Re: [expert-it] MandrakeUpdate che non parte
On Friday 15 June 2001 22:40, Ghiro wrote: ecco l'errore: MandrakeUpdate: error while loading shared libraries: libcurl.so.1: cannot load shared object file: No such file or directory avete idea di che cosa posso fare? Direi tu non abbia installato le libcurl, che dovrebbero appunto occuparsi del download. Sulla mia mdk 8 il pacchetto e' libcurl1-7.6.1-2mdk dovresti averle sul cd altrimenti puoi prenderle a www.rpmfind.net bye -- Devil Inside Experiment - C'era un bambino che odiava la polizia www.acidlife.com/~freefred Davide Banda Partial Arts [2000] - http://62.149.147.100/~freefred ICQ uin 5887365 - PGP key available on keyservers
[expert-it] CUPS non funziona
Qualcuno è riuscito a stampare qualcosa di più della pagina di prova durante l'installazione di LM 8.0? Dopo aver installato regolarmente la stampante e tutto il resto, CUPS non vede più alcun settaggio e nessuna stampante. Se quallcuno mi può dire cosa fare... Grazie Saluti a tutti andrea
Re: [expert] installed XFree 4.1 from cooker- now no DRI (mga)
I went throught the following drill last week and was successful. Get http://azz.us-lot.org/kernel-drm-4.1.0.tar.gz and compile using: make linux (or something like that) The resulting .o files replace those in /lib/modules/2.4.5-3mdk/kernel/drivers/char/drm. Note the i810 module does not get created. You might wish to backup the existing drm files. Copy over the new ones and gzip them. For a little extra humpf for the G400, add Option 2 to /etc/X11/XF86Config-4. And it wouldn't hurt to replace DefaultColorDepth with DefaultDepth. Reboot and you should be in business. Bill Brian Hall wrote: I just installed the cooker XFree 4.1 RPMs onto my Mandrake 8.0 system. Went fine, although I had to back out the pam-0.75 install and revert back to pam-0.74 from CD#1 (glibc problem, don't want to update my whole system to cooker). The problem is, I no longer have DRI enabled. I think it is because the DRI versions aren't matching? My G400 was working great with DRI on XF4.0.3, is there a quick way to get it running with XF4.1 or do I have to recompile XF4.1 from source to get a working mga again? I did try to install the binary modules from the Matrox tarball, but they wouldn't install. I'm currently running the 2.4.5-ac14 kernel. -- http://www.bigfoot.com/~brihall Linux Consultant Plasma is another matter. -- From the shores of Khlong YaiPhuan, Bangkok, Thailand...
[expert] X uses LOTS of memory
I am using LM7.2 with an nVidia TNT Riva 32M graphics card. Using top, I noticed that the X process was using about 45% of the memory - 56M out of a total of 128M. Why should X use so much memory? I have since installed the nVidia drivers (which worked first time!), but now see X using 145% of the memory: 191M!. Hence, swap is very much in use. Can anyone tell me what is happening here and what I can do about it? Brian Schroeder _ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
[expert] PPP - throughput dies
Running LM7.2, I use kppp. When connected, I keep the kppp Statistics window up all the time to watch what is happening. I have found that I rarely get a continuous flow of data, except for some times when I may have 6 or so wgets running at the same time. I realise that transient conditions do affect things considerably, but the up-and-down nature of the traffic graph - including periods of no throughput - seems a bit much. I have also noticed that when the local CPU is doing work of any significance, throughput dies. I wouldn't have thought it should have any major effect on PPP traffic. Sometimes, it gets to the point when no high-level protocol will move any data at all unless I reset my modem and re-dial - re-establishing the ppp link. Things like DNS lookups, and ntp work, but HTTP, NNTP, and FTP seize up completely. I have examined everything I can find, including all log files I can find, but cannot find anything to tell me what is happening. Is this normal? Or, what should I be looking for? Brian Schroeder _ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
[expert] Kde apps outside kde
I have been trying to speed my machine up by avoiding using kde, i am quite taken by xfce and a few other environments, however i have a problem. Somehow I must have damaged my kde so that i cannot run most of its components in any evironment but kde. Konqueror and many others fail with the error Can't talk to klauncher I am pretty much baffled and have exhausted my abilities to troubleshoot. I am not an expert ( more of an improver) but this question has boggled the best minds on alt.os.linux.mandrake twice now, so i figured i need some industrial strenght assistance. i have a happily installed and pretty much un-updated LM8.0
[expert] linux networking
Hi all, I`m going to be starting a new job soon and its entry level networking unix systems. So what would you recommend on reading to help me along ? Thank you, chronos. FREE Disinformation E-book - http://www.disinfo.com
[expert] Security: always the world writeable files
