tinc  

Messages by Date

• 2017/09/13 Re: Packet capture to analysis the tinc connection close Guus Sliepen
• 2017/09/12 purge doesn't remove dead nodes Nirmal Thacker
• 2017/09/11 Docker container for Raspberry Pi Guillermo Bisheimer
• 2017/09/10 Will couple of packets drop when in-frequent traffic go through tinc? Bright Zhao
• 2017/09/08 Re: A FAQ: is it mandatory to include the local IP address classes in the global VPN address class? Răzvan Sandu
• 2017/09/07 Re: Packet capture to analysis the tinc connection close Bright Zhao
• 2017/09/07 Re: Packet capture to analysis the tinc connection close Bright Zhao
• 2017/09/07 Re: A FAQ: is it mandatory to include the local IP address classes in the global VPN address class? Guus Sliepen
• 2017/09/07 Re: Packet capture to analysis the tinc connection close Guus Sliepen
• 2017/09/07 A FAQ: is it mandatory to include the local IP address classes in the global VPN address class? Răzvan Sandu
• 2017/09/06 Re: [Announcement] Tinc versions 1.0.32 and 1.1pre15 released Etienne Dechamps
• 2017/09/06 Re: [Announcement] Tinc versions 1.0.32 and 1.1pre15 released Guillermo Bisheimer
• 2017/09/05 Re: [Announcement] Tinc versions 1.0.32 and 1.1pre15 released Etienne Dechamps
• 2017/09/05 Re: [Announcement] Tinc versions 1.0.32 and 1.1pre15 released Guillermo Bisheimer
• 2017/09/04 Packet capture to analysis the tinc connection close Bright Zhao
• 2017/09/04 Re: [Announcement] Tinc versions 1.0.32 and 1.1pre15 released Guus Sliepen
• 2017/09/04 Re: request for advice to increase throughput and lower latency Guus Sliepen
• 2017/09/04 Re: [Announcement] Tinc versions 1.0.32 and 1.1pre15 released Nirmal Thacker
• 2017/09/04 request for advice to increase throughput and lower latency Jelle de Jong
• 2017/09/02 [Announcement] Tinc versions 1.0.32 and 1.1pre15 released Guus Sliepen
• 2017/09/02 Re: Can't use proxy after client upgrade Nikolaus Rath
• 2017/09/01 Got KEY_CHANGED from A (x.x.x.x port 655) origin B which does not exist Bright Zhao
• 2017/08/31 Re: using both ConnectTo and AutoConnect to avoid network partitions Nirmal Thacker
• 2017/08/31 Re: using both ConnectTo and AutoConnect to avoid network partitions Guus Sliepen
• 2017/08/31 Re: using both ConnectTo and AutoConnect to avoid network partitions Nirmal Thacker
• 2017/08/31 Re: using both ConnectTo and AutoConnect to avoid network partitions Guus Sliepen
• 2017/08/31 Re: using both ConnectTo and AutoConnect to avoid network partitions Nirmal Thacker
• 2017/08/29 Re: Behavior like -R and -L SSH Guus Sliepen
• 2017/08/28 Behavior like -R and -L SSH Rafael Wolf
• 2017/08/24 Re: using both ConnectTo and AutoConnect to avoid network partitions Guus Sliepen
• 2017/08/23 Re: using both ConnectTo and AutoConnect to avoid network partitions Nirmal Thacker
• 2017/08/23 Re: Tinc VPN for unjailbroken iOS 9+ Paul Chobert
• 2017/08/23 Re: What if two tinc daemons received the same Subnet but with different weight? Guus Sliepen
• 2017/08/23 Re: What if two tinc daemons received the same Subnet but with different weight? Bright Zhao
• 2017/08/23 Re: How to set tinc not to forward Subnet learned from other nodes? Bright Zhao
• 2017/08/22 Re: How to set tinc not to forward Subnet learned from other nodes? Guus Sliepen
