uild wsjtx.
73, Rick, WK1P
From: Bill Somerville
Sent: Monday, July 8, 2019 6:39 PM
To: wsjt-devel@lists.sourceforge.net
Subject: Re: [wsjt-devel] WSJT Audio Input Loss
On 08/07/2019 21:57, Rick Drexel wrote:
I started up WSJT-X on 10 meters this morning and e
On 08/07/2019 21:57, Rick Drexel wrote:
I started up WSJT-X on 10 meters this morning and expected to find it
running when I got back home. After all, there was no activity and
therefore nothing to decode. Nope, Wide Graph was frozen just as if
I'd been monitoring a contest. WSJT-X was the o
of an Internet browser???
Rick
From: Black Michael
Sent: Saturday, July 6, 2019 5:57 PM
To: WSJT software development; pe...@ni6e.com; Rick Drexel
Subject: Re: [wsjt-devel] WSJT Audio Input Loss
We've heard a few people say IE has caused audio problems.
But
Hello Hasan-
Others have this issue with Win10 on certain motherboards. I have ASUS Z97A
MB I7 4790 4 Ghz that will not run DAX reliably on Win10.
When Win10 came out tried the free upgrade and had the issue of seeing
input to WSJT-X but no decodes on several of 8 Instances running on my 6700.
Open
-devel@lists.sourceforge.net
Subject: [wsjt-devel] WSJT Audio Input Loss Greetings,
I have been using WSJT-X quite successfully for several years during
June VHF Contests. I experienced a failure of the WSJT program to accept
received audio input after several hours of proper operation durin
> To recover I have to exit out of WSJT-X and restart it.
>
> This might not be the root cause but I would put it high on my list of the
> usual suspects.
>
> 73, Rick
> WK1P
>
>
> --
> *From:* Peter Putnam
> *Sent:* Wednesday, July 3, 2
ver I have to exit out of WSJT-X and restart it.
This might not be the root cause but I would put it high on my list of the
usual suspects.
73, Rick
WK1P
From: Peter Putnam
Sent: Wednesday, July 3, 2019 3:06 PM
To: wsjt-devel@lists.sourceforge.net
Subject: [wsjt-devel] WSJT Audio Input Loss Gree
been reported by WSJT-X
during the monitoring period.
Rick WK1P
From: Black Michael via wsjt-devel
Sent: Saturday, July 6, 2019 3:35:43 PM
To: pe...@ni6e.com; WSJT software development
Cc: Black Michael
Subject: Re: [wsjt-devel] WSJT Audio Input Loss
What web
t out of WSJT-X and restart it.
>
> This might not be the root cause but I would put it high on my list of the
> usual suspects.
>
> 73, Rick
> WK1P
>
>
> --
> *From:* Peter Putnam
> *Sent:* Wednesday, July 3, 2019 3:06 PM
> *To:* wsjt-devel@lists.sourceforge.net
>
oring period.
Rick WK1P
From: Black Michael via wsjt-devel
Sent: Saturday, July 6, 2019 3:35:43 PM
To: pe...@ni6e.com; WSJT software development
Cc: Black Michael
Subject: Re: [wsjt-devel] WSJT Audio Input Loss What web browser do you use?
There aren't a lot of these report so it doesn&#
recover I have to exit out of WSJT-X and restart it.
>
> This might not be the root cause but I would put it high on my list of the
> usual suspects.
>
> 73, Rick
> WK1P
>
>
> From: Peter Putnam
> Sent: Wednesday, July 3, 2019 3:06 PM
> To: wsjt-devel@lists.s
ists.sourceforge.net
Subject: [wsjt-devel] WSJT Audio Input Loss Greetings,
I have been using WSJT-X quite successfully for several years during
June VHF Contests. I experienced a failure of the WSJT program to accept
received audio input after several hours of proper operation during the
recen
devel] WSJT Audio Input Loss
Greetings,
I have been using WSJT-X quite successfully for several years during
June VHF Contests. I experienced a failure of the WSJT program to accept
received audio input after several hours of proper operation during the
recent Field Day exercise.
I'll provi
On 7/6/19 5:59 AM, Black Michael via wsjt-devel wrote:
If you're not seeing dropout messages with the dropout debug version
than your audio stream has completely stopped.
The dropouts are only checked when the audio packets are flowing.
You should be seeing a few messages at startup about dataS
If you're not seeing dropout messages with the dropout debug version than your
audio stream has completely stopped.The dropouts are only checked when the
audio packets are flowing.You should be seeing a few messages at startup about
dataSink1 like this to ensure you're running the dropout versio
Not an issue, I monitor CPU at all times, and keep in mind, once it stops
decoding, even one time, it never resumes without a reboot.
73, N0AN
Hasan
On Fri, Jul 5, 2019 at 10:14 AM Roy Gould wrote:
> I have had the problem of the Decode button not coming on after the end of
> a receive interval
I have had the problem of the Decode button not coming on after the end of
a receive interval. In my case I found the problem to be that the computer
was being overloaded by high CPU usage of a web browser. This occurred with
Edge, Chrome, or Firefox. This high CPU usage was seen by Task Manager. T
INstalled and running Mike. Will watch for it...when it fails, it stays
failed, so all I have to do is watch the Save directory last decode having
started just now. Probably wont show until tomorrow. It'w working fine now,
but it does for hours before the first freak out.