A couple questions... I selected medium security when I installed Mandrake 8.0. My root mailbox fills up, seemingly as a result, with security auditing messages about world writeable files being found: Jun 14 04:04:43 localhost : Security Warning: World Writeable files found : Jun 14 04:04:43 localhost : - /etc/.aumixrc Jun 14 04:04:43 localhost : - /etc/X11/lbxproxy Jun 14 04:04:43 localhost : - /etc/X11/proxymngr Jun 14 04:04:43 localhost : - /etc/X11/xserver Jun 14 04:04:43 localhost : - /etc/codepages/codepage.437 Jun 14 04:04:43 localhost : - /etc/codepages/codepage.737 Jun 14 04:04:43 localhost : - /etc/codepages/codepage.850 Jun 14 04:04:43 localhost : - /etc/codepages/codepage.852 Jun 14 04:04:43 localhost : - /etc/codepages/codepage.861 Jun 14 04:04:43 localhost : - /etc/codepages/codepage.866 Jun 14 04:04:43 localhost : - /etc/codepages/codepage.932 Jun 14 04:04:43 localhost : - /etc/codepages/codepage.936 Jun 14 04:04:43 localhost : - /etc/codepages/codepage.949 Jun 14 04:04:43 localhost : - /etc/codepages/codepage.950 Jun 14 04:04:43 localhost : - /etc/codepages/unicode_map.437 Jun 14 04:04:43 localhost : - /etc/codepages/unicode_map.737 Jun 14 04:04:43 localhost : - /etc/codepages/unicode_map.850 Jun 14 04:04:43 localhost : - /etc/codepages/unicode_map.852 Jun 14 04:04:43 localhost : - /etc/codepages/unicode_map.861 Jun 14 04:04:43 localhost : - /etc/codepages/unicode_map.866 Jun 14 04:04:43 localhost : - /etc/codepages/unicode_map.932 Jun 14 04:04:43 localhost : - /etc/codepages/unicode_map.936 And so forth. Many such files in /etc. There are also a number of these in my home directory and in /lib/modules/2.4.3-10mdk (plus a few others). Again, I did not do anything to alter the perms on these files, they are the default that went with Mandrake 8.0 and medium security install. I would like to tighten things up without overly hindering user abilities to do anything useful on the system (high security setting is terribly hindering for anything like playing games, connecting to the internet, etc). I am somewhat fearful of simply changing the perms on these files en masse because I recently tried this on my home directory as well as in the /tmp directory and it totally wrecked my system. It took me days to get things straightened out and working again. What permissions SHOULD I have on files in my $HOME directory and in /etc and /lib/modules to eliminate them from loading up my root mailbox? They must be perms that don't kill usefulness of the system by users and I don't want to wreck my system as I did before. Any suggestions?
[expert] cross-compiling for cisco cbos?
Does anyone know if it is possible to cross-compile linux/unix apps for cisco routers? I have a cisco 675 DSL router and would like to try to compile a couple apps to be runnable on the router but have no idea as to how to go about this. praedor
Re: [expert] installed XFree 4.1 from cooker- now no DRI (mga)
I went throught the following drill last week and was successful. Get http://azz.us-lot.org/kernel-drm-4.1.0.tar.gz and compile using: make linux (or something like that) Actually, 'xmkmf ; make -f Makefile.linux'. The resulting .o files replace those in /lib/modules/2.4.5-3mdk/kernel/drivers/char/drm. Note the i810 module does not get created. You might wish to backup the I saw some mga files as well. Do these replace the mga directory in XF 4.1? Do you still need to get (or copy) the matrox driver from the Matrox web site? I did this for X 4.0.3, in addition to building it from source. I use a monolithic 2.4.x kernel and am wondering what to do with this kernel-drm-4.1.0 file. I built it, but should I just copy files into my linux source tree and rebuild? Bill David E. Fox Thanks for letting me [EMAIL PROTECTED]change magnetic patterns [EMAIL PROTECTED] on your hard disk. ---
[expert] lm-sensors install/use problems
Hi *, I've been fiddling with lm-sensors 2.5.5 recently to try to get it to work. I'm using Mandrake 7.2. I was using version 2.4.2 which does have better support for sensors devices, and patched up to 2.4.5 (but that didn't work - I got a 'ran out of input data, system halted' message, so back to the Mandrake kernel 2.2.17-mdk). I've rebuilt lm-sensors and installed it, but at present it can't access the proc file - permissions don't seem to matter, as I've run the sensors binary as root. I've put in the suggested lines in rc.local and in /etc/modules.conf that the sensors-detect program suggested. When I run 'sensors' I get one line output, can't read /proc file. I've an ASUS A7V133 mainboard, and the sensors-detect program suggested I use a via686a module, yet when I modprobe it, it says it can't be found. I then look in /lib/modules/2.2.17-mdk/misc, sure enough it isn't there. I peek in the chips directory, there is a via686a module but I can't bring the module in, I get a lot of unresolved symbols. I've made sure to run 'depmod -a'. Any suggestions? I was hoping to upgrade to kernel 2.4.5, but in looking into the kernel config file I don't see anything that exactly matches the probe that my mainboard uses. David E. Fox Thanks for letting me [EMAIL PROTECTED]change magnetic patterns [EMAIL PROTECTED] on your hard disk. ---
Re: [expert] cross-compiling for cisco cbos?
