You are using "layer-2" template with no place in the TCAM for ip
routes. If you are using this switch as a L3 switch, take a look at the
"default" template.
For more info:
http://www.cisco.com/en/US/docs/switches/metro/me3400/software/release/12.2_52_se/configuration/guide/swsdm.html
JF
Everton da Silva Marques wrote:
On Wed, Apr 14, 2010 at 01:59:02PM -0400, Jean-Francois Levesque wrote:
What is the output of
# sh sdm prefer
ME3400#sh sdm prefer
The current template is "layer-2" template.
The selected template optimizes the resources in
the switch to support this level of features for
8 routed interfaces and 1024 VLANs.
number of unicast mac addresses: 8K
number of IPv4 IGMP groups: 1K
number of IPv4 multicast routes: 0
number of IPv4 unicast routes: 0
number of IPv4 policy based routing aces: 0
number of IPv4/MAC qos aces: 0.5K
number of IPv4/MAC security aces: 1K
ME3400#
Everton
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
