OK This is getting interesting now
I had a second TDM400P with 3FXO's so I did the following
Shutdown
Remove old 400 let it un-install, Shutdown
Install new TDM400p 3FXO It finds the hardware, I regen the zaptel conf with
modprode wctdm
modprobe zaptel
genzaptelconf
# ztcfg -vvvv
gives me the following
+++++++++++++++++
Zaptel Version: SVN-trunk-r1369
Echo Canceller: MG2
Configuration
======================
Channel map:
Channel 01: FXS Kewlstart (Default) (Slaves: 01)
Channel 02: FXS Kewlstart (Default) (Slaves: 02)
Channel 03: FXS Kewlstart (Default) (Slaves: 03)
3 channels configured.
+++++++++++++++++
Looks good so of I go to my phone tie up channel 1
put a call out on channel 2 and It goes through not great sound quality but
it goes, I think problem solved, not so
I realized I plugged a live phone line into channel 2 but not 1 I forgot to
hook it in yadda yadda.
So I hook up line 1 make a call no problem can't get line 2 to work
again. I move the line to channel 3 from channel 1 channel 2 calls out but
3 is fast busy. It seems that if there are no calls established it will
work on any channel but one channel down it does not issue the prefix for
my centrex.
Puzzled
Bernie
