Replying to my own post !
On Sunday 01 October 2006 19:35, Gaffer Inscribed Thus:
> Hi Rick,
>
> On Sunday 01 October 2006 19:10, Rick Glazier Inscribed Thus:
> > FWIW: Did you check all BIOS settings for the CPU?
> > Even though you are in jumper free enabled mode, the BIOS
> > will still have significant OVER-RIDE selections for the CPU...
> > Manual, page 54...
> > Did you get the warnings on page 56? (Change CPU section.)
>
> No !
>
> > I got the manual LESS the last 3 letters. I'm hoping that is close
> > enough.. CUSI-M (They did not seem to have exactly what you
> > said...)
> >
> > Rick Glazier
>
> Yes thats the one !
>
> > ----- Original Message -----
> > From: "Rick Glazier"
> >
> > > The RAM seems to have warnings in the MB manual - related to the
> > > CPU also, so it would be "good" to swap them too...
>
> The machine did not complain when I swapped the cpu ! It correctly
> shows an 800 Mhz there. When I put the 1100 back .... Zilch,
> nothing. The machine powers up, but thats all !
I re-tried the 1100 cpu in the good machine ! Because I assumed that it
was running at 1100 I never checked what the bios thought it was.......
It still shows 800 even with the second 1100 cpu.
Based on you pointing out the notes from the manual. I reset the bios
and the good machine did exactly what it should and allowed me to
choose 100/100. After re-boot the bios correctly shows 1100 Mhz for
the cpu.
Still doesn't explain why the second machine won't even post with the
1100 cpu in it !
--
Best Regards:
Derrick.
Pontefract Linux Users Group.
plug at play-net.co.uk
--
----------------------------------------
To unsubscribe, mailto: [EMAIL PROTECTED]
Is your picture included in the Official Win-Home List Members Profiles Page?
http://www.besteffort.com/winhome/Profiles.html
If not, write to: [EMAIL PROTECTED]
