The first relay with one large contact closes when the machine turns on, 
opens back up when the machine goes off, but I can't see anything happening 
with the second relay.  

On Thursday, May 19, 2016 at 12:47:30 PM UTC-5, bmacpiper wrote:
>
> Perhaps look through the blue clear box inside at the two relays--mine had 
> browned the plastic a bit but was barely noticeable.
> b
>
> Sent from my apple IIe
>
> On May 19, 2016, at 10:43, Eric S <[email protected] <javascript:>> 
> wrote:
>
> I took the cover off the giemme box this morning, and didn't see anything 
> obvious.  I had a blown transformer on my last machine, but this one 
> doesn't look burnt like that one did. 
>
> When I turn the machine on there is a click, but its in the AKO 
> controller, not the giemme box.  Is that what you are talking about?
>
> On Thursday, May 19, 2016 at 11:39:14 AM UTC-5, Ira wrote:
>>
>> Hello Eric,
>>
>> Wednesday, May 18, 2016, 3:45:34 PM, you wrote:
>>
>>
>> The pump works to fill the boilers, which I understand is its first job. 
>> but once the boilers are full it switches power to the pressure stat.  to 
>> turn on the heaters.  The white wire at the top of the pressure stat, I 
>> guess should be the power in.  There is no power there.  I chased that wire 
>> back to the terminal in the giemme box that says resistenza.
>>
>>
>> Well, sounds like it's time to look inside the Gimme box and see if you 
>> can see something wrong. When you power the machine on, does the box click 
>> a bit later, few seconds max? If the box clicks, the pressurestat should 
>> get power. 
>>
>> -- Ira
>>
> -- 
> You received this message because you are subscribed to the Google Groups 
> "Brewtus" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to [email protected] <javascript:>.
> To post to this group, send email to [email protected] <javascript:>
> .
> Visit this group at https://groups.google.com/group/brewtus.
> For more options, visit https://groups.google.com/d/optout.
>
>

-- 
You received this message because you are subscribed to the Google Groups 
"Brewtus" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
To post to this group, send email to [email protected].
Visit this group at https://groups.google.com/group/brewtus.
For more options, visit https://groups.google.com/d/optout.

Reply via email to