Thanks Gian. It might be of interest to people in Europe who homebrew as
well as buy rigs that contrary to popular wisdom and based on 'on air' use,
the high IMDDR3 at 1 kHz spacing of Martein's front end and roofing filter
is worth having when working SSB DX zero beat with or among the 40m BC
I would like to consider this front end and the K3 as tunable IF, does that
sound do-able?
David
G3UNA
Thanks Gian. It might be of interest to people in Europe who homebrew as
well as buy rigs that contrary to popular wisdom and based on 'on air' use,
the high IMDDR3 at 1 kHz spacing of
We're all very familiar with the lovely Lisagram or the heart-warming
Katiegram. I've received a Madelyngram.
It simply states my K3 has shipped. Whoo Hooo!
I hope it takes it's time and doesn't arrive until after Tuesday. I'm
teaching a photography class on Wednesdays and have been using
...
I hope it takes it's time and doesn't arrive until after Tuesday. I'm
teaching a photography class on Wednesdays and have been using Monday
and Tuesday nights to prepare for the class. I DON'T need a nice new K3
arriving at that time and tempting me to go play radio when I'm
I said:
I hope it takes it's time and doesn't arrive until after Tuesday.
I'm teaching a photography class on Wednesdays and have been using
Monday and Tuesday nights to prepare for the class. I DON'T need a
nice new K3 arriving at that time and tempting me to go play radio
when
Message: 17
Date: Sun, 13 Apr 2008 14:19:34 -0500
From: Cory Golob [EMAIL PROTECTED]
Subject: [Elecraft] K1
To: elecraft@mailman.qth.net
I acquired a K1 last week. The rig drifts terribly. I had it set to 7050.5
and answered a CQ, by the time I sent DE N1URA K the rig was already on
David,
May I get back to you later this evening off-list with some thoughts about
this approach. An advantage gained by using a variable IF is that the
close-in phase noise of the first mixer's fixed frequency LO injection can
be very low indeed, but there are other disadvantages.
The gain
My K3 kit came just as I was leaving the house to go to my daughters
wedding rehearsal. I opened the white box and grabbed the manuals.
I read while my xyl drove, an unusual circumstance. This was on a
Thursday. I was on the air by Saturday morning, the wedding day. Kit
went together
Hello Class,
This weeks photography assignment is to take a photograph of an unuaual
view availaboe to the general public.
Class dismissed!
And so, ON TO THE K3!!
--
Dave G. KK7SS
'65 MK III Sprite in Richland, WA
Two things are infinite, the universe and human stupidity.
But I'm not so
I can't seem to make the SCAN function work on 6 meters. All other
bands work fine.
Operator error? Or?
Ron
N5QQ
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change,
Ron Chambers wrote:
I can't seem to make the SCAN function work on 6 meters. All other
bands work fine.
Operator error? Or?
No, scanning is deliberately disabled on 6 meters. There is an issue
with FCC approval. As I understand it (someone will correct me if I'm
wrong), a manufacturer of
My K3 arrived while our house was being re-carpeted and re-painted. I had
to wait a week before I could start on it! I almost went nuts. I think I
had the manual memorized by the time I started it though.
Phil - AD5X
I hope it takes it's time and doesn't arrive until after Tuesday. I'm
Sounds like me but I have just ordered mine. I have read most of everything
I could download (two full loose-leaf notebooks), still have a bit to go.
But I have LONG time to wait (ordered 3/30). I had a K2, REALLY impressed
by the receive but the radio just didn't work out (I'll leave it at
Hi Tom,
The Buddipole is a great product with Elecraft-like support. I have both the
Buddipole and the KX-1 and as a portable system, it works fine.
Since you are going to be a newly minted ham, I would not recommend a
Buddipole right now. I would take the suggestion of the others and build a
It's a shame they don't make note of this anywhere.
73,
Steve NN4X
On Mon, Apr 14, 2008 at 11:43 AM, Vic K2VCO [EMAIL PROTECTED] wrote:
Ron Chambers wrote:
I can't seem to make the SCAN function work on 6 meters. All other
bands work fine.
Operator error? Or?
No, scanning is
Greetings fellow Elecrafters and Elecrafters-to-be!
I will take another turn at the mic this evening on 40m. Windy KM5Q will be
away this week.
