broadband plan call for more spectrum
but
Stay away from the rubber tape they sell at Ace Hardware, though. The ACE
brand sucks. If not wrapped with electrical tape it absolutely falls apart
after a month or so in the sun. The UV totally kills it. I've had plenty
of the Scotch brand self vulcanizing tape unprotected for years and it
we
Right, you def are supposed to cut the tape and not stretch it the last few
wraps. However sometimes I do end up stretching it untill it breaks cause I
forgot a knife at 150 foot up. I have NEVER seen a flap exceed 1.5 inches
when using Super-33. It's like the tape peels back to where it didn't get
Ha! Yeah, gotta keep it warm in the pocket and then use it quickly!
Stretching it in the cold, you can see the adhesive flake off as it freezes.
Bob-
-Original Message-
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Mike
Sent: Tuesday, March 02, 2010
I'm looking for small, 3-6 KW, propane fed generators with automatic
transfer / exercise switches. This would be an ideal size for small
tower sites.
Marco
--
Marco C. Coelho
Argon Technologies Inc.
POB 875
Greenville, TX 75403-0875
903-455-5036
---
Got an email about the new products over at UBNT.I was looking at the
PowerAP, 1000mw indoor router. U I kinda go out of my way to keep
from too much RF, I've had 2 friends in the business die from brain cancer
and that stuff creeps me out. Any opinions on sleeping next to a 1000mw A
I probably just wouldn't put it under my pillow.
-
Mike Hammett
Intelligent Computing Solutions
http://www.ics-il.com
--
From: "Robert West"
Sent: Tuesday, March 02, 2010 9:28 AM
To: "'WISPA General List'"
Subject: [WISPA] New Ubiquiti Gear
You can convert pretty much any gas or diesel generator to use propane so
you may find a cheaper liquid model then just switch it over to propane. In
fact, I used to start an old pull start generator with propane just by
holding the unlit propane torch to the air intake. Would start with just a
c
If it's on the night stand, I'd wear an aluminum foil cap fastened to a good
ground.
1 watt in the home? That just seems a little excessive to me.
Actually, I think a cell phone to your ear, especially in rural areas where
the RF has to be stepped up, would be more of a danger.
Have you ever
I did something similar ONCE to start my generator. I squirted ether into
the air intake to get it started. It took a few weeks for my eyebrows to
grow back.
-Original Message-
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Robert West
Sent: Tuesday, Ma
Ha! Ether BAD! I think we've all learned that lesson! The propane is
fairly safe,
-Original Message-
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Mike
Sent: Tuesday, March 02, 2010 10:45 AM
To: 'WISPA General List'
Subject: Re: [WISPA] small generato
I bet I haven't used ether since the late 70's. You're bringing back bad
memories of me and a chain saw from hell.
Bob-
-Original Message-
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Mike
Sent: Tuesday, March 02, 2010 10:45 AM
To: 'WISPA General Li
Alpha power makes some nice small automatic generators that run off
propane. They are about the size of one of those pad mount battery boxes
that the cable industry uses to back up their outdoor plant. The small
ones are vertically oriented and don't take up much ground space.
Available in 24VD
Bob,
Are you sure that wasn't N2O?
-Original Message-
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Robert West
Sent: Tuesday, March 02, 2010 9:53 AM
To: 'WISPA General List'
Subject: Re: [WISPA] small generator with ATS
I bet I haven't used ether sinc
We just ordered a GE 7KW from homedepot. #100661779 It comes with automatic
transfer for
$2239. No idea if it auto exercises; I'll find out soon enough.
What's your actual load?
For most of my tower sites, deep cycle batteries and tripplite APS are my
solution.
On Tue, Mar 02, 2010 at 09:27:
Surly you do not mean N2O I have a few stories about N2O. Only
one involves the cops.
Bob-
-Original Message-
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Mike
Sent: Tuesday, March 02, 2010 11:00 AM
To: 'WISPA General List'
Subject: Re:
I've thought off an on about using old APC units for backup. I have a small
pile of them, batteries bad. People give them to me. Will APC backup units
handle connecting a full size deep cycle battery to them? I guess I could
try it. Doesn't have to look pretty sitting in a box.. Anyone do
Sorry, I mean N02. Sheeesh..