• 2017/08/22 Re: What if two tinc daemons received the same Subnet but with different weight? Guus Sliepen
• 2017/08/22 Re: using both ConnectTo and AutoConnect to avoid network partitions Guus Sliepen
• 2017/08/22 Re: using both ConnectTo and AutoConnect to avoid network partitions Nirmal Thacker
• 2017/08/22 Re: using both ConnectTo and AutoConnect to avoid network partitions Guus Sliepen
• 2017/08/21 using both ConnectTo and AutoConnect to avoid network partitions Nirmal Thacker
• 2017/08/18 What if two tinc daemons received the same Subnet but with different weight? Bright Zhao
• 2017/08/18 How to set tinc not to forward Subnet learned from other nodes? Bright Zhao
• 2017/08/12 Re: The reconnect timer can be adjusted in 1.0.31? Guus Sliepen
• 2017/08/12 Re: The reconnect timer can be adjusted in 1.0.31? Bright Zhao
• 2017/08/12 Re: The reconnect timer can be adjusted in 1.0.31? Guus Sliepen
• 2017/08/12 Re: The reconnect timer can be adjusted in 1.0.31? Bright Zhao
• 2017/08/11 Re: Tinc encryption with intermediate hosts Guus Sliepen
• 2017/08/11 Re: The reconnect timer can be adjusted in 1.0.31? Guus Sliepen
• 2017/08/10 The reconnect timer can be adjusted in 1.0.31? Bright Zhao
• 2017/08/05 Tinc encryption with intermediate hosts Jan Ernsting
• 2017/08/01 Re: tincd 1.0.26 terminates with. "Name for tinc daemon required!" Guus Sliepen
• 2017/08/01 tincd 1.0.26 terminates with. "Name for tinc daemon required!" Lorenz Wenner
• 2017/07/30 Re: Can't use proxy after client upgrade Nikolaus Rath
• 2017/07/30 Re: Can't use proxy after client upgrade Guus Sliepen
• 2017/07/29 Re: Can't use proxy after client upgrade Guus Sliepen
• 2017/07/29 Re: Can't use proxy after client upgrade Nikolaus Rath
• 2017/07/26 /usr/sbin/tinc --net=pluto dump edges Perry Couprie
• 2017/07/26 Re: Tinc VPN for unjailbroken iOS 9+ Ryan Mounce
• 2017/07/26 Re: Tinc VPN for unjailbroken iOS 9+ Bright Zhao
• 2017/07/26 Tinc VPN for unjailbroken iOS 9+ Paul Chobert
• 2017/07/25 Re: How to block tinc node advertise it's neighbor/edge/subnet info to another node? Raul Dias
• 2017/07/25 Re: How to block tinc node advertise it's neighbor/edge/subnet info to another node? Bright Zhao
• 2017/07/25 Re: How to block tinc node advertise it's neighbor/edge/subnet info to another node? Raul Dias
• 2017/07/25 How to block tinc node advertise it's neighbor/edge/subnet info to another node? Bright Zhao
• 2017/07/18 What's the possible cause of UDP probe failure? Bright Zhao
• 2017/07/12 Re: Some tinc clatifications Alessandro Briosi
• 2017/07/11 Re: Some tinc clatifications Azul
• 2017/07/11 Re: Some tinc clatifications Guus Sliepen
• 2017/07/11 Re: Can't use proxy after client upgrade Guus Sliepen
• 2017/07/11 Re: Some tinc clatifications Alessandro Briosi
• 2017/07/10 RE: Some tinc clatifications Matthew Nichols
• 2017/07/10 Some tinc clatifications Alessandro Briosi
• 2017/07/03 Can't use proxy after client upgrade Nikolaus Rath
• 2017/07/01 Are there any known issues in 1.1pre14? Nirmal Thacker
• 2017/06/24 Re: Significance of port 655? Guus Sliepen
• 2017/06/23 Re: Significance of port 655? Nirmal Thacker
• 2017/06/22 Re: Significance of port 655? Guus Sliepen
