Is it possible to have a SWeave chunk inside an enumerate \item? When I try to
add one, LyX kicks me back out of the enumerate environment. (This is with LyX
2.0.0 on Debian testing.)
\item, and the chunk can be put
in the next paragraph but still belongs to this \item.
Thanks for the quick reply.
Would it be possible to tell LyX to output the LaTeX (as opposed to noweb)
Sweave syntax, or would this not solve my issue?
--Lucas
Chunk
data(bluebird)
\end_layout
\begin_layout Chunk
prewhiten(y=diff(bluebird)[,1],x=diff(bluebird)[,2],ylab='CCF')
\end_layout
\begin_layout Chunk
@
\end_layout
\end_body
\end_document
--Lucas
Yihui Xie xie at yihui.name writes:
...
2. use sanitize=TRUE in your chunk options (so that will be replaced
by \); see ?sanitizeTexString in the tikzDevice package for details
That did the trick. Thanks again!
--Lucas
Regards,
Yihui
--
Yihui Xie xieyihui at gmail.com
Phone: 515
Is it possible to have a SWeave chunk inside an enumerate \item? When I try to
add one, LyX kicks me back out of the enumerate environment. (This is with LyX
2.0.0 on Debian testing.)
\item, and the chunk can be put
in the next paragraph but still belongs to this \item.
Thanks for the quick reply.
Would it be possible to tell LyX to output the LaTeX (as opposed to noweb)
Sweave syntax, or would this not solve my issue?
--Lucas
Chunk
data(bluebird)
\end_layout
\begin_layout Chunk
prewhiten(y=diff(bluebird)[,1],x=diff(bluebird)[,2],ylab='CCF')
\end_layout
\begin_layout Chunk
@
\end_layout
\end_body
\end_document
--Lucas
Yihui Xie xie at yihui.name writes:
...
2. use sanitize=TRUE in your chunk options (so that will be replaced
by \); see ?sanitizeTexString in the tikzDevice package for details
That did the trick. Thanks again!
--Lucas
Regards,
Yihui
--
Yihui Xie xieyihui at gmail.com
Phone: 515
Is it possible to have a SWeave chunk inside an enumerate \item? When I try to
add one, LyX kicks me back out of the enumerate environment. (This is with LyX
2.0.0 on Debian testing.)
to write something after \item, and the chunk can be put
> in the next paragraph but still belongs to this \item.
Thanks for the quick reply.
Would it be possible to tell LyX to output the LaTeX (as opposed to noweb)
Sweave syntax, or would this not solve my issue?
--Lucas
nk
library(TSA)
\end_layout
\begin_layout Chunk
data(bluebird)
\end_layout
\begin_layout Chunk
prewhiten(y=diff(bluebird)[,1],x=diff(bluebird)[,2],ylab='CCF')
\end_layout
\begin_layout Chunk
@
\end_layout
\end_body
\end_document
--Lucas
Yihui Xie yihui.name> writes:
...
>
> 2. use sanitize=TRUE in your chunk options (so that & will be replaced
> by \&); see ?sanitizeTexString in the tikzDevice package for details
That did the trick. Thanks again!
--Lucas
>
> Regards,
> Yihui
> --
> Yih
This wiki page suggests there will be ("As of LyX 1.6") a module that would
enable both footnotes as endnotes and displayed as usual footnotes, but I
can't seem to find it: https://wiki.lyx.org/Tips/EndNotes :
"In the 1.6 series, endnotes will be supported by two sorts of layout
modules
t; which I had used to place them. Without that, I
don't see them as endnotes, but just footnotes. Is there another,
expected, way to insert the endnote placeholder when using the Endnote
module?
Thanks,
Luke
On Thu, Jun 16, 2016 at 3:38 AM, Richard Heck <rgh...@lyx.org> wrote:
>
ms to be set to two by default.
Thanks,
Lucas
On Thu, Jun 16, 2016 at 4:48 PM, Richard Heck <rgh...@lyx.org> wrote:
> On 06/16/2016 10:03 AM, Lucas wrote:
>
> Okay, thanks Richard,
>
> The Endnote module is there, but if I add it after commenting out my
> prev
this for, independently, manually, created an index
format that's grouped by subject so that alphabetically indexing wouldn't
have worked anyway.
Thanks for your immediate, experienced, & helpful support Richard,
Luke
On Fri, Jun 17, 2016 at 4:09 AM, Lucas <jaffa225...@gmail.com
-Original Message-
From: Juergen Spitzmueller [EMAIL PROTECTED]
To: lyx-users@lists.lyx.org
Sent: 10/27/06 6:29 PM
Subject: Re: Forcing LyX master document to reformat output?
