For initial setup, I'd ditch the second NIC. For the zone definition, make sure the nic_tag is same as the GZ. (Should be "admin")
Also, this might be obvious, but you're showing IP's of 192.168.x.x, but subnet mask of 255.255.255.0, so... double check the basics? On Wed, Aug 30, 2017 at 4:21 PM, Michael Cooper <[email protected]> wrote: > Hello Guys, > > I am very new to smartOS and I am having issue with networking > when creating zones the GZ works fine and is set to admin tag. The ip is on > my 192.168.x.x subnet, I have also tried to add a second nic because I > thought that would help. So I create the zone and on the GZ I can ping the > gateway and I can ping outside (the internet). I can also ping the zone > from the GZ and I can ping the GZs ip. However when I ping the gateway > which is a 192.168.xxx.x also, from inside the created zone it times out. > > SmartOS build: 20170216T015949Z for head node and zone > > GZ > > host > > ip: 192.168.x.x > > netmask 255.255.255.0 > > gateway: 192.168.xxx.x > > host2 > > ip: 192.168.x.xx > > netmask: same as above > > gateway: same as above > > Thanks, > > Michael A Cooper > > Linux Systems Admin > > I am really confused on the network setup here please help. > > smartos > ------------------------------------------- smartos-discuss Archives: https://www.listbox.com/member/archive/184463/=now RSS Feed: https://www.listbox.com/member/archive/rss/184463/25769125-55cfbc00 Modify Your Subscription: https://www.listbox.com/member/?member_id=25769125&id_secret=25769125-7688e9fb Powered by Listbox: http://www.listbox.com