• 2017/06/22 Re: How to diagnostic UDP discovery failed situation Guus Sliepen
• 2017/06/21 Significance of port 655? Nirmal Thacker
• 2017/06/20 Re: How to diagnostic UDP discovery failed situation Bright Zhao
• 2017/06/20 How to diagnostic UDP discovery failed situation Bright Zhao
• 2017/06/18 Re: Reliability between TCPonly and UDP for tinc? Bright Zhao
• 2017/06/18 Why sometimes the MTU discovery by UDP never get a response? Bright Zhao
• 2017/06/18 Re: Reliability between TCPonly and UDP for tinc? hvjunk
• 2017/06/18 Re: Reliability between TCPonly and UDP for tinc? Bright Zhao
• 2017/06/18 Re: Reliability between TCPonly and UDP for tinc? hvjunk
• 2017/06/18 Reliability between TCPonly and UDP for tinc? Bright Zhao
• 2017/06/12 Segfault with 1.1 Keith
• 2017/06/07 Tinc still run on single core of CPU? Bright Zhao
• 2017/06/02 I've stumbled across weird chain of multiple failures Sergey Frolov
• 2017/06/02 Re: Cache of the the unreachable nodes cause un-optimized route? Saverio Proto
• 2017/05/31 Cache of the the unreachable nodes cause un-optimized route? Bright Zhao
• 2017/05/27 Re: Replacing of non-alphanumeric chars in Name can be confusing Guus Sliepen
• 2017/05/27 Re: How can I resolve the "abc (x.x.x.x port 655) could not flush for 14 seconds (15846 bytes remaining)" Guus Sliepen
• 2017/05/27 Re: What/why this event happens: Can't write to Linux tun/tap device (tun mode) /dev/net/tun: Input/output error Guus Sliepen
• 2017/05/27 Replacing of non-alphanumeric chars in Name can be confusing Niklas Hambüchen
• 2017/05/27 How can I resolve the "abc (x.x.x.x port 655) could not flush for 14 seconds (15846 bytes remaining)" Bright Zhao
• 2017/05/26 Re: What/why this event happens: Can't write to Linux tun/tap device (tun mode) /dev/net/tun: Input/output error Bright Zhao
• 2017/05/26 Re: What/why this event happens: Can't write to Linux tun/tap device (tun mode) /dev/net/tun: Input/output error Guus Sliepen
• 2017/05/26 Re: Does the INT signal will force the tinc to re-read the tinc.conf file Guus Sliepen
• 2017/05/25 Re: What/why this event happens: Can't write to Linux tun/tap device (tun mode) /dev/net/tun: Input/output error Bright Zhao
• 2017/05/25 What/why this event happens: Can't write to Linux tun/tap device (tun mode) /dev/net/tun: Input/output error Bright Zhao
• 2017/05/24 Does the INT signal will force the tinc to re-read the tinc.conf file Bright Zhao
• 2017/05/24 How to improve/resolve the Flushing xxx bytes to node would block? Bright Zhao
• 2017/05/22 Re: Advertising a Public IP address Keith Whyte
• 2017/05/22 Re: Advertising a Public IP address Keith Whyte
• 2017/05/22 Re: How can I change the speed of tun interface? Guus Sliepen
• 2017/05/22 Re: Advertising a Public IP address Guus Sliepen
• 2017/05/22 Re: Advertising a Public IP address David Nicol
• 2017/05/22 Re: Advertising a Public IP address Keith Whyte
• 2017/05/22 Re: Advertising a Public IP address hvjunk
• 2017/05/22 Advertising a Public IP address Keith Whyte
• 2017/05/18 Re: Improving packets/sec and data rate - v1.0.24 Martin Eskdale Moen
• 2017/05/17 How can I change the speed of tun interface? Bright Zhao
• 2017/05/17 Re: Improving packets/sec and data rate - v1.0.24 Naemr .
