Have you called Todd/WLL? He might have a way of testing the Giemme. I still think it might be covered if bad; six months is way too short for a life span on that part.
Sent from my apple IIe > On May 19, 2016, at 11:18, Eric S <[email protected]> wrote: > > The first relay with one large contact closes when the machine turns on, > opens back up when the machine goes off, but I can't see anything happening > with the second relay. > >> On Thursday, May 19, 2016 at 12:47:30 PM UTC-5, bmacpiper wrote: >> Perhaps look through the blue clear box inside at the two relays--mine had >> browned the plastic a bit but was barely noticeable. >> b >> >> Sent from my apple IIe >> >>> On May 19, 2016, at 10:43, Eric S <[email protected]> wrote: >>> >>> I took the cover off the giemme box this morning, and didn't see anything >>> obvious. I had a blown transformer on my last machine, but this one >>> doesn't look burnt like that one did. >>> >>> When I turn the machine on there is a click, but its in the AKO controller, >>> not the giemme box. Is that what you are talking about? >>> >>>> On Thursday, May 19, 2016 at 11:39:14 AM UTC-5, Ira wrote: >>>> Hello Eric, >>>> >>>> Wednesday, May 18, 2016, 3:45:34 PM, you wrote: >>>> >>>> >>>> The pump works to fill the boilers, which I understand is its first job. >>>> but once the boilers are full it switches power to the pressure stat. to >>>> turn on the heaters. The white wire at the top of the pressure stat, I >>>> guess should be the power in. There is no power there. I chased that >>>> wire back to the terminal in the giemme box that says resistenza. >>>> >>>> >>>> Well, sounds like it's time to look inside the Gimme box and see if you >>>> can see something wrong. When you power the machine on, does the box click >>>> a bit later, few seconds max? If the box clicks, the pressurestat should >>>> get power. >>>> >>>> -- Ira >>> >>> -- >>> You received this message because you are subscribed to the Google Groups >>> "Brewtus" group. >>> To unsubscribe from this group and stop receiving emails from it, send an >>> email to [email protected]. >>> To post to this group, send email to [email protected]. >>> Visit this group at https://groups.google.com/group/brewtus. >>> For more options, visit https://groups.google.com/d/optout. > > -- > You received this message because you are subscribed to the Google Groups > "Brewtus" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To post to this group, send email to [email protected]. > Visit this group at https://groups.google.com/group/brewtus. > For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at https://groups.google.com/group/brewtus. For more options, visit https://groups.google.com/d/optout.
