louis churukian wrote:
> With the bike
> running, if I seat a mixture screw it will lean out and slow the motor.
> All except one. I took the screw out (spring and washer also), blew air
> again. Seems clear, yet no difference in adjustment..? Was going to buy
> another set of spark plugs but running out of time. Off to work. Later,
> thanks.
>
No response from a screw typically means either the circuit is restricted (blow
it out with the needle removed) or the carbs are way out of sync. I usually
remove the needles, spray some carb cleaner in and blow it out with copressed
air.
===============================================
Paul Sayegh
V-Max Technical List Administrator
VMOA Northwest Director
V-Max web page http://www.sayegh.org/tips.htm
===============================================
.............................................
To unsubscribe go to http://www.sayegh.org/unsubscribe.htm
.............................................