The frequency: 7.190 +/- The time: 6:00 PM PDT, 9:00 PM EDT.
Hope to hear you on the frequency!
73, Roger WA7BOC
K3/100 #75
They did, on pg. 37 of the manual.
Bob NW8L
On Mon, Apr 14, 2008 at 10:53 AM, S Sacco [EMAIL PROTECTED] wrote:
It's a shame they don't make note of this anywhere.
73,
Steve NN4X
On Mon, Apr 14, 2008 at 11:43 AM, Vic K2VCO [EMAIL PROTECTED] wrote:
Ron Chambers wrote:
I can't
Bob -
I'm looking at page 37 of my Revision C1 Owners Manual.
I see no reference to scanning being disabled on the 50MHz band.
?
73,
Steve NN4X
On Mon, Apr 14, 2008 at 12:58 PM, Bob Cunnings [EMAIL PROTECTED] wrote:
They did, on pg. 37 of the manual.
Bob NW8L
On Mon, Apr 14, 2008
I see the following in the first para under Scanning in rev C1:
...(Some bands may be excluded from scanning for
regulatory reasons.)
Yes, I'll grant that it doesn't mention 50 MHz specifically.
Bob NW8L
On Mon, Apr 14, 2008 at 11:08 AM, S Sacco [EMAIL PROTECTED] wrote:
Bob -
I'm looking
Thanks for the clarifications guys!
Ron
N5QQ
On 4/14/08, S Sacco [EMAIL PROTECTED] wrote:
It's a shame they don't make note of this anywhere.
73,
Steve NN4X
On Mon, Apr 14, 2008 at 11:43 AM, Vic K2VCO [EMAIL PROTECTED] wrote:
Ron Chambers wrote:
I can't seem to make the SCAN
THere is no such limitation in the UK afaik
--
Any sufficiently advanced technology is indistinguishable from magic.
-Arthur C Clarke, science fiction writer (1917-2008)
On 14 Apr 2008, at 16:43, Vic K2VCO wrote:
Ron Chambers wrote:
I can't seem to make the SCAN function work on 6 meters.
I am getting finances in order for my eagerly expected Katiegram (ordered
late Nov) and need to sell my K1. It is a 4 band (40/30/20/17) model with
an extra two band board (80/15). It has: antenna tuner, noise blanker,
backlight, internal battery adaptor, and stand. It also comes with a
Hi all,
There has been a lot of posts lately of an apparent problem with the TX mic
gain being low initially or after a recorded message finishes. I have never
noticed this, but I have the exact opposite problem. Occasionally when
ending an SSB transmission, the RX initially has reduced gain and
On Mon, 14 Apr 2008 11:53:13 -0700 (PDT), you wrote:
Hi all,
There has been a lot of posts lately of an apparent problem with the TX mic
gain being low initially or after a recorded message finishes. I have never
noticed this, but I have the exact opposite problem. Occasionally when
ending an
Don Wilhelm wrote:
Lennart,
If you have transmit power problems in CW mode or TUNE, then the only
part of the SSB opyion board that could cause that condition is Q1, Q2,
Q3 and the associated components.
Look at the KSB2 board schematic near the bottom and you will see which
Lennart,
I am glad to hear you found the problem source.
Things like that happen to all of us at one time or another. Mark it up
to experience and go on with other things more important.
73,
Don W3FPR
Lennart wrote:
So I check on the schematic and there is a lot of RP3 there... When I
Kevin Rock wrote:
Good Evening, Twenty meters was not conducive to radiotelegraphy
today. Total of three check ins.
Indeed it wasn't, and when I figured that out [and that Tom hadn't
checked in] I turned the KW on just to be ready to get a QNB if I heard
anyone. The only station I heard
No, I am not using a seperate RX antenna. I don't even have the KXV3 module.
Knut - AB2TC
Tom Childers, N5GE wrote:
Knut - ASB2TC
Are you using a separate RX antenna?
Tom, N5GE - SWOT 3537 - Grid EM12jq
They that can give up essential liberty
to obtain a little temporary safety
My K3/100 kit s/n 638 arrived in NE Ohio this afternoon ( April14).
It came with the KXV3 and both 200 Hz and 500 Hz roofing filters.
The 1.8 kHz roofing filter and KRX3 were backordered.
