Cutting a bevel the thickness is different than the sheet but the arc distance is the same for the thickness being cut IMHO.
JT On 09/21/2016 12:16 AM, Marius Liebenberg wrote: > Hi All > I am starting a build of a 5 axis plasma machine with bevelling > features. The problem I am facing is not understanding how I will > implement the THC on a 5 axis setup. I am not sure just changing the Z > axis feedback or command signal will do the trick here. If a bevel is > being cut thing surely look different. > Any ideas or brain storming is welcome please. > > > > > ----------------------------- > Regards / Groete > > Marius D. Liebenberg > +27 82 698 3251 > +27 12 743 6064 > ------------------------------------------------------------------------------ > _______________________________________________ > Emc-developers mailing list > Emc-developers@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-developers ------------------------------------------------------------------------------ _______________________________________________ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-developers