I have full power at the main power switch, and full power if I put the probes where wires 1 and 2 go into the giemme control box. the neutral (blue and white) is in place one, and the hot (white) is in place two.
The pump works to fill the boilers, which I understand is its first job. but once the boilers are full it switches power to the pressure stat. to turn on the heaters. The white wire at the top of the pressure stat, I guess should be the power in. There is no power there. I chased that wire back to the terminal in the giemme box that says resistenza. On Wednesday, May 18, 2016 at 5:27:15 PM UTC-5, Ira wrote: > > Hello Eric, > > Wednesday, May 18, 2016, 2:52:47 PM, you wrote: > > > with the red probe from my meter on the top post on the pressure stat and > the black on ground. Am I doing that wrong? > > > Also not getting full power to the overtemp switches either > > You should be measuring to the white wire coming into the machine. The > white wire goes to one side of the power switch and then the other side > continues on to both heating elements, the pump, control boxes and the > solenoid. The wire coming from the power switch seems like it's most likely > white with a blue stripe. > > If those colors make no sense, you may have a newer version than my > documentation covers. > > > Ira > > -- Ira > -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at https://groups.google.com/group/brewtus. For more options, visit https://groups.google.com/d/optout.
