Dear All,
Diving into the hardware, I found the DC-DC +5 to +/-12 V Power Source
defective. There may be something more but that is serious enough.
Thank you for your kind attention and help.
Antonio
CT1TE
Quoting paul swed <paulsw...@gmail.com>:
Thats what I was thinking also on the reference and emailed back to the
group.
I believe over time that internal switch to select 1,5,10 mc can get a bit
touchy.
If a operating reference is connected and checked to be correct toggle the
switch a few times to clean its contacts. It gets lonely sitting in there by
itself for years. ;-)
Regards
Paul.
On Fri, Oct 22, 2010 at 8:12 AM, Chuck Harris <cfhar...@erols.com> wrote:
Hi Antonio,
Ok. I just wanted to be sure that it was still up in Europe. Canada
dropped their chains 3 months earlier than they said they would. And
since Loran-C is no longer usable world wide, I figure Europe will be
dropping their chain soon.
The error indication you have described tells me that you have no
reference oscillator. This could be for a couple of reasons:
1) you have no frequency standard connected to your 2100F
2) the switch, labeled 1-5-10, on the board stack visible when you hinge
open the front panel is set incorrectly for your external frequency
standard.
3) Your 2100F is broken.
-Chuck Harris
asma...@fc.up.pt wrote:
Chuck,
I am in Portugal, currently receiving the European
6731 LESSAY Chain.
Best regards,
Antonio
CT1TE
Quoting Chuck Harris <cfhar...@erols.com>:
Are you sure that your Loran chain is still up? In the US and
Canada, Loran has been decommissioned.
_______________________________________________
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
_______________________________________________
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
_______________________________________________
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.