That's it! Thanks a lot! Everton
On Wed, Apr 14, 2010 at 02:09:03PM -0400, Jean-Francois Levesque wrote: > You are using "layer-2" template with no place in the TCAM for ip > routes. If you are using this switch as a L3 switch, take a look at the > "default" template. > > For more info: > http://www.cisco.com/en/US/docs/switches/metro/me3400/software/release/12.2_52_se/configuration/guide/swsdm.html > > JF > > Everton da Silva Marques wrote: > >On Wed, Apr 14, 2010 at 01:59:02PM -0400, Jean-Francois Levesque wrote: > >>What is the output of > >> > >># sh sdm prefer > > > >ME3400#sh sdm prefer > > The current template is "layer-2" template. > > The selected template optimizes the resources in > > the switch to support this level of features for > > 8 routed interfaces and 1024 VLANs. > > > > number of unicast mac addresses: 8K > > number of IPv4 IGMP groups: 1K > > number of IPv4 multicast routes: 0 > > number of IPv4 unicast routes: 0 > > number of IPv4 policy based routing aces: 0 > > number of IPv4/MAC qos aces: 0.5K > > number of IPv4/MAC security aces: 1K > > > >ME3400# > > > >Everton > > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