Stefano Franchi wrote:
When I select the View Pdf option in the
master document, however, LyX not always
the file but does not look like it should be... How do
I solve this problem? Please help me, I've been trying to do this for a
month and no one knows how to solve it :(
Thank you very much!
Lucas Amorim
___
Yahoo! Mail - Sempre
Hello,
What would be a good latex class for writing books and how do I add it
to lyx? I was trying to use the scrbook class provided by the
koma-scripts package on debian, bt there is no scrbook.lyx template...
Thank You!
Lucas Amorim
Hello,
I am making a beamer presentation using lyx. I am trying to add a figure
to a frame, a graph for example. I have converted it to eps. Then I
tryied adding via the option InsertFloatFigure and typinf the adress
to the figure which is in my /home/lucas directory. Then I generated the
pdf via
What version of lyx are you using
I know I use to have that problem under linux with older versions (pre
1.3 I think).
Jim Ragsdale wrote:
Is there a command in lyx that I can use to clear the tmp directory on
windows? If I make small changes sometimes Lyx wont recompile the document.
I have to
I want to know where and how Latex recognises Latex and puts the word
Latex in the latex wacky superscript subscript font?
ie where it sees LaTeX it puts \LaTeX{}
cheers
oz
, 2002 at 04:54:28PM +1030, Owen Lucas wrote:
I want to know where and how Latex recognises Latex and puts the word
Latex in the latex wacky superscript subscript font?
ie where it sees LaTeX it puts \LaTeX{}
LaTeX never does this.
In case of LyX there is some braindead hard-coded mapping in
src
I have a long text file that I wish to put in a Lyx table. Is there
anyway to do this without having to cut and past individual values in to
each cell?
cheers
owen
Ag 328.07 0.0001
Al 396.15 0.1
As 193.70 0.1
Au 267.60 0.005
Be 234.86 0.01
Bi 223.06 0.005
Ca 422.67 0.02
Cd 228.80 0.0l
Co
in scientific notation?
Owen Lucas wrote:
Thanks I was just wanting to know how this was done as I could not
find anything in the .cls or .layout files that would do this. I was
also wondering if I could use this to replace words with some
scientific notation without seeing all the mess in lyx
thanks that worked well
I didnt even need to put the tab in.
just needed to add
--separator=' '
at the command line
for others (particularly in Australia)I got it at
ftp://mirror.aarnet.edu.au/pub/lyx/contrib/csv2lyx-1.0.0.tar.gz
cheers
owen
I Wayan Warmada wrote:
save your file as CSV
notations like this that if I could streem line them it
could make things easyer.
If Maths macros can do this then Ill look into them
cheers
owen
Andre Poenitz wrote:
On Wed, Dec 11, 2002 at 12:32:28PM +1030, Owen Lucas wrote:
Thanks I was just wanting to know how this was done as I could not find
In the past my bibtex worked and worked very well but now its not. It
just puts a ? where the reference should go. I must have done some thing
to it but I cant think what. When I export the dvi it says in the debug
window.
___
things up would be appreciated.
I still dont know why every thing was working ok then wasnt working at
all but still.
cheers
owen
Owen Lucas wrote:
In the past my bibtex worked and worked very well but now its not. It
just puts a ? where the reference should go. I must have done some
Well I dont know if you got a reply from anyone else but here is my
sugestion (havent tryed but think it works). In the preamble you should
be able to set the size with the \small \smaller \large \larger \huge
commands. Having a look at the .cls files you should also be able to do
something by
Hi all
I want to put the page number of my TOC, list of figures, list of tables
in my TOC. To do this I used the
\addcontentsline{toc}{chapter}{Contents}
just after the TOC
all was fine till my TOC was more than one page. At this stage the
\addcontentsline{toc}{chapter}{Contents}
came to live
Seneschal Jerome wrote:
Hi,
I am new on the list.
I have some problem with figure
I would like to put two flottant figures side by side in Lyx as Fig 1 and Fig
2
Well I dont know if its the best way to do it but what I have done in
the past is put the two images in the same float and
I have installed lyx 1.3 on my RH7.3 box with xforms xforms-0.89-1
I ame using the british language package for aspell
When using the spell checker the text boxes do not update when it moves
on to the next wrong word. if you click on that element it will update
that element but none of the
Hi I like the look and feel of xforms so are trying to install the new
xforms 1.0. Try as I might I have been unable to get this to install the
way lyx wants it. I first tryed building it from xforms-1.0-release.tgz
This seemed to work fine but lyx didnt like it for some reason??
