Antonio is in Italy and they do have loran still. I have seen the e's on mine and I believe you get that if you do not feed an external reference into it. Regards
On Thu, Oct 21, 2010 at 6:55 PM, Chuck Harris <cfhar...@erols.com> wrote: > Are you sure that your Loran chain is still up? In the US and > Canada, Loran has been decommissioned. > > -Chuck Harris > > > asma...@fc.up.pt wrote: > >> Hello! >> >> After power up, my 2100F Loran-C receiver displays >> (E 1002048) followed by (E-20), as usually, but recently >> I have a trouble: after that the TRACKING led goes RED >> still and the display shows (- E - - - E). >> Running the test subroutines 1 to 4 everything seems >> to be OK but the fault persists. >> Entering the sequence (0, STATUS, 6) doesn't clear the >> error. >> Does someone knows how to make a deep reset for >> clearing all the errors? >> >> Thanks in advance. >> Antonio >> CT1TE >> >> >> _______________________________________________ >> time-nuts mailing list -- time-nuts@febo.com >> To unsubscribe, go to >> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts >> and follow the instructions there. >> >> > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.