• 2017/05/17 Re: Improving packets/sec and data rate - v1.0.24 Jared Ledvina
• 2017/05/17 Any speed limit suggestion for tinc? Bright Zhao
• 2017/05/17 Re: Improving packets/sec and data rate - v1.0.24 Niklas Hambüchen
• 2017/05/17 Re: Improving packets/sec and data rate - v1.0.24 Jared Ledvina
• 2017/05/17 Re: Any way to set the subnet/suggest of invitation? Guus Sliepen
• 2017/05/17 Re: Improving packets/sec and data rate - v1.0.24 Niklas Hambüchen
• 2017/05/17 Re: Improving packets/sec and data rate - v1.0.24 Martin Eskdale Moen
• 2017/05/17 Re: Improving packets/sec and data rate - v1.0.24 Jared Ledvina
• 2017/05/17 Any way to set the subnet/suggest of invitation? Martin Eskdale Moen
• 2017/05/17 Improving packets/sec and data rate - v1.0.24 Jared Ledvina
• 2017/05/11 Re: LocalDiscovery flip flopping and network design tips John Griessen
• 2017/05/11 Re: LocalDiscovery flip flopping and network design tips Etienne Dechamps
• 2017/05/11 Re: What's the weight means in the dump of edge info from USR2? Bright Zhao
• 2017/05/11 Re: tinc to create VPN between cluster nodes (at different datacenters) for High Availability John Griessen
• 2017/05/10 Re: What's the weight means in the dump of edge info from USR2? Guus Sliepen
• 2017/05/10 Re: If two identical host get up, what will happen? Guus Sliepen
• 2017/05/10 Re: LocalDiscovery flip flopping and network design tips James Hartig
• 2017/05/10 Re: What's the weight means in the dump of edge info from USR2? Bright Zhao
• 2017/05/10 Re: If two identical host get up, what will happen? Bright Zhao
• 2017/05/10 Re: If two identical host get up, what will happen? Azul
• 2017/05/10 Re: What's the weight means in the dump of edge info from USR2? Guus Sliepen
• 2017/05/10 Re: tinc to create VPN between cluster nodes (at different datacenters) for High Availability Guus Sliepen
• 2017/05/10 Re: If two identical host get up, what will happen? Guus Sliepen
• 2017/05/10 What's the weight means in the dump of edge info from USR2? Bright Zhao
• 2017/05/09 Re: Show the subnets learnt and update configuration without reset? Bright Zhao
• 2017/05/09 tinc to create VPN between cluster nodes (at different datacenters) for High Availability John Griessen
• 2017/05/09 RE: Show the subnets learnt and update configuration without reset? Matthew Nichols
• 2017/05/09 If two identical host get up, what will happen? Bright Zhao
• 2017/05/06 Show the subnets learnt and update configuration without reset? Bright Zhao
• 2017/05/05 Re: How tinc route traffic when two subnets are identical? Sven-Haegar Koch
• 2017/05/05 Re: How tinc route traffic when two subnets are identical? Guus Sliepen
• 2017/05/05 Re: How tinc route traffic when two subnets are identical? Dave Warren
• 2017/05/05 Re: Subnet authority and trust Etienne Dechamps
• 2017/05/05 Re: Subnet authority and trust Sven-Haegar Koch
• 2017/05/04 Subnet authority and trust Parke
• 2017/05/04 Re: How tinc route traffic when two subnets are identical? Pierre Emeriaud
• 2017/05/04 Re: How tinc route traffic when two subnets are identical? Guus Sliepen
• 2017/05/04 Re: How tinc route traffic when two subnets are identical? Lars Kruse
• 2017/05/04 How tinc route traffic when two subnets are identical? Bright Zhao
• 2017/05/03 Re: Multiple default gateway from tinc node Bright Zhao
• 2017/05/03 Re: Multi tenancy setup by Tinc? Guus Sliepen