I followed your
I have put the latest xforms on and the spell checker still isnt
working. Has anyone else got this problem?
Owen Lucas wrote:
I have installed lyx 1.3 on my RH7.3 box with xforms xforms-0.89-1
I ame using the british language package for aspell
When using the spell checker the text boxes do
;
FILE *outfile;
char inchar;
/* take action on input arguments*/
if (argc ==1) /*case for no file name input*/
{
printf(\n Created by\n);
printf( Owen Lucas\n);
printf
I would like to use a symbol from the marvosym package.
i have put \usepackage{marvosym} in my preamble and some symbols work
some don't
Im particuarly after \Laserbeam?
does anyone know how to do this?
has it got anything to do with the viewer?
[olucas@mechol1 olucas]$ locate marvosym
Looks the same under Ghostview and acroread so its probably something else.
cheers
owen
Steven Homolya wrote:
On Wed, 19 Feb 2003, owen lucas wrote:
I would like to use a symbol from the marvosym package.
i have put \usepackage{marvosym} in my preamble and some symbols work
some don't
has
Dekel Tsur wrote:
Do you try to use these symbol in math mode ?
If not, give a short example file.
The symbols don't work at all in Maths mode. I was entering them as ERT.
An example is attached.
cheers
Owen
#LyX 1.3 created this file. For more info see http://www.lyx.org/
\lyxformat 221
Although it probably goes against the LyX GUI feel I think that once you
know what you want, using the keyboard is a much faster and convenient
way to select the style.
Paul Medwell wrote:
You can manually change the ordering of the styles by using something
like the following in your .layout
I think that this depends on what bst you are using.
In the past I have put \usepackage [authoryear,round] {natbib} in my
preamble but there may be a better way to do it in new versions of lyx.
These days I use the harvard package which uses round as standard.
cheers
owen
mark boydell wrote:
When in maths mode you can press meta-m and it allows you to type in
commands as shown in maths.bind. I can get the single character options
to work but cant get the multiple ones to key in. in the file maths.bind
these multi character commands start with. ~S- I assume that you need
to press
O wait I get it now when you go meta-m and it gived you options like
slash it means / not slash.
Owen Lucas wrote:
When in maths mode you can press meta-m and it allows you to type in
commands as shown in maths.bind. I can get the single character options
to work but cant get the multiple
The way I do this is to include the options to not filter the image when
converting to pdf
In lyx under edit-preferences
select the conversion then converters tab and then select Postscript -PDF
then in the converter box where it says ps2pdf place the line
ps2pdf -dAutoFilterGrayImages=false
To change the algorithm header put
\floatname{algorithm}{What you want}
in the preamble this will change what it looks like (but probably not
when looking at lyx)
when you want to insert a list of algorithm in ERT put
\listof{algorithm}{List of What you want}
there is probably one
I assume that you did try that
ps2pdf -dAutoFilterGrayImages=false -dAutoFilterColorImages=false
-dGrayImageFilter=/FlateEncode -dColorImageFilter=/FlateEncode $$i
option. This usually works fine for me and the image in the PDF is as
good as the file given to it. Exactly what type of images
I have 1.3.0 installed and so I downloaded the patch to upgrade it first
off it does the following
[EMAIL PROTECTED] lyx-1.3.0]# make distclean
cd . /bin/sh ./config.status Makefile
config.status: creating Makefile
Making distclean in lib
make[1]: Entering directory `/usr/bin/lyx-1.3.0/lib'
Also could I point out that do have Autoconf 2.57
Owen Lucas wrote:
[EMAIL PROTECTED] automake-1.6.2]$ ./configure
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for gawk... gawk
checking whether make sets ${MAKE}... yes
Woops worked it out. some old unupdated soft linked stuff.
I have now upgraded lyx and it seems to be working
cheers
owen
Owen Lucas wrote:
Also could I point out that do have Autoconf 2.57
Owen Lucas wrote:
[EMAIL PROTECTED] automake-1.6.2]$ ./configure
checking for a BSD-compatible
I am using the harvard bibtex package. I would like to use PDFlatex to
produce the final pdf as it seems to do a better job then ps2pdf etc.
