On 14/04/2010 17:40, Jeremy Parr wrote: > I am also seeing the following in the logs.... > > %PLATFORM_UCAST-6-PREFIX: One or more, more specific prefixes could > not be programmed into TCAM and are being covered by a less specific > prefix
Congratulations, you have managed to turn your ME3400 into a C2500 by throwing too many routing entries at the FIB :-D Try cutting down on the number of prefixes the box is holding. If it's dealing with a full DFZ, then cut that out and use some defaults. If this is being caused by a large interior network, then you need to segment / confederate / summarise / whatever in order to drop the number of prefixes. If it's related to having more VRFs than you can shake a stick at, then you need to cut down on that. Nick _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
