The first E seems to indicate "Normal tracking has been halted due to loss (or temporary interuption) of the external reference"
The last E = "not yet in tracking mode" Doug K8ZN > -----Original Message----- > From: time-nuts-boun...@febo.com [mailto:time-nuts- > boun...@febo.com] On Behalf Of asma...@fc.up.pt > Sent: Thursday, October 21, 2010 2:46 PM > To: time-nuts@febo.com > Subject: [time-nuts] Austron 2100F > > Hello! > > After power up, my 2100F Loran-C receiver displays (E 1002048) followed by > (E-20), as usually, but recently I have a trouble: after that the TRACKING led > goes RED still and the display shows (- E - - - E). > Running the test subroutines 1 to 4 everything seems to be OK but the fault > persists. > Entering the sequence (0, STATUS, 6) doesn't clear the error. > Does someone knows how to make a deep reset for clearing all the errors? > > Thanks in advance. > Antonio > CT1TE > > > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.