• 2017/05/03 Re: Multiple default gateway from tinc node Guus Sliepen
• 2017/05/02 Re: Multi tenancy setup by Tinc? Bright Zhao
• 2017/05/02 Re: Multiple default gateway from tinc node Bright Zhao
• 2017/05/02 Re: Different UDP and TCP ports? Ivo Smits
• 2017/05/02 Re: Different UDP and TCP ports? Peter Whisker
• 2017/05/02 Re: Different UDP and TCP ports? Guus Sliepen
• 2017/05/02 Different UDP and TCP ports? Peter Whisker
• 2017/05/02 Re: Multi tenancy setup by Tinc? Guus Sliepen
• 2017/05/02 Re: Multiple default gateway from tinc node Guus Sliepen
• 2017/05/02 Re: Multiple default gateway from tinc node Lars Kruse
• 2017/05/02 Re: Multiple default gateway from tinc node Bright Zhao
• 2017/05/02 Re: Multiple default gateway from tinc node Bright Zhao
• 2017/05/02 Multi tenancy setup by Tinc? Bright Zhao
• 2017/05/02 Re: Multiple default gateway from tinc node Lars Kruse
• 2017/05/02 Re: Multiple default gateway from tinc node Narcissus Emi
• 2017/05/01 Re: Multiple default gateway from tinc node Bright Zhao
• 2017/05/01 Re: Multiple default gateway from tinc node Guus Sliepen
• 2017/05/01 Re: Multiple default gateway from tinc node Bright Zhao
• 2017/05/01 Re: Multiple default gateway from tinc node Lars Kruse
• 2017/05/01 Re: How to set Subnet in a node which act as both server and client role? LowEel
• 2017/05/01 Multiple default gateway from tinc node Bright Zhao
• 2017/05/01 Multiple default gateway from tinc node Bright Zhao
• 2017/05/01 Re: How to set Subnet in a node which act as both server and client role? Etienne Dechamps
• 2017/05/01 Re: How to set Subnet in a node which act as both server and client role? Bright Zhao
• 2017/05/01 Re: How to set Subnet in a node which act as both server and client role? Bright Zhao
• 2017/05/01 Re: Concept clarification between multiple ConnecTo and multiple netname LowEel
• 2017/05/01 Re: Concept clarification between multiple ConnecTo and multiple netname Etienne Dechamps
• 2017/05/01 Re: Concept clarification between multiple ConnecTo and multiple netname Bright Zhao
• 2017/05/01 Re: How to set Subnet in a node which act as both server and client role? LowEel
• 2017/05/01 Re: How to set Subnet in a node which act as both server and client role? Etienne Dechamps
• 2017/05/01 Re: How to set Subnet in a node which act as both server and client role? Etienne Dechamps
• 2017/05/01 Re: Concept clarification between multiple ConnecTo and multiple netname Etienne Dechamps
• 2017/05/01 Re: How to set Subnet in a node which act as both server and client role? Bright Zhao
• 2017/05/01 Re: How to set Subnet in a node which act as both server and client role? Bright Zhao
• 2017/05/01 How to set Subnet in a node which act as both server and client role? Bright Zhao
• 2017/05/01 Re: Why host-up script triggered even not ConnectTo? Bright Zhao
• 2017/05/01 Re: Why host-up script triggered even not ConnectTo? Narcissus Emi
• 2017/05/01 Re: Why host-up script triggered even not ConnectTo? Bright Zhao
• 2017/05/01 Re: Why host-up script triggered even not ConnectTo? Narcissus Emi
• 2017/05/01 Re: Why host-up script triggered even not ConnectTo? Narcissus Emi
• 2017/05/01 Re: Why host-up script triggered even not ConnectTo? Bright Zhao
• 2017/05/01 Re: Why host-up script triggered even not ConnectTo? Narcissus Emi
• 2017/04/30 Why host-up script triggered even not ConnectTo? Bright Zhao

• Earlier messages
• Later messages