Praedor S. Tempus wrote: Does anyone know if it is possible to cross-compile linux/unix apps for cisco routers? I have a cisco 675 DSL router and would like to try to compile a couple apps to be runnable on the router but have no idea as to how to go about this. praedor Without internal IOS info (Cisco proprietary), there's not much chance... even within Cisco, only the development folk and some support personnel can even compile the code. Before I retired, there were discussions about user apps; but I don't think that's available yet... then again, I could be wrong... Pierre
[expert] cdrecord always fail
i've a lot of problems with LM8 and cdrecord. Some weeks ago i bought a ATAPI Acer cdrw, and tried to record some cd's. Cdrecord always produced errors, so i thought the recorder was broken and i took back. I changed the cdrw with another acer. Tried this, same problem. Brought back, took another, same problem. After this, i brought back the last acer and took an yamaha 2100 SCSI. tried it. same problem. This time i'm quite sure it's not an hardware problem. I tried the cdrecord shipped with mandrake, and the cdrecord 1.11a03 (the last from the schilling site). I also recompiled the last 2.4.5 kernel. same problem. i also tried to change the media, and i tried 2 or 3 different media. No results. I started searching on deja. A lot of people have my problem, but no one get a valid and useful (for them and for me) reply. this is the report (with 1.9, the report with 1.11a03 is identical). Sometimes instead of fatal error i get a retryable error, but the writing fails in the same manner. [root@quela bin]# ./cdrecord -v speed=8 dev=/dev/sgb /mnt/iso.iso Cdrecord 1.9 (i686-pc-linux-gnu) Copyright (C) 1995-2000 Jörg Schilling TOC Type: 1 = CD-ROM scsidev: '/dev/sgb' devname: '/dev/sgb' scsibus: -2 target: -2 lun: -2 Linux sg driver version: 3.1.17 Using libscg version 'schily-0.1' atapi: 0 Device type: Removable CD-ROM Version: 2 Response Format: 2 Capabilities : SYNC Vendor_info: 'YAMAHA ' Identifikation : 'CRW2100S' Revision : '1.0H' Device seems to be: Generic mmc CD-RW. Using generic SCSI-3/mmc CD-R driver (mmc_cdr). Driver flags : SWABAUDIO Drive buf size : 7582848 = 7405 KB FIFO size : 4194304 = 4096 KB Track 01: data 629 MB Total size: 723 MB (71:38.58) = 322394 sectors Lout start: 723 MB (71:40/44) = 322394 sectors Current Secsize: 2048 ATIP info from disk: Indicated writing power: 4 Is not unrestricted Is not erasable Disk sub type: Medium Type A, high Beta category (A+) (3) ATIP start of lead in: -11079 (97:34/21) ATIP start of lead out: 359849 (79:59/74) Disk type:Long strategy type (Cyanine, AZO or similar) Manuf. index: 11 Manufacturer: Mitsubishi Chemical Corporation Blocks total: 359849 Blocks current: 359849 Blocks remaining: 37455 Starting to write CD/DVD at speed 8 in write mode for single session. Last chance to quit, starting real write in 1 seconds. Waiting for reader process to fill input buffer ... input buffer ready. Performing OPC... Starting new track at sector: 0 Track 01: 6 of 629 MB written (fifo 85%)../cdrecord: Input/output error. write_g1: scsi sendcmd: fatal error CDB: 2A 00 00 00 0C 5A 00 00 1F 00 write track data: error after 6475776 bytes Sense Bytes: 70 00 00 00 00 00 00 0A 00 00 00 00 00 00 00 00 00 00 Writing time: 21.307s Fixating... Fixating time: 31.199s ./cdrecord: fifo had 166 puts and 103 gets. ./cdrecord: fifo was 0 times empty and 20 times full, min fill was 84%. many thanks for the help. After this, i'll start downloading nero and seek for a windoze installation ;_; -- Zuglio c'e' qualche requisito minimo x linux? munehiro l'intelligenza
