Sponsored by TWIST - Tablet Weavers International Studies & Techniques
My problem is, I'm having tension issues side to side.
It's relatively minor, but it's bugging me. The
edges are packing tighter than the middle. I usually
can redistribute this kind of thing by pinching and
pulling the threads to spread them, but it doesn't
seem to be working. I'm already using a warp spreader,
but can't spread it too wide or the warp will fall off
the loom.
I had the same problem the last time I used alot of tablets, though it
wasn't as noticeable with the pattern I was weaving. Because I was using a
warp-weighted loom, (which has a comb-like bar at the end) I found that I
fixed it somewhat by closing in the central threads - that is, more than
one on a 'tooth'. This helped a bit, but not alot!
I also currently weave at the side of the loom, with the cloth beam on my
left. I have found that even on smaller bands my 'top' edge seems to be
closer together than my 'bottom' (ie the left side of the band). However,
if I weave by sitting over the cloth beam, so that the band works out in
front of me, I haven't noticed the same problem. So, I suspected that it
has something to do with the way I pull the warp.
Gina
--
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.5.467 / Virus Database: 269.6.5/793 - Release Date: 07/05/2007 14:55
Send private reply to Gina-B Silkwork <[EMAIL PROTECTED]>
-----------------------------------------------------------
To stop receiving tabletweaving (not tabletweaving-digest), send email
to [EMAIL PROTECTED] with the message: unsubscribe tabletweaving.
To stop receiving tabletweaving-digest, see the end of a digest.
