On 8/31/2017 2:17 PM, Steve wrote:
On 08/31/2017 12:58, Michael Cooper wrote:
So okay
The network to the internet is 192.168.1.0/24
<http://192.168.1.0/24> and the other is more management and storage
network 192.168.10.0/24 <http://192.168.10.0/24>
When you say 'network to the internet' you mean that it will be used to
reach the border gateway, not that you are trying to have 192.168.1.0 be
on the internet?
Correct, I am sorry for misspeaking. It is not on the internet it just
has access to the internet.
Your setup appears more complex than I think I would have done, not
knowing what issues you are trying to solve.
My setup is 4 servers a cable modem and a cisco 3750 switch because I
need two network segments plus networking is a major challenge for me.
I have a border GW and firewall, inside it I have a subnet which hosts
all actual and virtual hosts. In other words my VMs are all on the same
subnet so they are easily accessible. The SmartOS has one IP and all the
virtual machines is one IP each down from it.
No additional subnets to route and manage.
Of course you may want to do some work inside a subnet that should not
be reachable or able to escape from it. Or too many hosts to fit...
Yes sir that is what I would like just not sure how to implement it.
Also should the zones be able to access the internet?
Thanks for your response.
-------------------------------------------
smartos-discuss
Archives: https://www.listbox.com/member/archive/184463/=now
RSS Feed: https://www.listbox.com/member/archive/rss/184463/25769125-55cfbc00
Modify Your Subscription:
https://www.listbox.com/member/?member_id=25769125&id_secret=25769125-7688e9fb
Powered by Listbox: http://www.listbox.com