However pdflatex does not work when I use the harvard package. I can
view it in every other way but pdflatx just spits out errors like
command [EMAIL
I can do this in a bit of a messy way
go into enumerate then type in
[description1] Some text ... and hit return
then change the enviroment depth with the third button from the left on
you tool bar. Then change back into standard and type in what you want.
once that is finished hit return and go
This is how I would do it
Just before the place where the bibtex bibliography is placed put in ert
\renewcommand\bibname{\tiny Bibliography}
you can replace tiny with whatever latex you want to format the text
cheers
owen
Myriam Abramson wrote:
I have to format the spacing and the font of the
Same sort of thing as what I suggested for the bibliography
but this time but instead of inserting list of Algorithms place in ert
\listof{algorithm}{\tiny List of What you want}
where \tiny can be replaced with whatever formating options you want.
cheers
owen
Myriam Abramson wrote:
Thanks. That
here is my hatchet latex job
This requires some mucking arround with some of the settings in the .cls
in your preamble or at the start of your document. With the number of
mods you want to do it may be worth copying the article.cls file and
editing that.
as for the size of the section headers
I have some questions!
1 Is the temperature of the pipe wall constant or is it varying along
its length. It says that is 30deg C above the mean air temperature but
is this the temperature at that point or is it 30 deg about the mean air
inlet temperature it 230 deg C.
2 Does the answer need
Is this just the standard problem every one has with PDF's first off?
For me I did this to get good pdf fonts
in lyx under documents
set font to roman
set encoding to standard
change the file
usr/share/texmf/dvips/config (as
a root) and change in file updmap lines from
type1_default=false
Robin wrote:
BTW, I'm sure that if a benevolent millionaire were to pay a team of LyX
developers to implement every feature request anyone has come up with
here or on Bugzilla, someone would write in to complain about LyX being
bloated and say there is a need for a lightweight front-end to
I some times have a similar problem with the spell checker with lyx
1.3.1 and 1.3.2 with xforms 1. Unfortunatly I dont know the solution. I
think it may be more a glitch in xforms then lyx but I dont know.
David L. Johnson wrote:
On Wed, 2003-07-09 at 21:05, Owen Lucas wrote:
What front end
I think I can recall something about longtables not working properly in
floats.But have a look at the online help to confirm this
cheers
Owen
Holger Zebner wrote:
Hi list,
I have a problem with longtables.
All tables are placed inside floats and have a caption.
When I tick in the table dialog at
at the command prompt type
latex makebst
if I remember correctly.
Osvaldo Fornaro wrote:
Hi list,
Sorry for this question, but i am a bit lost. Please, someone could remember
me what is the name of the program to generate bst files?
I just use it and now i can not to find it!
Thank you!
the option to select these diferent types is coming but I assume
since diferent reference formats have some what diferent commands its
hard to smoothly impliment.
For the style I use \cite{my_book} puts (Lucas, 2002) and
\citeasnoun{my_book} as Lucas (2002). In effect I have it the other way
round
highlight the image then go layout paragraph then select center.
I belive you can automaticly centre all images but putting something in
the preamble but cant remember what it is now. Have a bit of a look in
the past postings
cheers
Owen
Rich Shepard wrote:
I have inserted figures in a book
Thanks Ive noticed that in the past but didn't really pay much attention
to it.
Herbert Voß wrote:
this is the wrong way, because you'll get some more
vertical space between image and caption which does
not look fine. This space comes from the environment
center.
Use instead as first line in
does anyone know where I can get xforms 1.0.2 from. The lyx 1.3.2
announcement said from http://www.nongnu.org/xforms/ but this points to
another site that only has xforms 0.89 . I have found RPM's for suse
and spark but not RH9. Someone was saying that the source code isnt out
there but
/libformsGL.so.1.0.0
/usr/X11R6/lib/libforms.so.1.0
/usr/X11R6/lib/libformsGL.so
/usr/X11R6/lib/libforms.la
/usr/X11R6/lib/libforms.so.1.0.0
and when lyx compiles it still says xforms 1.0.0
is this correct or have I done something wong
thanks
Owen
Marcin Bukat wrote:
Uz.ytkownik Owen Lucas napisa
yep thanks that was the problem.
there was one in
/usr/X11R6/include/X11/forms.h
and
/usr/local/include/forms.h
problem sorted
well sort of.
cheers
Owen
Jean-Marc Lasgouttes wrote:
Owen == Owen Lucas [EMAIL PROTECTED] writes:
Owen I downloaded it and installed it but I dont know
I think its as simple as giving it a label.
