Teemu Suikki wrote:
With only one card installed, both cards work fine. ...
This sounds like an interesting solution... Can you post a link to
picture showing this particular setup? :-P scnr
It could be some hardware issue, if there is some conflict with two
cards.. But I have tried both cards in all PCI slots, no difference there.
With both cards installed, load the budget and the budget-ci modules and
then take a look at the dmesg output and see what it says.
Look into /proc/interrupts and see if both cards may be using the same
interrupt.
What happens if you append "acpi=off" and/or "noapic" to the kernel?
Let us know what you found out.
André
PS: Please start a new message when posting to a list and do not reply
to an older message by replacing the subject.
_______________________________________________
vdr mailing list
vdr@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr