In the trunk menu, try specifying the zap group as ZAP/G0 instead of ZAP/g0. The capital should use a descending trunk selection order. That will confirm your observation that the problem is the second channel to be selected, not the physical 'channel 2'.
BTW, I'm also pretty puzzled. When you watch the call go through from the CLI, and it's dialing the number, does it show the 8 in front of the number? Are you using 9 to access any other trunk group on your asterisk box? IE What would happen if I were to dial 9-416-555-1212 on one of your phones? Dave On 8/30/06, Bernie Borgmann <[EMAIL PROTECTED]> wrote:
OK This is getting interesting now I had a second TDM400P with 3FXO's so I did the following Shutdown Remove old 400 let it un-install, Shutdown Install new TDM400p 3FXO It finds the hardware, I regen the zaptel conf with modprode wctdm modprobe zaptel genzaptelconf # ztcfg -vvvv gives me the following +++++++++++++++++ Zaptel Version: SVN-trunk-r1369 Echo Canceller: MG2 Configuration ====================== Channel map: Channel 01: FXS Kewlstart (Default) (Slaves: 01) Channel 02: FXS Kewlstart (Default) (Slaves: 02) Channel 03: FXS Kewlstart (Default) (Slaves: 03) 3 channels configured. +++++++++++++++++ Looks good so of I go to my phone tie up channel 1 put a call out on channel 2 and It goes through not great sound quality but it goes, I think problem solved, not so I realized I plugged a live phone line into channel 2 but not 1 I forgot to hook it in yadda yadda. So I hook up line 1 make a call no problem can't get line 2 to work again. I move the line to channel 3 from channel 1 channel 2 calls out but 3 is fast busy. It seems that if there are no calls established it will work on any channel but one channel down it does not issue the prefix for my centrex. Puzzled Bernie --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
-- David Donovan Consultant Fulcrum Solutions
