I do have a 4.6 (nov. 1 build). I will try it. I am not sure what you are
trying to point out.

On Fri, Nov 2, 2012 at 7:33 AM, Kumaran <
thiru.venkateshwa...@ttplservices.com> wrote:

>  Tony,
>   I think misunderstood the scenario I'm calling internal extension to
> internal extension user who doesn't have phone and VM permission...If you
> have 4.6 setup, you can give a try my scenario...Just  create a user
> without VM permission and phone registered...Also have dial plan with
> gateway which allows any number and call newly created ext with registered
> phone users..
>
> Regards,
> Kumaran T
>
>
> On 11/2/2012 3:30 PM, Tony Graziano wrote:
>
> if the user is not registered, the call is not authorized by the system.
> it will however be able to call "into" the system but whether the call
> works or not (contact header) is another thing altogether.
>
>  To call INTO a system, you do not need permissions. I don't think we'd
> want to block incoming sip calls. That's a self defeat mechanism. Phone
> systems should accept calls.
>
>  On Fri, Nov 2, 2012 at 5:22 AM, Kumaran <
> thiru.venkateshwa...@ttplservices.com> wrote:
>
>>   On 11/2/2012 2:35 PM, George Niculae wrote:
>>
>> On Fri, Nov 2, 2012 at 11:03 AM, Kumaran <
>> thiru.venkateshwa...@ttplservices.com> wrote:
>>
>>>   On 11/2/2012 2:26 PM, George Niculae wrote:
>>>
>>> On Fri, Nov 2, 2012 at 10:51 AM, Kumaran <
>>> thiru.venkateshwa...@ttplservices.com> wrote:
>>>
>>>>   On 11/2/2012 1:19 PM, George Niculae wrote:
>>>>
>>>> On Fri, Nov 2, 2012 at 9:32 AM, Kumaran <
>>>> thiru.venkateshwa...@ttplservices.com> wrote:
>>>>
>>>>>   On 11/2/2012 12:56 PM, George Niculae wrote
>>>>>
>>>>>  I checked in 4.6 George...No issues with other extension..Only user
>>>>> extension is having issue...If VM or phone  is enabled then  Registrar
>>>>> consider this as a valid internal Extension so call will directed
>>>>> particular user..But if user doesn't have phone and vm then registrar not
>>>>> considering as internal extension and process it through local dial plan
>>>>> because it has permission for allow calls with any number...
>>>>>
>>>>>
>>>>  When you say "user 201 without phone " this means without phone
>>>> registered?
>>>>
>>>> George
>>>>
>>>>  Yes George...No phone assigned to user 201...
>>>>
>>>
>>>  Please bare with me - there's a difference between no phone assigned
>>> to user 201 (which could mean no phone configured in sipXconfig) and no
>>> phone registered for that user (you can register phones that are not
>>> managed by sipxecs). So if no phone registered, where is this call
>>> established in step 5 of your scenario?
>>>
>>>   5.user 200  call established with FXO
>>>
>>>  Thanks
>>> George
>>>
>>>  I mean registered and assigned are same meaning(no phone configured or
>>> register in sipXconfig for user 201)...Consider 201 is newly created user
>>> without VM permission...Wrt pt-5 Local dial plan allow any numbers so
>>> register is sending contact  in 302 moved temp as -- Contact: <sip:201@*
>>> 176.25.3.31*(FXO ip
>>> address);user=phone;sipxecs-lineid=1;sipXecs-CallDest=LOCL?expires=7200&ROUTE=%3Csip%
>>> 3Asipx-test.ttplservices.com%3Blr%3E>;q=0.9 and establish the call
>>>
>>>
>>  So call between 200 and 201 is established but 201 doesn't have phone
>> registered?
>>
>>  George
>>
>>     Yes George but  201 will be considered as outside number and not
>> internal number...
>>
>> Regards,
>> Kumaran T
>>
>> _______________________________________________
>> sipx-dev mailing list
>> sipx-dev@list.sipfoundry.org
>> List Archive: http://list.sipfoundry.org/archive/sipx-dev/
>>
>
>
>
>  --
> ~~~~~~~~~~~~~~~~~~
> Tony Graziano, Manager
> Telephone: 434.984.8430
> sip: tgrazi...@voice.myitdepartment.net
> Fax: 434.465.6833
> ~~~~~~~~~~~~~~~~~~
> Linked-In Profile:
> http://www.linkedin.com/pub/tony-graziano/14/4a6/7a4
> Ask about our Internet Fax services!
> ~~~~~~~~~~~~~~~~~~
>
>  Using or developing for sipXecs from SIPFoundry? Ask me about sipX-CoLab
> 2013!
>  <http://sipxcolab2013.eventbrite.com/?discount=tony2013>
>
>
> LAN/Telephony/Security and Control Systems Helpdesk:
> Telephone: 434.984.8426
> sip: helpdesk@voice.myitdepartment.**net<helpd...@voice.myitdepartment.net>
>
>  Helpdesk Customers: 
> http://myhelp.myitdepartment.**net<http://myhelp.myitdepartment.net>
> Blog: http://blog.myitdepartment.net
>
>
> _______________________________________________
> sipx-dev mailing listsipx-...@list.sipfoundry.org
> List Archive: http://list.sipfoundry.org/archive/sipx-dev/
>
>
>


-- 
~~~~~~~~~~~~~~~~~~
Tony Graziano, Manager
Telephone: 434.984.8430
sip: tgrazi...@voice.myitdepartment.net
Fax: 434.465.6833
~~~~~~~~~~~~~~~~~~
Linked-In Profile:
http://www.linkedin.com/pub/tony-graziano/14/4a6/7a4
Ask about our Internet Fax services!
~~~~~~~~~~~~~~~~~~

Using or developing for sipXecs from SIPFoundry? Ask me about sipX-CoLab
2013!
<http://sipxcolab2013.eventbrite.com/?discount=tony2013>

-- 
LAN/Telephony/Security and Control Systems Helpdesk:
Telephone: 434.984.8426
sip: helpd...@voice.myitdepartment.net

Helpdesk Customers: http://myhelp.myitdepartment.net
Blog: http://blog.myitdepartment.net
_______________________________________________
sipx-dev mailing list
sipx-dev@list.sipfoundry.org
List Archive: http://list.sipfoundry.org/archive/sipx-dev/

Reply via email to