Perhaps look through the blue clear box inside at the two relays--mine had 
browned the plastic a bit but was barely noticeable.
b

Sent from my apple IIe

> On May 19, 2016, at 10:43, Eric S <[email protected]> wrote:
> 
> I took the cover off the giemme box this morning, and didn't see anything 
> obvious.  I had a blown transformer on my last machine, but this one doesn't 
> look burnt like that one did. 
> 
> When I turn the machine on there is a click, but its in the AKO controller, 
> not the giemme box.  Is that what you are talking about?
> 
>> On Thursday, May 19, 2016 at 11:39:14 AM UTC-5, Ira wrote:
>> Hello Eric,
>> 
>> Wednesday, May 18, 2016, 3:45:34 PM, you wrote:
>> 
>> 
>> The pump works to fill the boilers, which I understand is its first job. but 
>> once the boilers are full it switches power to the pressure stat.  to turn 
>> on the heaters.  The white wire at the top of the pressure stat, I guess 
>> should be the power in.  There is no power there.  I chased that wire back 
>> to the terminal in the giemme box that says resistenza.
>> 
>> 
>> Well, sounds like it's time to look inside the Gimme box and see if you can 
>> see something wrong. When you power the machine on, does the box click a bit 
>> later, few seconds max? If the box clicks, the pressurestat should get 
>> power. 
>> 
>> -- Ira
> 
> -- 
> You received this message because you are subscribed to the Google Groups 
> "Brewtus" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to [email protected].
> To post to this group, send email to [email protected].
> Visit this group at https://groups.google.com/group/brewtus.
> For more options, visit https://groups.google.com/d/optout.

-- 
You received this message because you are subscribed to the Google Groups 
"Brewtus" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
To post to this group, send email to [email protected].
Visit this group at https://groups.google.com/group/brewtus.
For more options, visit https://groups.google.com/d/optout.

Reply via email to