Re: [expert] cdrecord always fail
On Sun, Jun 17, 2001 at 01:47:34AM -0400, civileme wrote: Something clicked--can you also send the output of lspcidrake? [root@quela munehiro]# lspcidrake agpgart : Intel Corporation|440BX/ZX - 82443BX/ZX Host bridge unknown : Intel Corporation|440BX/ZX - 82443BX/ZX AGP bridge unknown : Intel Corporation|82371AB PIIX4 ISA unknown : Intel Corporation|82371AB PIIX4 IDE usb-uhci: Intel Corporation|82371AB PIIX4 USB unknown : Intel Corporation|82371AB PIIX4 ACPI - Bus Master IDE Controller aic7xxx : Adaptec|AHA-2940U2/W / 7890 ne2k-pci: Realtek|RTL-8029(AS) Card:NVIDIA GeForce2 DDR (generic): nVidia Corporation|NV11 here it is. the mobo is a Asus P2BS, with onboard AHA2940 controller. The actual cdrw is correctly terminated, and the scsi id is unique. -- ma i floppy da 1e7 tengono dieci milioni di byte?
[expert] Installing kisocd
Has anyone had any luck installing a kisocd rpm on Mandrake 8.0 and, if so, where did you get it. I tried to use kisocd-0.6.4-4.i386.rpm from rpmfind to no avail. I keep getting: error: failed dependencies: kdelibs = 2 is needed by kisocd-0.6.4-4 qt1x = 1.44 is needed by kisocd-0.6.4-4 libkdecore.so.2 is needed by kisocd-0.6.4-4 libkdeui.so.2 is needed by kisocd-0.6.4-4 libkfile.so.2 is needed by kisocd-0.6.4-4 libkfm.so.2 is needed by kisocd-0.6.4-4 libqt.so.1 is needed by kisocd-0.6.4-4 Where can I find a rpm of kisocd compatible with 8.0?
[expert] iptables and kernel 2.4.5
Hey... Forgive me if this has been asked before... Are there known issues with the 2.4.5 rpm and internet connection sharing I tried it today and had a heck of a time getting it to *not* work... It wouldn't work after just updating from the 2.4.3 kernel and I didn't know why until I ran DrakConf from a terminal window instead of the icon... I was getting an error message from iptables saying that I had an invalid kernel version and need to to probably update iptables Well, I had the latest mdk rpm release of iptables (v.1.2.2) Any sugguestions? Thanks, --Davy
Re: [expert] Installing kisocd
On Saturday 16 June 2001 09:42 pm, Ken Archer wrote: Has anyone had any luck installing a kisocd rpm on Mandrake 8.0 I believe you'll need to try 'kisocdII', and no, the tarball compile failed as did various rpms. tske a look at 'koncd' ( http://www.koncd.de/ ) -- Tom Brinkman [EMAIL PROTECTED] Galveston Bay
Re: [expert] lm-sensors install/use problems
On Saturday 16 June 2001 03:18 pm, David E. Fox wrote: I've rebuilt lm-sensors and installed it, Any suggestions? I was hoping to upgrade to kernel 2.4.5, but in looking into the kernel config file I don't see anything that exactly matches the probe that my mainboard uses. Mandrake 2.2.x kernels have had i2c support patched in even before the 2.4.x kernels. You might need to undo your efforts and just install the appropriate lm_utils ...-mdk rpm. With 8.0 I'm using lm_utils-2.4.3_2.5.5-25mdk Run 'sensors-detect' and it'll give you the lines you'll need to add to rc.local and modules.conf. I suspect if that doesn't work for you, it's a hardware problem. Still, AMD isn't going to fully support temperature monitoring till the Athlon 4's come out. -- Tom Brinkman [EMAIL PROTECTED] Galveston Bay
[expert] How do I set up a joystick?