-Original Message-
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Robert West
Sent: Tuesday, March 02, 2010 11:05 AM
To: 'WISPA General List'
Subject: Re: [WISPA] small generator with ATS
Surly you do not mean N2O.
The deep cycle batteries and an inverter are a good idea. I like the APC
units much better than the Tripplites; they have better power supplies.
I have replaced a dead internal gel cell with an external deep cycle
battery. The only down side is the trickle circuitry is sized for a 7 ah or
so bat
It was in 2000 we spent 8 million with Nortel to build a new CLEC in SW
Florida. In 10 years they went from advertising during the Superbowl to
having vultures pick the bones.
http://blog.connectedplanetonline.com/unfiltered/2010/02/25/nortels-name-lik
ely-dies-with-genband-sale/
Friend
On Tue, Mar 02, 2010 at 10:25:37AM -0600, Mike wrote:
> The deep cycle batteries and an inverter are a good idea. I like the APC
> units much better than the Tripplites; they have better power supplies.
I've had APCs run great for 10 years, others have gotten hot and bulged
batteries to the
ext
For those of you following the game, BB USA advises that they have
extended the deadline on both BIP and BTOP applications.
Chris Cooper
Intelliwave
This message was sent using IMP, the Internet Messaging Program.
I don't see anything about that listed on broadbandusa.gov. The only posting
for today is the latest winners from round one. Where are you looking?
Chuck
On Mar 2, 2010, at 11:51 AM, ccoo...@intelliwave.com wrote:
> For those of you following the game, BB USA advises that they have
> extended
Odd, it's not in the press releases updates section...but it IS in the FAQ!
Thanks Chris!
Chuck
On Mar 2, 2010, at 11:51 AM, ccoo...@intelliwave.com wrote:
> For those of you following the game, BB USA advises that they have
> extended the deadline on both BIP and BTOP applications.
>
> Chri
Tuesday, March 2, 2010
NTIA and RUS will grant a limited extension of time to file infrastructure
applications in the second funding round. Specifically, applicants for BTOP
Comprehensive Community Infrastructure projects will have until March 26th to
file their applications to NTIA. Applicants
I don't remember the email conversation, but it's very interesting and I'll be
looking at upgrading some units evidently to the latest version.with a
backup plan.
-- Original Message --
From: "Kurt Fankhauser"
Reply-To: WISPA General List
Date: Tue,
And the Broadband Strangle Us, er I mean Stimulus, continues. This
continued postponement of decisions, awards, etc. is having the opposite
effect as intended.
Patrick
-Original Message-
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Matt Liotta
Sent: Tu
And the Broadband Strangle Us, er I mean Stimulus, continues. This
continued postponement of decisions, awards, etc. is having the opposite
effect as intended.
Patrick
-Original Message-
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Matt Liotta
Sent: Tu
Does anyone know anything about a company named Data Site Consortium?
Someone named Debra Dupée is calling and asking for information about my
company that has to do with the "Federal Broadband Mapping Program"
She said she got my information from FCC Form 477! And is working with
all ISPs in
I'd tell them to 'Bring It', it's on !
-- Original Message --
From: Jason Wallace
Reply-To: WISPA General List
Date: Tue, 02 Mar 2010 10:46:58 -0700
>Does anyone know anything about a company named Data Site Consortium?
>
>Someone named Debra Dupée is
What's the new date?
Chuck Bartosch wrote:
Odd, it's not in the press releases updates section...but it IS in the FAQ!
Thanks Chris!
Chuck
On Mar 2, 2010, at 11:51 AM, ccoo...@intelliwave.com wrote:
For those of you following the game, BB USA advises that they have
extended
We prefer:
Layer Material
1 coating of liquid scotch coat
2 3M self vulcanizing tape
3 coating of liquid scotch coat
4 3M self vulcanizing tape
5 cheap electrical tape
The liquid scotch coat really seals everything up. No issues with
pvc, teflon, or other
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Jason Wallace wrote:
> Does anyone know anything about a company named Data Site Consortium?
