The box under the display is the controller. On Sun, Mar 20, 2016 at 7:40 PM, Eric Christoffersen <[email protected]> wrote:
> Honestly I don't remember which is which with the temp control stuff. This > is a b2 so original stuff was replaced long ago. I had to replace > the display again a while ago (error code A2.) > > There is a biggish box bolted to the bottom of the machine, I think its's > a relay of some sort? Then there is the display which I assumed contained > the pid, and finally there is a box under the display, I thought it was > just a big switchbox. > > Anyhoo. I tried probing around the exposed connections and couldn't find > what might be the source of the brew warm signal. Where should I test to > diagnose further? > > Eric > > -- > You received this message because you are subscribed to the Google Groups > "Brewtus" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To post to this group, send email to [email protected]. > Visit this group at https://groups.google.com/group/brewtus. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at https://groups.google.com/group/brewtus. For more options, visit https://groups.google.com/d/optout.