I am running Mandrake 8, with fvwm2 as a window manager and no Gnome or KDE. I'm trying to compile/run xmame and need joystick support, but can't figure out how to get it. harddrake shows a line for joysticks, but if I click on it nothing happens. probing options lists no configuration tool for joysticks. rpmdrake lists no packages that contain the string joy. xf86cfg doesn't seem to anything useful that I can figure out (like put a joystick section in my XF86Config-4). I can try modprobe analog or turn on my Sidewinder and try modprobe sidewinder. This doesn't give an error message, but doesn't do anything useful that I can see, either. What can I do to get a working joystick?
Re: [expert] installed XFree 4.1 from cooker- now no DRI (mga)
David E. Fox wrote: I went throught the following drill last week and was successful. Get http://azz.us-lot.org/kernel-drm-4.1.0.tar.gz and compile using: make linux (or something like that) Actually, 'xmkmf ; make -f Makefile.linux'. 'make -f Makefile.linux' alone also works. The resulting .o files replace those in /lib/modules/2.4.5-3mdk/kernel/drivers/char/drm. Note the i810 module does not get created. You might wish to backup the I saw some mga files as well. Do these replace the mga directory in XF 4.1? Do you still need to get (or copy) the matrox driver from the Matrox web site? I did this for X 4.0.3, in addition to building it from source. I don't know, I copied only the *.0 as described above. But I'll try the other mga files and see what happens. I believe the the matrox driver from the matrox web site is required if you want to use the recently released 'mgadesk' utility. I use a monolithic 2.4.x kernel and am wondering what to do with this kernel-drm-4.1.0 file. I built it, but should I just copy files into my linux source tree and rebuild? No need to rebuild anything. Yesterday, I upgraded to kernel 2.4.5-5mdk and the drm files didn't need replacing. Bill David E. Fox Thanks for letting me [EMAIL PROTECTED]change magnetic patterns [EMAIL PROTECTED] on your hard disk. --- Bill -- From the shores of Khlong YaiPhuan, Bangkok, Thailand...
Re: [expert] lm-sensors install/use problems
Mandrake 2.2.x kernels have had i2c support patched in even before the 2.4.x kernels. You might need to undo your efforts and just install the appropriate lm_utils ...-mdk rpm. With 8.0 I'm using I saw some of the necessary modules in lib/modules/2.2.17/misc but the one I need apparently for this mainboard is via686a.o, which isn't in that directory. Consequently, 'modprobe via686a.o' doesn't work. I did as you suggested: I instaled the lm_utils rpm and there is little difference. The one main difference is if I load the sensors.o modules I get a different line of output from sensors: 'no sensors found' rather than 'cannot read /proc file'. This seems significant. From 'modules-dep' it would seem that sensors.o is dependent on via686a.o - but where is the via686a.o file? that doesn't work for you, it's a hardware problem. Still, AMD isn't going to fully support temperature monitoring till the Athlon 4's come Isn't that more of a mainboard issue than a CPU one? Tom Brinkman [EMAIL PROTECTED] Galveston Bay David E. Fox Thanks for letting me [EMAIL PROTECTED]change magnetic patterns [EMAIL PROTECTED] on your hard disk. ---
[expert] One of these packages will kill RPM
Hi Guys, I've finally Identified which packages kill rpm in all forms. (cause the funny segfaults) I's either: Apache-ASP-2.00-4 glibc-2.2.3-2mdk -devel-2.2.3-2mdk libintl1-0.10.38-1mdk all three linuxconf-1.25r7-1mdk packages. So these are the culprits which are killing rpm drake and rpm itself. Just an FYI
Re: [expert] mounting a tape!
