Yeah, I can't see any difference in the ethernet ports, so I assumed they'll still have the same problems. I haven't actually seen any problems with the ethernet on an AF5XHD yet... but it doesn't always happen on the old radios either, so that doesn't prove much. They also have the advantage that of a usable second ethernet port, so you can hook up both and hope at least one keeps working.
On Fri, Nov 16, 2018 at 2:50 PM Adam Moffett <[email protected]> wrote: > I didn't have any problem installing the boots or plugging or unplugging a > cable with the boot installed. > The AF5XHD is good for the money. I can't complain. The only thing I'd > be ware of is you really want a super hot CINR to hit the high data rates > that they advertise. > > We just used an AF5XHD with 34dbi dishes to replace an ePMP with their > 25dbi dishes. On the exact same channel the ePMP was on, the AF5XHD didn't > actually give us better throughput. We did end up getting more than double > the speed after shuffling channels around to reduce interference. It's > unfortunately still only getting 64QAM (4x) in one direction due to > interference, but it's 1024QAM (10x) in the other direction. > > On 11/16/2018 3:04 PM, Josh Luthman wrote: > > Who said that? It's the exact same problem, it's so damn loose. Yes, you > still have to force that cable up there for it to work. > > They did include a rubber IP67 boot. If you put this inside and try to > put a cat5/rj45 in there you'll destroy the female jack of the radio. I > would guess if you slid the rubber thing over the cat5, plugged it in, and > kept that boot in there it would help it from coming down at all but the > trade there is a new tech will destroy the radio more often than what the > boot would help... > > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > On Fri, Nov 16, 2018 at 2:34 PM, Kurt Fankhauser <[email protected] > > wrote: > >> Josh, >> >> I thought they fixed the Ethernet jack on the AF5XHD? That is what UBNT >> is telling me they said they found a problem vendor. Are you still having >> issues where you have to push the RJ45 up into the AF to get the ethernet >> link to come back? >> >> On Thu, Nov 15, 2018 at 2:15 PM Josh Luthman <[email protected]> >> wrote: >> >>> AF5Xhd is pretty sweet. I'm happier radio wise than the AF5X. It's >>> still a shit ethernet jack. >>> >>> As to ptmp, the snmp seems to be built with that in mind. As to when >>> it'll come, all I can say is I've heard questions with no answer. >>> >>> >>> Josh Luthman >>> Office: 937-552-2340 >>> Direct: 937-552-2343 >>> 1100 Wayne St >>> <https://maps.google.com/?q=1100+Wayne+St+Suite+1337+Troy,+OH+45373&entry=gmail&source=g> >>> Suite 1337 >>> <https://maps.google.com/?q=1100+Wayne+St+Suite+1337+Troy,+OH+45373&entry=gmail&source=g> >>> Troy, OH 45373 >>> <https://maps.google.com/?q=1100+Wayne+St+Suite+1337+Troy,+OH+45373&entry=gmail&source=g> >>> >>> On Thu, Nov 15, 2018 at 1:53 PM, Joe Novak <[email protected]> wrote: >>> >>>> We have been using the AF5XHD as well. I'm happy with it as a PTP >>>> platform, but in a lot of our areas we are running 2 foot dishes for even >>>> the shorter hops to achieve the SNR for 1024QAM. It's kicking ass though, >>>> and these links probably should have been bigger dishes to begin with so it >>>> is what it is. >>>> >>>> Highlights are mostly that now 256Q(8x) has a effective output power of >>>> 21db-22db, compared to the 18db on a good day of the original 5X. I think >>>> 1024Q (10x) is now more like 18db-19db now which is a huge improvement >>>> compared to the original 5X. It has helped quite a few of the links we have >>>> replaced. >>>> >>>> Joe >>>> >>>> On Thu, Nov 15, 2018 at 12:19 PM Timothy Steele < >>>> [email protected]> wrote: >>>> >>>>> AirFiberxHD (PTP LTU) has been working awesome at least 2 times the >>>>> throughput and uses a lot less power then AirfiberX >>>>> >>>>> grate for solar sites >>>>> >>>>> >>>>> >>>>> On Thu, Nov 15, 2018 at 12:42 PM Sean Heskett <[email protected]> wrote: >>>>> >>>>>> Who cares, Ubiquiti likes to sue their customers so why would anyone >>>>>> wanna buy their crap?!?! >>>>>> >>>>>> -Sean >>>>>> >>>>>> >>>>>> On Thu, Nov 15, 2018 at 10:31 AM Paul McCall <[email protected]> >>>>>> wrote: >>>>>> >>>>>>> Has anyone heard any update on when the PTMP Airfiber or other UBNT >>>>>>> LTU gear is coming? >>>>>>> >>>>>>> >>>>>>> >>>>>>> It seems like the fodder / vaporware cycle on this has been running >>>>>>> long then normal >>>>>>> >>>>>>> >>>>>>> >>>>>>> Paul >>>>>>> -- >>>>>>> AF mailing list >>>>>>> [email protected] >>>>>>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >>>>>>> >>>>>> -- >>>>>> AF mailing list >>>>>> [email protected] >>>>>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >>>>>> >>>>> -- >>>>> AF mailing list >>>>> [email protected] >>>>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >>>>> >>>> >>>> -- >>>> AF mailing list >>>> [email protected] >>>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >>>> >>>> >>> -- >>> AF mailing list >>> [email protected] >>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >>> >> >> -- >> AF mailing list >> [email protected] >> http://af.afmug.com/mailman/listinfo/af_af.afmug.com >> >> > > > -- > AF mailing list > [email protected] > http://af.afmug.com/mailman/listinfo/af_af.afmug.com >
-- AF mailing list [email protected] http://af.afmug.com/mailman/listinfo/af_af.afmug.com
