On 14 April 2010 11:57, Jeremy Parr <[email protected]> wrote: > I have an ME3400 running 12.2(46)SE that will not pass (much) more > than 1000pps through its copper gig port. The interface counters hover > around 1000pps tx/rx, while the bps rate fluctuates (presumable due to > the variable packet sizes getting thrown at it). There are no service > policys or rate limits applied to any of the interfaces. Any thoughts? > > 5 minute input rate 1681000 bits/sec, 879 packets/sec > 5 minute output rate 7545000 bits/sec, 1012 packets/sec
FYI, setting the SDM template to "default" and rebooting has resolved the issue. This was a CPE router (I am the customer) and was unable to verify the high CPU or incorrect SDM problem. The provider set the SDM and now we are seeing well over the previous restriction of 1000pps. Thanks to all. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
