Hello,
We use more than 100 of ME3400 and ME3400G for a long time..
We have never seen such problems. For example:
5 minute input rate 5544000 bits/sec, 2253 packets/sec
5 minute output rate 3593000 bits/sec, 2006 packets/sec
This is ME3400 with 12.2(35)SE1
Full-duplex, 1000Mb/s, link type is auto, media type is 10/100/1000BaseTX
SFP
On Wed, 14 Apr 2010, Jeremy Parr wrote:
I have an ME3400 running 12.2(46)SE that will not pass (much) more
than 1000pps through its copper gig port. The interface counters hover
around 1000pps tx/rx, while the bps rate fluctuates (presumable due to
the variable packet sizes getting thrown at it). There are no service
policys or rate limits applied to any of the interfaces. Any thoughts?
5 minute input rate 1681000 bits/sec, 879 packets/sec
5 minute output rate 7545000 bits/sec, 1012 packets/sec
--
Dmitry Valdov
CCIE #15379 (R&S and SP)
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
