no, but I might have to try that. On Thursday, May 19, 2016 at 1:26:15 PM UTC-5, bmacpiper wrote: > > Have you called Todd/WLL? He might have a way of testing the Giemme. I > still think it might be covered if bad; six months is way too short for a > life span on that part. > > Sent from my apple IIe > > On May 19, 2016, at 11:18, Eric S <[email protected] <javascript:>> > wrote: > > The first relay with one large contact closes when the machine turns on, > opens back up when the machine goes off, but I can't see anything happening > with the second relay. > > On Thursday, May 19, 2016 at 12:47:30 PM UTC-5, bmacpiper wrote: >> >> Perhaps look through the blue clear box inside at the two relays--mine >> had browned the plastic a bit but was barely noticeable. >> b >> >> Sent from my apple IIe >> >> On May 19, 2016, at 10:43, Eric S <[email protected]> wrote: >> >> I took the cover off the giemme box this morning, and didn't see anything >> obvious. I had a blown transformer on my last machine, but this one >> doesn't look burnt like that one did. >> >> When I turn the machine on there is a click, but its in the AKO >> controller, not the giemme box. Is that what you are talking about? >> >> On Thursday, May 19, 2016 at 11:39:14 AM UTC-5, Ira wrote: >>> >>> Hello Eric, >>> >>> Wednesday, May 18, 2016, 3:45:34 PM, you wrote: >>> >>> >>> The pump works to fill the boilers, which I understand is its first job. >>> but once the boilers are full it switches power to the pressure stat. to >>> turn on the heaters. The white wire at the top of the pressure stat, I >>> guess should be the power in. There is no power there. I chased that wire >>> back to the terminal in the giemme box that says resistenza. >>> >>> >>> Well, sounds like it's time to look inside the Gimme box and see if you >>> can see something wrong. When you power the machine on, does the box click >>> a bit later, few seconds max? If the box clicks, the pressurestat should >>> get power. >>> >>> -- Ira >>> >> -- >> You received this message because you are subscribed to the Google Groups >> "Brewtus" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> To post to this group, send email to [email protected]. >> Visit this group at https://groups.google.com/group/brewtus. >> For more options, visit https://groups.google.com/d/optout. >> >> -- > You received this message because you are subscribed to the Google Groups > "Brewtus" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected] <javascript:>. > To post to this group, send email to [email protected] <javascript:> > . > Visit this group at https://groups.google.com/group/brewtus. > For more options, visit https://groups.google.com/d/optout. > >
-- You received this message because you are subscribed to the Google Groups "Brewtus" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at https://groups.google.com/group/brewtus. For more options, visit https://groups.google.com/d/optout.
