Thanks will do some checking and order the right connectors Paul. On Sun, Nov 25, 2012 at 11:40 AM, J. L. Trantham <[email protected]> wrote:
> I stand corrected. > > My 5089 definitely uses the same connector as the 5061A. > > However, my 5085 uses a smaller connector, a DMS3106A10SL-3S. > > http://www.galco.com/buy/DDK/DMS3106A10SL-3S > > It uses a smaller clamp and strain relief, a DMS3057-4A, though I had to > remove the strain relief due to the size of the cable I used to connect to > 120 VAC. > > http://www.galco.com/buy/DDK/DMS3057-4A > > Sorry for the misleading info, but, perhaps, there are two different > connectors for the 5085, depending on age/serial number of the equipment. > > Joe > > -----Original Message----- > From: [email protected] [mailto:[email protected]] On > Behalf Of J. L. Trantham > Sent: Saturday, November 24, 2012 9:36 PM > To: 'Discussion of precise time and frequency measurement' > Subject: Re: [time-nuts] 5061A AC Power connector > > > Paul, > > According to the 5089 manual, the power connector is the same. Both the > 5085 and 5089 call for the same HP part number for the AC power cord. > Therefore, I suspect they are the same. > > I have a 5085 hooked up and I can make sure tomorrow if you need it. > > Joe > > -----Original Message----- > From: [email protected] [mailto:[email protected]] On > Behalf Of paul swed > Sent: Saturday, November 24, 2012 9:06 PM > To: Discussion of precise time and frequency measurement > Subject: Re: [time-nuts] 5061A AC Power connector > > > I hoped it helped also. I know it did for me. Will order 2 sets so I can > finally have real connectors on the 5061 and 5065. I wonder if its the same > for the standby power supply may need to order 3. Regards Paul WB8TSL > > On Sat, Nov 24, 2012 at 9:35 PM, J. L. Trantham <[email protected]> wrote: > > > Pete, > > > > In the US, Galco sells a DDK product that works well. The connector > > and shell are a DMS3106A18-22S. > > > > http://www.galco.com/buy/DDK/DMS3106A18-22S > > > > You will also need a clamp and strain relief. I use a DMS3057-10A. > > > > http://www.galco.com/buy/DDK/DMS3057-10A > > > > It is the same connector as a 5065A though you have to be careful > > about the wiring. Some of the 5065A's are the same as the 5061A and > > others are different. > > > > Hope this helps. > > > > Joe > > > > -----Original Message----- > > From: [email protected] [mailto:[email protected]] > > On Behalf Of Pete Lancashire > > Sent: Saturday, November 24, 2012 6:51 PM > > To: Discussion of precise time and frequency measurement > > Subject: [time-nuts] 5061A AC Power connector > > > > What is the MS type for the power plug for a 5061A ? > > > > I could not find it in the PDF I have. > > > > -pete > > > > _______________________________________________ > > time-nuts mailing list -- [email protected] To unsubscribe, go to > > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > > and follow the instructions there. > > > > > > _______________________________________________ > > time-nuts mailing list -- [email protected] > > To unsubscribe, go to > > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > > and follow the instructions there. > > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