73, N0AN
Hasan
On Fri, J
Ok, I'll check it out.
Downloading now, then will install right over the top of my existing 2.01
Tnx
73, N0AN
Hasan
On Fri, Jul 5, 2019 at 7:46 AM Black Michael wrote:
> This is version 2.0.1 with dropout debugging.
> If the decode light is not flashing then it sounds like you may have audio
This is version 2.0.1 with dropout debugging.If the decode light is not
flashing then it sounds like you may have audio dropouts occurring.This version
will show you when it fails with messages in the band activity window about
"dropout". You'll see a few messages on startup which is normal as
Ok Mike, it decoded for > 24 hours but then stopped early this morning just
before I got to the shack.
Started 07/03/2019 @ 1723
Stopped 07/05/2019 @ 0407 Both local
These are the file saved dates. Again, I had to reboot a few minutes ago to
get it to start saving files/decoding again.
The rig w
Ok, I'll check it out. Time is perfect and always is, I'm GPS locked to it.
When I got down here this morning it was still decoding full fill of
JTAlert. ...but it's only been 12 hours. (I did the remove driver, unplug
it and let Win10 reinstall it at a reboot) . That's where I am now in my
test.)
We seem to be hearing problems with a few people on both 2.0.1 and 2.1.0-rc7.
2.0.1 has been out for a long time and if this was common I'd think we would
have heard a lot more reports of the problem.Upgrading to 2.1.0-rc7 and back to
2.0.1 should (and I emphasize should) just revert completely
You should be able to check the memory usage via Task Manager to determine
whether or not it is a memory leak...
--
Thanks,
Bill
> On July 3, 2019 at 2:52 PM Hasan al-Basri wrote:
>
>
> I"m baffled, like I said, it acts like a memory leak and I don't think
> it's a coincidence that it
> On Jul 3, 2019, at 15:52, Hasan al-Basri wrote:
>
> Any further ideas are most welcome (TS-590sg, running from headphone jack for
> rx audio) Audio sounds perfect to the ear. Levels are right...
> Most peculiar!
Hasan -
As you probably remember, when you uninstall and reinstall, the old u
If a restart of WSJT-X does not recover than it sounds like your USB sound
device is locking up.If that's true just unplugging it and plugging it back in
would recover the audio (with a restart of WSJT-X too of course).
You may want to uninstall an reinstall your USB sound card. WIndows updates
On 7/3/19 at 2:52 PM, hbasri.schie...@gmail.com (Hasan al-Basri) wrote:
I"m baffled, like I said, it acts like a memory leak and I don't think it's
a coincidence that it showed up the very first time after installing and
running RC7 64 bit.
I don't know if this is relevant, but a while ago I g
I also followed the link from Mike and verified that I had already done
what he recommended...months and months ago.
It's not an RFI problem.
I've thought about uninstalling X and then going into the registry and
searching for anything related to WSJT-X and deleting it, along with any
left-over fi
You're correct in that Flex is different in that respect.
I've heard of problems with the audio chain dropping out on Flex before. Don't
recall is there was a solution though.
I wonder if the ethernet might have gone to sleep and it burped on that?
de Mike W9MDB
On Wednesday, July 3, 2019
Hi Mike,
No transmitting at all. RF Chokes all over the place. No issues running KW
out on any band 6m through 80m. (if I have just rebooted the computer).
Once it has run for several hours. it will stop decoding, whether I have
transmitted or not, no matter qrp or qro. I monitor 24x7 , go days wit
No USB ports are involved in a Flex -> DAX -> WSJT setup. Audio is
passed from one program to another in memory.
One would not suspect RFI to be the culprit after three hours of steady
operation at full power without an issue.
On 7/3/2019 2:36 PM, Black Michael via wsjt-devel wrote:
Failing
Failing audio or rig connections are most always due to RFI or USB ports going
to sleep.If RFI low power transmissions can be tested and if they work but high
power does not then it's RFI.The USB ports going to sleep can be
solved.https://www.windowscentral.com/how-prevent-windows-10-turning-usb
I’ve seen this with other radios. Definitely not a flex only issue.
Ria
N2RJ
On Wed, Jul 3, 2019 at 4:58 PM DX Jami via wsjt-devel <
wsjt-devel@lists.sourceforge.net> wrote:
> Peter,
>
> Flex has its own set of unique problems and fixes. Suggest you post your
> question on the Flex forum page.
I have been experiencing loss of decoding nearly every day ever since I
installed RC7 64 bit. I uninstalled it, and now I have the same issue with
General release 2.01. the audio level shows on the thermometer, but the
program just stops deciding. It happens after several hours of operation.
Resta
Peter,
Flex has its own set of unique problems and fixes. Suggest you post your
question on the Flex forum page. Good luck.
Danny AH6FX/W4
On Wednesday, July 3, 2019, 3:11:48 PM EDT, Peter Putnam
wrote:
Greetings,
I have been using WSJT-X quite successfully for several year
Greetings,
I have been using WSJT-X quite successfully for several years during
June VHF Contests. I experienced a failure of the WSJT program to accept
received audio input after several hours of proper operation during the
recent Field Day exercise.
I'll provide a brief outline and reply w
36 matches
Mail list logo
