I took the cover off the giemme box this morning, and didn't see anything obvious. I had a blown transformer on my last machine, but this one doesn't look burnt like that one did.
When I turn the machine on there is a click, but its in the AKO controller, not the giemme box. Is that what you are talking about? On Thursday, May 19, 2016 at 11:39:14 AM UTC-5, Ira wrote: > > Hello Eric, > > Wednesday, May 18, 2016, 3:45:34 PM, you wrote: > > > The pump works to fill the boilers, which I understand is its first job. > but once the boilers are full it switches power to the pressure stat. to > turn on the heaters. The white wire at the top of the pressure stat, I > guess should be the power in. There is no power there. I chased that wire > back to the terminal in the giemme box that says resistenza. > > > Well, sounds like it's time to look inside the Gimme box and see if you > can see something wrong. When you power the machine on, does the box click > a bit later, few seconds max? If the box clicks, the pressurestat should > get power. > > -- Ira > -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at https://groups.google.com/group/brewtus. For more options, visit https://groups.google.com/d/optout.