On Fri, Jun 15, 2001 at 06:02:32PM +0300, Turgut Kalfaoglu wrote: Did anyone succeed in NFS sharing a tape and mounting that share from another machine? I'm trying to make a backup from a machine that doesnt have a tape drive to another, that does. I have the tape in EXPORTS, but I get not a directory blurb when I try to mount it; it seems I need to first mount that tape locally on the machine that has the tape; but it refuses to be mounted as well :) any ideas how? Thanks, -turgut Tape ? You mean something like DAT ou DLT ?! You can't use such a device like a hard disk or a floppy/cdrom. I've never seen someone that has managed to mount a tape as a filesystem. I doesn't work like Windows software like Direct-CD or equivalent one for tape... You use tar/cpio/dump to backup/ restore you filesytem to/from the tape. If you want to backup different machines with only one tape, export what you need to backup on each machine, and mount every exported filesystems/directories on the server... Or use the machine with the tape as a backup server: it will export some directories. On each machine, mount one from the backup server, copy the data you need to backup to the backup server exported filesystem. Finally, run a backup on the backup server. Laurent. -- Laurent CREPET -- [EMAIL PROTECTED] http://megrapet.free.fr/
Re: [expert] GRUB
So sprach Jason am Fri, Jun 15, 2001 at 03:57:01PM -0700: Thanks! But how do I get Linux to boot once I delete the MBR??? (on the other machine i have) On the Windows machine, where you did fdisk /mbr? You might try loadlin, or you might go the easy way, and use a boot loader like GRUB or maybe even LILO. or Linux? OR, how would I ADD GRUB to a drive whose MBR was trashed, or whose GRUB didn't exist in the first place? And can I access GRUB While installing Mandrake, you can chose to install GRUB. Or you might boot your system with the mandrake cd and do a rescue from there. configuration from DOS? Not that I know. Alexander Skwar -- How to quote: http://learn.to/quote (german) http://quote.6x.to (english) Homepage: http://www.digitalprojects.com | http://www.iso-top.de iso-top.de - Die günstige Art an Linux Distributionen zu kommen Uptime: 20 hours 35 minutes
Re: [expert] X uses LOTS of memory
So sprach Brian Schroeder am Sat, Jun 16, 2001 at 04:36:54PM +0930: I have since installed the nVidia drivers (which worked first time!), but now see X using 145% of the memory: 191M!. Hence, swap is very much in use. Is swap really in use? Here at home (same config as yours), it's not. It's rather that top reports the memory wrong, as it also counts the 32+ MB on your nVidia card that X uses and thus doesn't count correctly. IOW: Nothing to worry about. Alexander Skwar -- How to quote: http://learn.to/quote (german) http://quote.6x.to (english) Homepage: http://www.digitalprojects.com | http://www.iso-top.de iso-top.de - Die günstige Art an Linux Distributionen zu kommen Uptime: 20 hours 38 minutes
Re: [expert] 3 Hard-drive problems
On Saturday 16 June 2001 07:23, Jesper Holmberg wrote: Below follow three problems I've had since I installed Mdk8. Sorry to post them all in the same message, but I don't know whether or not they are related. What I did during the installation was to change (all partitions but one) to ReiserFS. But I did no repartitioning, just changed the FS from Ext2. 1. The harddrive is very slow, compared to before. A rough estimate is 3-5 times slower when reading from disk. This is also true on fairly small files, which I expected to benefit from using ReiserFS. 2. Using hdparm on the drive has no perceptible change whatsoever. I have fiddled with all the ususal settings to improve my disappointing performance, but with no effect. Doesn't hdparm work with Reiserfs? 3. The size of one of the partitions is incorrectly estimated by df. df says this: used: /dev/hda6 126M 80M 46M 64% /home but du -sh /home says this: 52M /home There seems to be about 30M missing, and this has been th case since installing. Could someone help me shed some light on these issues? TIA Jesper p.s. Here follows my /etc/fstab, if useful: /dev/hda8 / reiserfs defaults 1 1 /dev/hda5 /boot ext2 noatime 1 2 none /dev/pts devpts mode=0620 0 0 /dev/hda6 /home reiserfs defaults 1 2 /mnt/cdrom /mnt/cdrom supermount fs=iso9660,dev=/dev/cdrom 0 0 /mnt/floppy /mnt/floppy supermount fs=vfat,dev=/dev/fd0 0 0 /dev/hda1 /mnt/windows vfat user,exec,umask=0,codepage=850,iocharset=iso8859-1 0 0 none /proc proc defaults 0 0 /dev/hda7 swap swap defaults 0 0 Well, this is what I've done: Installed MD 7.2 with Reiser (with my motherboaard, Soltek SL-75DRV, the MD 8.0 with ext2 the XWindows simply don't start after install). With 7.2 everything works really fine. Upgrate to 8.0 and use old kernel. Here you have MD 8.0, Reiser, and UDMA. (cdrecord do not work with old kernels) Fedneg