so make a displayed maths thing
Ctrl-Shift-M
enter something
\pi
then insert a label INTO the equation by going to insert then down to label.
that should do it
oz
Rich Shepard wrote:
If writing in straight LaTeX one can \begin{equation} ...
you can use a ert to do this caption
simply put
\caption [thing to go in tof]{thing to go under figure \cite{book}}
where you want the caption to go above or below the figure
oz
Darin wrote:
Hello,
When I make a List of Figures (via Insert-Lists TOC
- List of Figures), the list formed uses
I use matlab and LyX all the time. I would simply suggest staying away
from jpgs. The jpg output from matlab is usually poor quality and it
only gets worse when the LyX output is produced. Enlighten me if there
is a reason that jpg is the only way to go.
Melanie Gross wrote:
Hi,
I inserted
yep I agree with that
oz
Jean-Pierre.Chretien wrote:
I guess that png export is better than jpg export, as
matlab creates vector-like bitmaps, so that straight lines
are messed up in jpg.
My personal rule:
jpg for pictures
png for graphics when eps is not available (screenshots, ...)
I have just installed lyx-1.3.4
usual thing
(as root)
tar -jxf lyx-1.3.4.tar.bz2
cd lyx-1.3.4/
./configure
make
make install
when I run lyx as anyone other then root it spits out the following
stuff and cant find any classes.
anyone know why? O and I have done a reconfigure and restart.
thanks
Angus Leeming wrote:
Remove ~/.lyx/textclass.lst and, as olucas, reconfigure and restart
lyx. All should then be Ok.
Yep did that and no joy. But why is it complaining about
/usr/share/lyx/textclass.lst
I removed that one too and didn make install again now it just says
[EMAIL PROTECTED]
Angus Leeming wrote:
Doesn't this suggest to you that you have rather too much cruft from
earlier versions lying around?
yep it does. A clean out it is then
-Original Message-
From: Juergen Spitzmueller [EMAIL PROTECTED]
To: lyx-users@lists.lyx.org
Sent: 10/27/06 6:29 PM
Subject: Re: Forcing LyX master document to reformat output?
Stefano Franchi wrote:
When I select the View Pdf option in the
master document, however, LyX not always
the file but does not look like it should be... How do
I solve this problem? Please help me, I've been trying to do this for a
month and no one knows how to solve it :(
Thank you very much!
Lucas Amorim
___
Yahoo! Mail - Sempre
Hello,
What would be a good latex class for writing books and how do I add it
to lyx? I was trying to use the scrbook class provided by the
koma-scripts package on debian, bt there is no scrbook.lyx template...
Thank You!
Lucas Amorim
Hello,
I am making a beamer presentation using lyx. I am trying to add a figure
to a frame, a graph for example. I have converted it to eps. Then I
tryied adding via the option InsertFloatFigure and typinf the adress
to the figure which is in my /home/lucas directory. Then I generated the
pdf via
What version of lyx are you using
I know I use to have that problem under linux with older versions (pre
1.3 I think).
Jim Ragsdale wrote:
Is there a command in lyx that I can use to clear the tmp directory on
windows? If I make small changes sometimes Lyx wont recompile the document.
I have to
Hi I like the look and feel of xforms so are trying to install the new
xforms 1.0. Try as I might I have been unable to get this to install the
way lyx wants it. I first tryed building it from xforms-1.0-release.tgz
This seemed to work fine but lyx didnt like it for some reason??
I followed your
I have put the latest xforms on and the spell checker still isnt
working. Has anyone else got this problem?
Owen Lucas wrote:
I have installed lyx 1.3 on my RH7.3 box with xforms xforms-0.89-1
I ame using the british language package for aspell
When using the spell checker the text boxes do
;
FILE *outfile;
char inchar;
/* take action on input arguments*/
if (argc ==1) /*case for no file name input*/
{
printf(\n Created by\n);
printf( Owen Lucas\n);
printf
I would like to use a symbol from the marvosym package.
i have put \usepackage{marvosym} in my preamble and some symbols work
some don't
Im particuarly after \Laserbeam?
does anyone know how to do this?
has it got anything to do with the viewer?
[olucas@mechol1 olucas]$ locate marvosym
Looks the same under Ghostview and acroread so its probably something else.
cheers
owen
Steven Homolya wrote:
On Wed, 19 Feb 2003, owen lucas wrote:
I would like to use a symbol from the marvosym package.
i have put \usepackage{marvosym} in my preamble and some symbols work
some don't
has
Dekel Tsur wrote:
Do you try to use these symbol in math mode ?