I ordered the radio on September 14, 2007. My notice of shipping
in 2-3 weeks arrived on March 18
Hi All:
ordered 09/10/2007
Katiegram 03/14/2008
Received 04/14/2008
backorder 1.8 filter
sn 681
73's Talk to you all on the air.
Bob
KK6UE
Be a better friend, newshound, and
know-it-all with
Yet another data point.
K3/10 kit ordered Oct 1, 2007
''Katiegram March 27
Shipped April 9 (USPS International Priority)
Arrived in Canada: April 14, 2008
with roofing filters and microphone
-Michael, VE3TIX
___
Elecraft mailing list
Post to:
Sorry to have been away for so long. I've been busy.
My students (5th-8th grade) and I have finished the K2, finished the
KNB2, almost finished the KSB2 (I hope we will have that done today),
and haven't started on the KPA100 yet. K2 works great. Lovely receiver!
But, it appears that the
What is the level output of the I F output on the K3? I'm trying to use the
Kenwood SM-220 panadaptor with mine but can't get enough output from the I F of
the K3. I've got on loan an I F amp @ 8.215 mhz set at 15 db gain from Jack of
Clifton Laboratories to try and cure the problem but
Congratulations Pete. Have fun.
Stan
W5EWA
Houston, TX
--
From: Pete Michaelis - N8TR [EMAIL PROTECTED]
Sent: Monday, April 14, 2008 5:25 PM
To: Elecraft@mailman.qth.net
Subject: [Elecraft] K3 s/n 638 Arrival
My K3/100 kit s/n 638 arrived
Congratulations Bob. Mine should be here Thursday (17th).
Stan
W5EWA
Houston, TX
--
From: Robert Paull [EMAIL PROTECTED]
Sent: Monday, April 14, 2008 6:19 PM
To: elecraft@mailman.qth.net
Subject: [Elecraft] K3 received
Hi All:
ordered
Congratulations Michael. Hope to catch you all on the air with my K3
sometime after the 17th.
Stan
W5EWA
Houston, TX
--
From: michael taylor [EMAIL PROTECTED]
Sent: Monday, April 14, 2008 6:36 PM
To: elecraft@mailman.qth.net
Subject: Re:
Guys,
I have a factory kenwood mic mc-43, a MC-60A and
a Heil Pro set all for my TS-850S; will these work
without a rewire? Also who has bought the TXCO what
difference does it make?
Thanks and 73m
Bill N4ZI
Thank you to all who responded to my question about
the six meter beams on the market. Seems that M2 wins
the popular vote (:-))
The originator of the famous NBS design (W0PW) is a
long-time friend and I have a copy of the NBS publication
(#688) covering that design, so I've decided to
Katie-gram received for a 11/7/07 order!
--
73 Allan K7GT
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
Hi Elecrafters !!!
I finally did my K2 universal DATA port. I put the schematic on my
website...
http://www.flickr.com/photos/va2ss/
I say «universal» because I also add audio transformer to keep ground
loop away and a trimmer to the input, so you will be able to keep mic
preamp setting
Got my K3 by USPS priority at noon today. Ordered 10-22-2007, shipped
04-11-2008. Just about to start calibration of the synthesizer. Took about 6
hours to get to this point. This radio is a great pleasure to build as was the
K2 and I'm sure even more fun to operate. My thanks to Elecraft
As reported to me by W4YOK via a letter from the mfg, Ideal, who makes Noalox,
the product that is used
to mate dis-similar metals, is not actually a conductor. It does have vy small
particles of metal in the
grease but those can not really be counted on the conduct, sez mfg. Instead,
it
Knut,
The problem has nothing to do with the receiver. The problem
occurs when the mic input is overdriven and the microphone AGC
reduces the gain in the transmit audio path.
Lyle is working on the problem.
73,
... Joe, W4TV
-Original Message-
From: [EMAIL PROTECTED]
I have a factory kenwood mic mc-43,
Yes (I'm using one)
a MC-60A
Maybe. It will work if you leave the preamplifier off or use batteries.
Otherwise the connection on pin 5 of the mic plug (rig) will need to be
moved to pin 6.
a Heil Pro set all for my TS-850S;
Yes, if it is the
I failed to mention that my K3 is SN #726.
Todd, WA7U
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
45 matches
Mail list logo