>
> Someone named Debra Dupée is calling and asking for information about my
> company that has to do with the "Federal Broadband Mapping Program"
>
> She s
On Tue, Mar 02, 2010 at 10:46:58AM -0700, Jason Wallace wrote:
> Does anyone know anything about a company named Data Site Consortium?
>
> Someone named Debra Dupée is calling and asking for information about my
> company that has to do with the "Federal Broadband Mapping Program"
I'm not aware
Monday, March 29th for BIP and Friday, March 26th for BTOP (for the
infrastructure builds that WISPs would be concerned with).
Chuck
On Mar 2, 2010, at 12:51 PM, Jack Unger wrote:
> What's the new date?
>
> Chuck Bartosch wrote:
>>
>> Odd, it's not in the press releases updates section...but
http://www.facebook.com/pages/Rosenberg-TX/Broadband-Properties-Magazine/163983686345
http://www.bbpmag.com/
Hope this helps.
Mark
--
From: "Stuart Pierce"
Sent: Tuesday, March 02, 2010 9:48 AM
To: "WISPA General List"
Subject: Re: [WISPA] Data
OK All my thrifty friends out there
What is the fastest, most reliable and cost effective system you have
found to terminate multimode fiber?
I'm sure someone out there knows this answer. I'm still using Corning
Unicam and at $12+ per connection it gets up there doing a 500
termination j
I have a situation where a rural housing development (very rural, up in the
mountains, far far from town, heavily wooded) is wanting broadband, and it
seems to me that the best way would be to wire these guys up. I have 900
gear onsite, but the fact that the area is steep, rugged, and heavily
Isn't the trend these days to splice already terminated tails rather than
installing connectors? I hear splicing is much faster and touts a less
chance of error. At least that's what I learned last time we looked into
doing our own fiber terminations...
Best,
Brad
-Original Message-
I like these:
http://www.afltele.com/resourcecenter/userguides/pdfs/FAST-SC-ST-LC-Connector-Instructions.pdf
I think they were about $6.00 each. They are as easy to install as the
website claims.
Bob Moldashel wrote:
> OK All my thrifty friends out there
>
> What is the fastest, most reliab
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
MDK wrote:
> I have a situation where a rural housing development (very rural, up in the
> mountains, far far from town, heavily wooded) is wanting broadband, and it
> seems to me that the best way would be to wire these guys up. I have 900
> gear
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
http://en.wikipedia.org/wiki/Outside_plant is a good starting point most
likely.
- --
Charles N Wyble
Linux Systems Engineer
char...@knownelement.com (818)280-7059
http://www.knownelement.com
-BEGIN PGP SIGNATURE-
Version: GnuPG v1.4.9 (GNU/
Google each email address separately. There are a few hits that relate.
Matt
> Does anyone know anything about a company named Data Site Consortium?
>
> Someone named Debra Dupée is calling and asking for information about my
> company that has to do with the "Federal Broadband Mapping Program"
Both are feasible, though technically terminating would result in less
loss since a splice adds another point of attenuation, if small. It also
depends on the type of splice. Fusion splicing provides the best splice
result though a mechanical splice might be faster and avoids the cost of
renting a
On 2 March 2010 13:28, Bob Moldashel wrote:
> OK All my thrifty friends out there
>
> What is the fastest, most reliable and cost effective system you have
> found to terminate multimode fiber?
>
> I'm sure someone out there knows this answer. I'm still using Corning
> Unicam and at $12+ pe
Anyone using this product in 3.65 or 2.3 ghz? Can you provide any results.
Thanks,
- Matt
WISPA Wants You! Join today!
http://signup.wispa.org/
--
On Tue, Mar 02, 2010 at 10:27:45AM -0800, MDK wrote:
> I have a situation where a rural housing development (very rural, up in the
> mountains, far far from town, heavily wooded) is wanting broadband, and it
> seems to me that the best way would be to wire these guys up. I have 900
> gear onsi
The ones I used years ago were big pigs and the OTDRs we in huge rolling
cases. The last fusion splicer I saw was a little DC model that was
about the size of sandwich. It is a measure of my advancing years I
suppose.
