Hello again
On reading the messages on the list, I've noticed that it seems that ide-sci
is somehow broken on 2.4.0.
My worse nightmare happens when I try to read a audio CD. gtoaster and
gcombust freezes pretty good! I can't open a new window and the only thing
that works is alt+ctr+backspace. cdrecord -scanbus hangs there for eternity.
I am sending below the outputs of dmesg, /proc/ide and proc/scsi. I didn't
see anything wrong but one never knows ...
Many thanks
Eduardo
[root@localhost /root]# ls -l /proc/ide/
total 0
-r--r--r-- 1 root root 0 May 14 20:45 drivers
lrwxrwxrwx 1 root root 8 May 14 20:45 hda -> ide0/hda/
lrwxrwxrwx 1 root root 8 May 14 20:45 hdc -> ide1/hdc/
lrwxrwxrwx 1 root root 8 May 14 20:45 hdd -> ide1/hdd/
dr-xr-xr-x 3 root root 0 May 14 20:45 ide0/
dr-xr-xr-x 4 root root 0 May 14 20:45 ide1/
-r--r--r-- 1 root root 0 May 14 20:45 piix
[root@localhost /root]# ls -l /proc/scsi/
total 0
dr-xr-xr-x 2 root root 0 May 14 20:45 ide-scsi/
dr-xr-xr-x 2 root root 0 May 14 20:45 ppa/
-r--r--r-- 1 root root 0 May 14 20:45 scsi
[root@localhost /root]# ls -l /proc/scsi/ide-scsi/
total 0
-rw-r--r-- 1 root root 0 May 14 20:45 1
[root@localhost /root]# dmesg
Linux version 2.4.3-20mdk ([EMAIL PROTECTED]) (gcc version
egcs-2.91.66 19990314/Linux (egcs-1.1.2 release / Linux-Mandrake 8.0)) #1
Sun Apr 15 23:03:10 CEST 2001
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e8000 - 00000000000ec000 (ACPI NVS)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000003f00000 (usable)
BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
On node 0 totalpages: 16128
zone(0): 4096 pages.
zone(1): 12032 pages.
zone(2): 0 pages.
hm, page 01000000 reserved twice.
Kernel command line: auto BOOT_IMAGE=linux ro root=305 hdd=ide-scsi
hdc=ide-scsi
ide_setup: hdd=ide-scsi
ide_setup: hdc=ide-scsi
Initializing CPU#0
Detected 564.847 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 1127.21 BogoMIPS
Memory: 60708k/64512k available (976k kernel code, 3416k reserved, 287k
data, 696k init, 0k highmem)
Dentry-cache hash table entries: 8192 (order: 4, 65536 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 4096 (order: 3, 32768 bytes)
VFS: Diskquotas version dquot_6.5.0 initialized
CPU: Before vendor init, caps: 0383f9ff 00000000 00000000, vendor = 0
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 128K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After vendor init, caps: 0383f9ff 00000000 00000000 00000000
CPU: After generic, caps: 0383f9ff 00000000 00000000 00000000
CPU: Common caps: 0383f9ff 00000000 00000000 00000000
CPU: Intel Celeron (Coppermine) stepping 03
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch ([EMAIL PROTECTED])
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xfa134, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
Unknown bridge resource 2: assuming transparent
PCI: Using IRQ router PIIX [8086/2410] at 00:1f.0
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS not found.
Starting kswapd v1.8
pty: 256 Unix98 ptys configured
block: queued sectors max/low 40272kB/13424kB, 128 slots per queue
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller on PCI bus 00 dev f9
PIIX4: chipset revision 2
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x3020-0x3027, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x3028-0x302f, BIOS settings: hdc:DMA, hdd:DMA
hda: ST310212A, ATA DISK drive
hdc: Compaq CRD-8402B, ATAPI CD/DVD-ROM drive
hdd: LG CD-RW CED-8083B, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 19541088 sectors (10005 MB) w/512KiB Cache, CHS=1292/240/63, UDMA(66)
Partition check:
hda: hda1 hda2 < hda5 hda6 hda7 hda8 >
RAMDISK: Compressed image found at block 0
Uncompressing....done.
Freeing initrd memory: 71k freed
Serial driver version 5.05 (2000-12-13) with HUB-6 MANY_PORTS MULTIPORT
SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md.c: sizeof(mdp_super_t) = 4096
autodetecting RAID arrays
autorun ...
... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind 4096)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (ext2 filesystem).
SCSI subsystem driver Revision: 1.00
VFS: Mounted root (ext2 filesystem) readonly.
change_root: old root has d_count=3
Trying to unmount old root ... okay
Freeing unused kernel memory: 696k freed
Adding Swap: 136040k swap-space (priority -1)
Winbond Super-IO detection, now testing ports 3F0,370,250,4E,2E ...
SMSC Super-IO detection, now testing Ports 2F0, 370 ...
