On 14 April 2010 11:57, Jeremy Parr <[email protected]> wrote: > I have an ME3400 running 12.2(46)SE that will not pass (much) more > than 1000pps through its copper gig port. The interface counters hover > around 1000pps tx/rx, while the bps rate fluctuates (presumable due to > the variable packet sizes getting thrown at it). There are no service > policys or rate limits applied to any of the interfaces. Any thoughts? > > 5 minute input rate 1681000 bits/sec, 879 packets/sec > 5 minute output rate 7545000 bits/sec, 1012 packets/sec
I am also seeing the following in the logs.... %PLATFORM_UCAST-6-PREFIX: One or more, more specific prefixes could not be programmed into TCAM and are being covered by a less specific prefix _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