Patrick Leary
Aperto Networks
813.426.4230 mobile
-Original Message-
F
Mac, are you still around? Walter/NJ
WISPA Wants You! Join today!
http://signup.wispa.org/
WISPA Wireless List: wireless@wispa.org
S
Geez, don't use a subject like that. Makes me think that I'm going to
read something bad.
Patrick
-Original Message-
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Walter W Stumpf Jr
Sent: Tuesday, March 02, 2010 12:27 PM
To: wireless@wispa.org
Subject:
Right...this would be much more fun!
Regards,
Jeff
Jeff Broadwick
ImageStream
800-813-5123 x106 (US/Can)
+1 574-935-8484 x106 (Int'l)
-Original Message-
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Patrick Leary
Sent: Tuesday, March 02, 2010
No worries since you cant buy them :)
-Rick
On Tue, Mar 2, 2010 at 10:28 AM, Robert West wrote:
> Got an email about the new products over at UBNT. I was looking at the
> PowerAP, 1000mw indoor router. U I kinda go out of my way to keep
> from too much RF, I've had 2 friends in the b
I remember Kurt. I also remember they dont like easy access to the
reset switch. Tranzeo units work well but thank goodness for choice!
-RickG
On Tue, Mar 2, 2010 at 12:07 PM, Kurt Fankhauser wrote:
> Well I don't know if many of you remember this issue but after about a year
> of back and forth
I prefer not having easy access to the reset switch. That way a competitor
can't come along and swap your customer onto their service and use the CPE
that I still own.
Kurt Fankhauser
WAVELINC
P.O. Box 126
Bucyrus, OH 44820
419-562-6405
www.wavelinc.com
-Original Message-
From: wireles
To each his own but there is a reason every equipment manufacturer I
know of has an easy to get to reset switch. As you know, with Tranzeo,
you have to break the unit apart which convienently invalidates the
warranty.
Who owns your CPE, you or the customer? If your competition is using
"your" radio
There is a certain amount of public data available from the 477 data. One
piece of data they do have is a list of all the people who actually filed.
Beyond that they don't have much information other than the aggregated
reports filed by the FCC. This woman is clearly thinking she has a lot more
aut
I have an RB750 which I'm trying to install. It's not my first. The modem is
not acting as a DHCP server so I have to config the WAN port (Eth1 Gateway)
manually. When I've configured the modem (using NAT) I can't access or ping the
internet. I can ping the modem. So pings get to the modem but n
Greg,
We do have a few engineers still hanging here that can assist you with
this, we do charge, but if you need some assistance let us know!
---
Dennis Burgess, CCNA, Mikrotik Certified Trainer, MTCNA, MTCRE, MTCWE,
MTCTCE, MTCUME
Link Tec
What kind of IP config do you have on ether1 and can the 750 ping out?
On 3/2/10, Greg Ihnen wrote:
> I have an RB750 which I'm trying to install. It's not my first. The modem is
> not acting as a DHCP server so I have to config the WAN port (Eth1 Gateway)
> manually. When I've configured the mod
Can you ping the public address on the 750G from the lan? Can you ping any
external public addresses from the 750G? If answer to both is yes, check masq
rule on outbound interface and that connection tracking is enabled.
-Original Message-
From: Greg Ihnen [mailto:os10ru...@gmail.com]
S
Oh yes, don't forget irc://irc.freenode.net/##mikrotik
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
“Success is not final, failure is not fatal: it is the courage to continue
that counts.”
--- Winston Churchill
On Tue, Mar 2, 2010 at 6:21 PM, Pa
I know, we just discussed this topic a few weeks ago. I've got a new
customer who is right next to a grain silo and the issue is that it
drops their connection with XBox. I'm not getting complaints from
anyone else. The CPE is a NS2Loco and the signal is -29! I've already
have it aimed up at the sk
Buy cheap fiber media converters and some fiber if they are that close.
-Cameron
> I know, we just discussed this topic a few weeks ago. I've got a new
> customer who is right next to a grain silo and the issue is that it
> drops their connection with XBox. I'm not getting complaints from
> anyon
Did you set the correct default route on the 750?
Greg Ihnen wrote:
> I have an RB750 which I'm trying to install. It's not my first. The modem is
> not acting as a DHCP server so I have to config the WAN port (Eth1 Gateway)
> manually. When I've configured the modem (using NAT) I can't access o
No downside. You introduced 25dB of attenuation is all.
