Good Show!!!! Dave On Nov 30, 2008, at 7:03 PM, Jon Elson wrote:
> Please excuse a short commercial plug.... > > Dave Engvall gave me a Panasonic brushless motor at the CNC > Workshop to > see if I could figure out how to run it. > It took me a LONG time to get around to figure it out, but I have > finally got it! It has a serial output that contains the commutation > signals, so I have to add a little decoder for that signal. > Otherwise, > i have gotten it to work with my Universal PWM Controller and > brushless > PWM Servo amp. > It works quite smoothly, better than a number of other brushless > motors > I've tried. > > The motor I have is a Panasonic MUMS042A1A, but I would assume all the > motors in that "Minas S" series would work as well. > > Jon Elson > > ---------------------------------------------------------------------- > --- > This SF.Net email is sponsored by the Moblin Your Move Developer's > challenge > Build the coolest Linux based applications with Moblin SDK & win > great prizes > Grand prize is a trip for two to an Open Source event anywhere in > the world > http://moblin-contest.org/redirect.php?banner_id=100&url=/ > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------- This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
