Thanks for the quick response
Okay, So I thought a Class C was 255.255.255.0, I must be missing
something sorry.
Michael Cooper
Linux Systems Admin
On 8/30/2017 7:53 PM, Matthew Parsons wrote:
For initial setup, I'd ditch the second NIC. For the zone definition,
make sure the nic_tag is same as the GZ. (Should be "admin")
Also, this might be obvious, but you're showing IP's of 192.168.x.x,
but subnet mask of 255.255.255.0, so... double check the basics?
On Wed, Aug 30, 2017 at 4:21 PM, Michael Cooper <[email protected]
<mailto:[email protected]>> wrote:
Hello Guys,
I am very new to smartOS and I am having issue with
networking when creating zones the GZ works fine and is set to
admin tag. The ip is on my 192.168.x.x subnet, I have also tried
to add a second nic because I thought that would help. So I create
the zone and on the GZ I can ping the gateway and I can ping
outside (the internet). I can also ping the zone from the GZ and I
can ping the GZs ip. However when I ping the gateway which is a
x also, from inside the created zone it times out.
SmartOS build: 20170216T015949Z for head node and zone
GZ
host
ip: 192.168.x.x
netmask 255.255.255.0
gateway: 192.168.xxx.x
host2
ip: 192.168.x.xx
netmask: same as above
gateway: same as above
Thanks,
Michael A Cooper
Linux Systems Admin
I am really confused on the network setup here please help.
smartos
*smartos-discuss* | Archives
<https://www.listbox.com/member/archive/184463/=now>
<https://www.listbox.com/member/archive/rss/184463/29197591-a2127e31>
| Modify
<https://www.listbox.com/member/?&;>
Your Subscription [Powered by Listbox] <http://www.listbox.com>
-------------------------------------------
smartos-discuss
Archives: https://www.listbox.com/member/archive/184463/=now
RSS Feed: https://www.listbox.com/member/archive/rss/184463/25769125-55cfbc00
Modify Your Subscription:
https://www.listbox.com/member/?member_id=25769125&id_secret=25769125-7688e9fb
Powered by Listbox: http://www.listbox.com