Smart move actually
-Original Message-
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf
Of RickG
Sent: Tuesday, March 02, 2010 3:42 PM
To: WISPA General List
Subject: [WISPA] signal too hot!
I know
Darn county road is between them and the silo :(
On Tue, Mar 2, 2010 at 6:47 PM, wrote:
> Buy cheap fiber media converters and some fiber if they are that close.
>
> -Cameron
>
>> I know, we just discussed this topic a few weeks ago. I've got a new
>> customer who is right next to a grain silo a
I had a customer like this - I just moved the CPE on the inside. Use that
rubber stick to the glass mount. I know the Nanostations can, for your sake
I hope the Locos can too, use a window mount (or wall mount) and put it
inside the house.
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1
One of our favorite topics :)
So, I've had fairly good luck with the tower agreements that I've
posted until lately. It seems people are getting real particular these
days, which is fine. After two years of discusions, I've finally made
some progress of getting on a nearby towns water tank. My iss
My understanding is, even without that clause written, being a government
they have that clause.
-Original Message-
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of RickG
Sent: Tuesday, March 02, 2010 6:04 PM
To: WISPA General List
Subject: [WISPA] tower co
They can, I even tested it but I've never had good luck with indoor
installs. It seems they always have weird issues. Maybe new stuff is
better?
On Tue, Mar 2, 2010 at 6:56 PM, Josh Luthman
wrote:
> I had a customer like this - I just moved the CPE on the inside. Use that
> rubber stick to the g
"unless caused by Grantor's negligent or willful
conduct or Grantor's failure to fulfill its maintenance obligations as set
forth
in Paragraph 6 above." is your out.
This looks pretty good.
One of the things we have added to our contracts is "legal fees arising from
litigation are the responsibil
I have copied the paragraph, reversed the words and then it protects both.
Haven't done it with a government entity, but contracts really should be
to protect both parties.
RickG wrote:
> One of our favorite topics :)
>
> So, I've had fairly good luck with the tower agreements that I've
> posted
I dont have any issues with them protecting themselves, my issue is
making sure I have protection. Maybe I'm making more out it than I
shoudl? Here is the whole agreement:
EASEMENT AGREEMENT
1. PARTIES:
, hereinafter referred to as
“Grantor”.
CITY OF ANYTOWN, hereinafter referred to as “Grantee”.
Good Call Scott. That's exactly what I was thinking.
DHCP will set the IP address and default route.
>From Winbox
IP-> Routes
Hit the + Button
0.0.0.0/0 for destination
Enter the Default Gateway from your provider in the gateway field
You will also need a masquerade rule.
If ether1 is your publ
Well if you added attenuation with the silo and polarity it would be
similar to the window or wall adding attenuation.
When a friend moved in and I needed to "mooch" Internet from the
office (three 2.4 10mhz sectors) I just put some books on a jpole
mount and the ns2 worked quite well. Wouldn't l
Great tip! So, otherwise you would sign it? I'm runnig it past a
lawyer friend but wanted to hammer out any details before he gets
involved. Thanks! -RickG
On Tue, Mar 2, 2010 at 7:08 PM, Ryan Spott wrote:
> "unless caused by Grantor's negligent or willful
> conduct or Grantor's failure to fulfil
Well, the lawyer is not gonna like my advice.. How else does he get paid? :)
I also like binding arbitration, of course, the one that files suit pays for
the arbitration fees. Again, this forces people to 'figure it out' before
they start rattling sabers!
ryan
On Tue, Mar 2, 2010 at 4:19 PM, Ri
See inline for some things to question
RickG wrote:
> I dont have any issues with them protecting themselves, my issue is
> making sure I have protection. Maybe I'm making more out it than I
> shoudl? Here is the whole agreement:
>
> EASEMENT AGREEMENT
> 1. PARTIES:
> , hereinafter referred to as
A little off topic, but while were talking about contracts, has anyone
negotiated with a city to use utility poles to run fiber.
Sent from my iPhone
On Mar 2, 2010, at 6:34 PM, Scott Reed
wrote:
> See inline for some things to question
>
> RickG wrote:
>> I dont have any issues with them pr
How about indemnifying each other? If they want the language then the
reciprocal should be expected, right?
