Jay, Where did you put the vent in the head? I was thinking of doing that, but could not decide on a good location for one. I think I might just leave the double berth and head windows as sliders.
Thanks, Victor On Feb 12, 12:43 am, TANGOSIX <[email protected]> wrote: > Victor, I to have a 36 SS 1976,I addressed the same issue.I wanted a > DRY boat. I live in Arkansas so we have a lot of hot humid weather and > get alot of strong thunderstorms. I removed all windows,replaced > sliders with rigid dark tint safety glass.I am very happy with this > setup.Downside,ventalation.on a nice day you can always open aft hatch > and rear door.As another wrote,you really cant keep it dry with > factory setup.The boat not only stays dry in the worst weather,it > looks like a new boat.I also replaced windshield glass.Went to dark > and will be replacing those again,a good hail storm broke one > anyway.So long as you have plenty of BTUs to cool,you should be very > happy going all rigid.Wasnt cheap but well worth it. good > luck.also...need a vent in the head if you like hot showers. Jay > > On Feb 9, 6:47 am, flitebuilder <[email protected]> wrote: > > > > > Hello all, > > > Another question on my 1973 36' SS. I have removed the salon side > > windows and the small windows in the head and double berth. I would > > like opinions on the side windows in the salon. Should I have the > > glass shop put in rigid non opening panes that will not leak, or > > should I go with the original factory sliding panes to allow for > > ventilation? > > > The windshields are in sad shape, mainly because the tink is coming > > off. I want to just remove the tint and leave the windows alone. > > Main reason is that they look to be a real pain to remove. > > > Also, has anyone had problem with the port holes in the 'V' berth > > leaking. I do not think I am going to remove them right now. > > > Any and all advice is appreciated. > > > Thanks, > > > Victor- Hide quoted text - > > - Show quoted text - --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "UnifliteWorld" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/UnifliteWorld?hl=en -~----------~----~----~----~------~----~------~--~---