Re: [expert] cdrecord always fail
On Saturday 16 June 2001 19:24, munehiro wrote: i've a lot of problems with LM8 and cdrecord. Some weeks ago i bought a ATAPI Acer cdrw, and tried to record some cd's. Cdrecord always produced errors, so i thought the recorder was broken and i took back. I changed the cdrw with another acer. Tried this, same problem. Brought back, took another, same problem. After this, i brought back the last acer and took an yamaha 2100 SCSI. tried it. same problem. This time i'm quite sure it's not an hardware problem. I tried the cdrecord shipped with mandrake, and the cdrecord 1.11a03 (the last from the schilling site). I also recompiled the last 2.4.5 kernel. same problem. i also tried to change the media, and i tried 2 or 3 different media. No results. I started searching on deja. A lot of people have my problem, but no one get a valid and useful (for them and for me) reply. this is the report (with 1.9, the report with 1.11a03 is identical). Sometimes instead of fatal error i get a retryable error, but the writing fails in the same manner. [root@quela bin]# ./cdrecord -v speed=8 dev=/dev/sgb /mnt/iso.iso Cdrecord 1.9 (i686-pc-linux-gnu) Copyright (C) 1995-2000 Jörg Schilling TOC Type: 1 = CD-ROM scsidev: '/dev/sgb' devname: '/dev/sgb' scsibus: -2 target: -2 lun: -2 Linux sg driver version: 3.1.17 Using libscg version 'schily-0.1' atapi: 0 Device type: Removable CD-ROM Version: 2 Response Format: 2 Capabilities : SYNC Vendor_info: 'YAMAHA ' Identifikation : 'CRW2100S' Revision : '1.0H' Device seems to be: Generic mmc CD-RW. Using generic SCSI-3/mmc CD-R driver (mmc_cdr). Driver flags : SWABAUDIO Drive buf size : 7582848 = 7405 KB FIFO size : 4194304 = 4096 KB Track 01: data 629 MB Total size: 723 MB (71:38.58) = 322394 sectors Lout start: 723 MB (71:40/44) = 322394 sectors Current Secsize: 2048 ATIP info from disk: Indicated writing power: 4 Is not unrestricted Is not erasable Disk sub type: Medium Type A, high Beta category (A+) (3) ATIP start of lead in: -11079 (97:34/21) ATIP start of lead out: 359849 (79:59/74) Disk type:Long strategy type (Cyanine, AZO or similar) Manuf. index: 11 Manufacturer: Mitsubishi Chemical Corporation Blocks total: 359849 Blocks current: 359849 Blocks remaining: 37455 Starting to write CD/DVD at speed 8 in write mode for single session. Last chance to quit, starting real write in 1 seconds. Waiting for reader process to fill input buffer ... input buffer ready. Performing OPC... Starting new track at sector: 0 Track 01: 6 of 629 MB written (fifo 85%)../cdrecord: Input/output error. write_g1: scsi sendcmd: fatal error CDB: 2A 00 00 00 0C 5A 00 00 1F 00 write track data: error after 6475776 bytes Sense Bytes: 70 00 00 00 00 00 00 0A 00 00 00 00 00 00 00 00 00 00 Writing time: 21.307s Fixating... Fixating time: 31.199s ./cdrecord: fifo had 166 puts and 103 gets. ./cdrecord: fifo was 0 times empty and 20 times full, min fill was 84%. many thanks for the help. After this, i'll start downloading nero and seek for a windoze installation ;_; Looks like a streaming problem. Is the IDE channel on DMA? hdparm /dev/hdc(or whatever place your device is plugged in) Should tell you. If you are not getting DMA, you cannot write a CD, most times. Civileme
Re: [expert] cdrecord always fail
On Saturday 16 June 2001 19:24, munehiro wrote: i've a lot of problems with LM8 and cdrecord. Some weeks ago i bought a ATAPI Acer cdrw, and tried to record some cd's. Cdrecord always produced errors, so i thought the recorder was broken and i took back. I changed the cdrw with another acer. Tried this, same problem. Brought back, took another, same problem. After this, i brought back the last acer and took an yamaha 2100 SCSI. tried it. same problem. This time i'm quite sure it's not an hardware problem. I tried the cdrecord shipped with mandrake, and the cdrecord 1.11a03 (the last from the schilling site). I also recompiled the last 2.4.5 kernel. same