If not, give a short example file.
The symbols don't work at all in Maths mode. I was entering them as ERT.
An example is attached.
cheers
Owen
#LyX 1.3 created this file. For more info see http://www.lyx.org/
\lyxformat 221
Although it probably goes against the LyX GUI feel I think that once you
know what you want, using the keyboard is a much faster and convenient
way to select the style.
Paul Medwell wrote:
You can manually change the ordering of the styles by using something
like the following in your .layout
I think that this depends on what bst you are using.
In the past I have put \usepackage [authoryear,round] {natbib} in my
preamble but there may be a better way to do it in new versions of lyx.
These days I use the harvard package which uses round as standard.
cheers
owen
mark boydell wrote:
When in maths mode you can press meta-m and it allows you to type in
commands as shown in maths.bind. I can get the single character options
to work but cant get the multiple ones to key in. in the file maths.bind
these multi character commands start with. ~S- I assume that you need
to press
O wait I get it now when you go meta-m and it gived you options like
slash it means / not slash.
Owen Lucas wrote:
When in maths mode you can press meta-m and it allows you to type in
commands as shown in maths.bind. I can get the single character options
to work but cant get the multiple
The way I do this is to include the options to not filter the image when
converting to pdf
In lyx under edit-preferences
select the conversion then converters tab and then select Postscript -PDF
then in the converter box where it says ps2pdf place the line
ps2pdf -dAutoFilterGrayImages=false
To change the algorithm header put
\floatname{algorithm}{What you want}
in the preamble this will change what it looks like (but probably not
when looking at lyx)
when you want to insert a list of algorithm in ERT put
\listof{algorithm}{List of What you want}
there is probably one
I assume that you did try that
ps2pdf -dAutoFilterGrayImages=false -dAutoFilterColorImages=false
-dGrayImageFilter=/FlateEncode -dColorImageFilter=/FlateEncode $$i
option. This usually works fine for me and the image in the PDF is as
good as the file given to it. Exactly what type of images
I have 1.3.0 installed and so I downloaded the patch to upgrade it first
off it does the following
[EMAIL PROTECTED] lyx-1.3.0]# make distclean
cd . /bin/sh ./config.status Makefile
config.status: creating Makefile
Making distclean in lib
make[1]: Entering directory `/usr/bin/lyx-1.3.0/lib'
Also could I point out that do have Autoconf 2.57
Owen Lucas wrote:
[EMAIL PROTECTED] automake-1.6.2]$ ./configure
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for gawk... gawk
checking whether make sets ${MAKE}... yes
Woops worked it out. some old unupdated soft linked stuff.
I have now upgraded lyx and it seems to be working
cheers
owen
Owen Lucas wrote:
Also could I point out that do have Autoconf 2.57
Owen Lucas wrote:
[EMAIL PROTECTED] automake-1.6.2]$ ./configure
checking for a BSD-compatible
I am using the harvard bibtex package. I would like to use PDFlatex to
produce the final pdf as it seems to do a better job then ps2pdf etc.
However pdflatex does not work when I use the harvard package. I can
view it in every other way but pdflatx just spits out errors like
command [EMAIL
I can do this in a bit of a messy way
go into enumerate then type in
[description1] Some text ... and hit return
then change the enviroment depth with the third button from the left on
you tool bar. Then change back into standard and type in what you want.
once that is finished hit return and go
This is how I would do it
Just before the place where the bibtex bibliography is placed put in ert
\renewcommand\bibname{\tiny Bibliography}
you can replace tiny with whatever latex you want to format the text
cheers
owen
Myriam Abramson wrote:
I have to format the spacing and the font of the
Same sort of thing as what I suggested for the bibliography
but this time but instead of inserting list of Algorithms place in ert
\listof{algorithm}{\tiny List of What you want}
where \tiny can be replaced with whatever formating options you want.
cheers
owen
Myriam Abramson wrote:
Thanks. That
here is my hatchet latex job
This requires some mucking arround with some of the settings in the .cls
in your preamble or at the start of your document. With the number of
mods you want to do it may be worth copying the article.cls file and
editing that.
as for the size of the section headers
I have some questions!
1 Is the temperature of the pipe wall constant or is it varying along
its length. It says that is 30deg C above the mean air temperature but
is this the temperature at that point or is it 30 deg about the mean air
inlet temperature it 230 deg C.
2 Does the answer need
1 - 100 of 187 matches
Mail list logo