0x378: FIFO is 16 bytes
0x378: writeIntrThreshold is 15
0x378: readIntrThreshold is 15
0x378: PWord is 8 bits
0x378: Interrupts are ISA-Pulses
0x378: ECP port cfgA=0x10 cfgB=0x4b
0x378: ECP settings irq=7 dma=3
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,COMPAT,ECP]
parport0: irq 7 detected
parport0: cpp_daisy: aa5500ff(38)
parport0: assign_addrs: aa5500ff(38)
parport0: cpp_daisy: aa5500ff(38)
parport0: assign_addrs: aa5500ff(38)
ppa: Version 2.07 (for Linux 2.4.x)
ppa: Found device at ID 6, Attempting to use EPP 32 bit
ppa: Found device at ID 6, Attempting to use PS/2
ppa: Communication established with ID 6 using PS/2
scsi0 : Iomega VPI0 (ppa) interface
Vendor: IOMEGA Model: ZIP 100 Rev: D.13
Type: Direct-Access ANSI SCSI revision: 02
Attached scsi removable disk sda at scsi0, channel 0, id 6, lun 0
sda : READ CAPACITY failed.
sda : status = 0, message = 00, host = 0, driver = 08
sda : extended sense code = 2
sda : block size assumed to be 512 bytes, disk size 1GB.
sda: I/O error: dev 08:00, sector 0
unable to read partition table
scsi1 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: COMPAQ Model: CD-ROM CRD-8402B Rev: 1.01
Type: CD-ROM ANSI SCSI revision: 02
Vendor: LG Model: CD-RW CED-8083B Rev: 1.12
Type: CD-ROM ANSI SCSI revision: 02
MSDOS FS: Using codepage 850
MSDOS FS: IO charset iso8859-1
MSDOS FS: Using codepage 850
MSDOS FS: IO charset iso8859-1
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.251 $ time 23:13:16 Apr 15 2001
usb-uhci.c: High bandwidth mode enabled
PCI: Found IRQ 11 for device 00:1f.2
PCI: Setting latency timer of device 00:1f.2 to 64
usb-uhci.c: USB UHCI at I/O 0xeec0, IRQ 11
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
hub.c: USB new device connect on bus1/1, assigned device number 2
hub.c: USB hub found
hub.c: 4 ports detected
usb.c: registered new driver keyboard
hub.c: USB new device connect on bus1/1/3, assigned device number 3
usb.c: USB device 3 (vend/prod 0x1606/0x60) is not claimed by any active
driver.
hub.c: USB new device connect on bus1/1/4, assigned device number 4
usb-uhci.c: ENXIO 84000480, flags 0, urb c36e5ae0, burb c36e59e0
usb.c: error getting string descriptor 0 (error=-6)
usb-uhci.c: ENXIO 84000480, flags 0, urb c36e5ae0, burb c36e59e0
usb.c: error getting string descriptor 0 (error=-6)
input0: Compaq Compaq Internet Keyboard on on usb1:4.0
usb.c: registered new driver hid
maestro3: version 1.22 built at 23:13:19 Apr 15 2001
PCI: Found IRQ 5 for device 01:05.0
PCI: The same IRQ used for device 00:1f.3
PCI: The same IRQ used for device 01:09.0
maestro3: Configuring ESS Allegro found at IO 0x1000 IRQ 5
maestro3: subvendor id: 0xb19d0e11
ac97_codec: AC97 Audio codec, id: 0x4583:0x8308 (ESS Allegro ES1988)
/dev/vmmon: Module vmmon: registered with major=10 minor=165 tag=$Name:
build-1118 $
/dev/vmmon: Module vmmon: initialized
/dev/vmnet: open called by PID 871 (vmnet-bridge)
/dev/vmnet: hub 0 does not exist, allocating memory.
/dev/vmnet: port on hub 0 successfully opened
bridge-eth0: peer interface eth0 not found, will wait for it to come up
bridge-eth0: attached
/dev/vmnet: open called by PID 883 (vmnet-netifup)
/dev/vmnet: hub 1 does not exist, allocating memory.
/dev/vmnet: port on hub 1 successfully opened
/dev/vmnet: open called by PID 896 (vmnet-dhcpd)
/dev/vmnet: port on hub 1 successfully opened
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 27M
agpgart: Detected an Intel i810 E Chipset.
agpgart: AGP aperture is 64M @ 0x44000000
[drm] AGP 0.99 on Intel i810 @ 0x44000000 64MB
[drm] Initialized i810 1.1.0 20000928 on minor 63
mtrr: 0x44000000,0x2000000 overlaps existing 0x44000000,0x400000
mtrr: 0x44000000,0x2000000 overlaps existing 0x44000000,0x400000
Attached scsi CD-ROM sr0 at scsi1, channel 0, id 0, lun 0
Attached scsi CD-ROM sr1 at scsi1, channel 0, id 1, lun 0
sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.12
sr1: scsi3-mmc drive: 31x/32x writer cd/rw xa/form2 cdda tray
NetZero Platinum
No Banner Ads and Unlimited Access
Sign Up Today - Only $9.95 per month!
http://www.netzero.net
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