problem. i also tried to change the media, and i tried 2 or 3 different media. No results. I started searching on deja. A lot of people have my problem, but no one get a valid and useful (for them and for me) reply. this is the report (with 1.9, the report with 1.11a03 is identical). Sometimes instead of fatal error i get a retryable error, but the writing fails in the same manner. [root@quela bin]# ./cdrecord -v speed=8 dev=/dev/sgb /mnt/iso.iso Cdrecord 1.9 (i686-pc-linux-gnu) Copyright (C) 1995-2000 Jörg Schilling TOC Type: 1 = CD-ROM scsidev: '/dev/sgb' devname: '/dev/sgb' scsibus: -2 target: -2 lun: -2 Linux sg driver version: 3.1.17 Using libscg version 'schily-0.1' atapi: 0 Device type: Removable CD-ROM Version: 2 Response Format: 2 Capabilities : SYNC Vendor_info: 'YAMAHA ' Identifikation : 'CRW2100S' Revision : '1.0H' Device seems to be: Generic mmc CD-RW. Using generic SCSI-3/mmc CD-R driver (mmc_cdr). Driver flags : SWABAUDIO Drive buf size : 7582848 = 7405 KB FIFO size : 4194304 = 4096 KB Track 01: data 629 MB Total size: 723 MB (71:38.58) = 322394 sectors Lout start: 723 MB (71:40/44) = 322394 sectors Current Secsize: 2048 ATIP info from disk: Indicated writing power: 4 Is not unrestricted Is not erasable Disk sub type: Medium Type A, high Beta category (A+) (3) ATIP start of lead in: -11079 (97:34/21) ATIP start of lead out: 359849 (79:59/74) Disk type:Long strategy type (Cyanine, AZO or similar) Manuf. index: 11 Manufacturer: Mitsubishi Chemical Corporation Blocks total: 359849 Blocks current: 359849 Blocks remaining: 37455 Starting to write CD/DVD at speed 8 in write mode for single session. Last chance to quit, starting real write in 1 seconds. Waiting for reader process to fill input buffer ... input buffer ready. Performing OPC... Starting new track at sector: 0 Track 01: 6 of 629 MB written (fifo 85%)../cdrecord: Input/output error. write_g1: scsi sendcmd: fatal error CDB: 2A 00 00 00 0C 5A 00 00 1F 00 write track data: error after 6475776 bytes Sense Bytes: 70 00 00 00 00 00 00 0A 00 00 00 00 00 00 00 00 00 00 Writing time: 21.307s Fixating... Fixating time: 31.199s ./cdrecord: fifo had 166 puts and 103 gets. ./cdrecord: fifo was 0 times empty and 20 times full, min fill was 84%. many thanks for the help. After this, i'll start downloading nero and seek for a windoze installation ;_; Something clicked--can you also send the output of lspcidrake? Civileme
[expert] Wrong email address for self
Dear friends: For whatever it's worth: A member of the KDE list has just pointed out to me that the return address in Kmail, my default email program, for the past several weeks has been wrong. I did a fresh install of LM 8.0 about three weeks ago and during the process I had inadvertently entered [EMAIL PROTECTED] instead of [EMAIL PROTECTED] Thank you for your understanding. Benjamin -- Sher's Russian Web http://www.websher.net Benjamin and Anna Sher [EMAIL PROTECTED]
Re: [expert] cdrecord always fail
munehiro wrote: On Sun, Jun 17, 2001 at 01:47:34AM -0400, civileme wrote: Something clicked--can you also send the output of lspcidrake? [root@quela munehiro]# lspcidrake agpgart : Intel Corporation|440BX/ZX - 82443BX/ZX Host bridge unknown : Intel Corporation|440BX/ZX - 82443BX/ZX AGP bridge unknown : Intel Corporation|82371AB PIIX4 ISA unknown : Intel Corporation|82371AB PIIX4 IDE usb-uhci: Intel Corporation|82371AB PIIX4 USB unknown : Intel Corporation|82371AB PIIX4 ACPI - Bus Master IDE Controller aic7xxx : Adaptec|AHA-2940U2/W / 7890 ne2k-pci: Realtek|RTL-8029(AS) Card:NVIDIA GeForce2 DDR (generic): nVidia Corporation|NV11 here it is. the mobo is a Asus P2BS, with onboard AHA2940 controller. The actual cdrw is correctly terminated, and the scsi id is unique. -- ma i floppy da 1e7 tengono dieci milioni di byte? munehiro: I see that you have an nVida GeForce video. My question, are you running your X-Windows system at a DefaultDepth 16 and DRI? The reason for my question: I have a Maxtor G400 and when my Xf86Config-4 Section Screen was set for a DefaultDepth 16, which enabled the DRI my system would fault with the same errors as you are having. The ONLY way I could correct this was to change the DefaultDepth to 24 which disabled DRI for my card and system. After doing this my system now burns cd just fine. Don't know if this is you problem, but worth a try. Larry -- Sword'sEdge VoiceMail/Fax: (858) 860-6406 x1587