Indemnification. Lessee shall indemnify and hold Lessor harmless from any
and all liability, damage, expense (including attorneys' fees and costs),
cause of action, suits, claims or judgme
Thanks!
The Eth1 is configured 201.222.12.54/30 and network of 201.222.12.52 and
broadcast of 201.222.12.55. The RB750 couldn't ping out either.
I did discover the problem was with routes, but it's more complicated
Greg
On Mar 2, 2010, at 6:51 PM, Josh Luthman wrote:
> What kind of IP config d
No, I couldn't ping even from the RB750. The problem was with routes.
Thanks!
Greg
On Mar 2, 2010, at 6:51 PM, Paul Hendry wrote:
> Can you ping the public address on the 750G from the lan? Can you ping any
> external public addresses from the 750G? If answer to both is yes, check masq
> rule o
Thanks. No, I didn't have the right default route to the outside world.
The problem is definitely connected with routes. Thanks for pointing me there.
I have another router (x86) set up here and I took a look at the routes there
and I could see what was missing. It was the route with a destinati
Greg,
Yes there is
/ip address export file=ipaddr86
/ip route export file=iprout86
Then...
/import file=iproute86.rsc
/import file=ipaddr86.rsc
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
“Success is not final, failure is not fatal: it is the
I am sure Blake will agree with me. No two contracts are the same
especially in the tower business and especially when dealing with
municipalities.
If you don't like a clause submit a change request. Their will either
entertain it or say no. The other thing that might happen is they just
st
Not true in NY & NJ
-B-
Cliff wrote:
> My understanding is, even without that clause written, being a government
> they have that clause.
>
> -Original Message-
> From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
> Behalf Of RickG
> Sent: Tuesday, March 02, 2010 6:0
Wow! Thanks! How about the queues? Is there a way to export the queues? How
about the firewall filter rules, nat and mangle?
Greg
On Mar 2, 2010, at 9:23 PM, Josh Luthman wrote:
> Greg,
>
> Yes there is
>
> /ip address export file=ipaddr86
> /ip route export file=iprout86
>
> Then...
>
> /i
queue export
Ip firewall expo
Or for just mangle...
Ip firewall mangl expo
On 3/2/10, Greg Ihnen wrote:
> Wow! Thanks! How about the queues? Is there a way to export the queues? How
> about the firewall filter rules, nat and mangle?
>
> Greg
>
> On Mar 2, 2010, at 9:23 PM, Josh Luthman wrote:
>
Thanks so much!
Greg
On Mar 2, 2010, at 9:44 PM, Josh Luthman wrote:
> queue export
> Ip firewall expo
>
> Or for just mangle...
>
> Ip firewall mangl expo
>
> On 3/2/10, Greg Ihnen wrote:
>> Wow! Thanks! How about the queues? Is there a way to export the queues? How
>> about the firewall fi
Great points! For the first time since receiving this document, I sat
down at dinner tonight and went through it. I ended up with the same
questions and concerns. Thanks!
On Tue, Mar 2, 2010 at 7:34 PM, Scott Reed wrote:
> See inline for some things to question
>
> RickG wrote:
>> I dont have any
The more I do these, the more I like using a separate corporation for
the purpose. Thanks!
On Tue, Mar 2, 2010 at 9:04 PM, Bob Moldashel wrote:
> I am sure Blake will agree with me. No two contracts are the same
> especially in the tower business and especially when dealing with
> municipalities
Could I just export Interface,and all of IP, and all of Queue? That way it
would be just three files and it would have all my config. Is there anything in
the exports which is MAC address specific (specific to the x86 hardware) that
won't work in the RB750?
Thanks!
Greg
On Mar 2, 2010, at 9:23
Many cell guys do this when building sites. Each site is its own corporation
Sent from my Verizon Wireless BlackBerry
-Original Message-
From: RickG
Date: Tue, 2 Mar 2010 21:38:32
To: WISPA General List
Subject: Re: [WISPA] tower contracts
The more I do these, the more I like using a se
1 - 100 of 127 matches
Mail list logo