I agree. It is more al the signal level or HAL level or component level 
that I am wondering about. You cannot simply change the Z value as we do 
with THCUD. There are A and C axis involved now as well.


------ Original Message ------
From: "John Thornton" <j...@gnipsel.com>
To: "Marius Liebenberg" <mar...@mastercut.co.za>; "EMC developers" 
<emc-developers@lists.sourceforge.net>
Sent: 2016-09-21 12:56:59
Subject: Re: [Emc-developers] THC with 5 axis plasma

>Cutting a bevel the thickness is different than the sheet but the arc 
>distance is the same for the thickness being cut IMHO.
>
>JT
>
>
>On 09/21/2016 12:16 AM, Marius Liebenberg wrote:
>>Hi All
>>I am starting a build of a 5 axis plasma machine with bevelling
>>features. The problem I am facing is not understanding how I will
>>implement the THC on a 5 axis setup. I am not sure just changing the Z
>>axis feedback or command signal will do the trick here. If a bevel is
>>being cut thing surely look different.
>>Any ideas or brain storming is welcome please.
>>
>>
>>
>>
>>-----------------------------
>>Regards / Groete
>>
>>Marius D. Liebenberg
>>+27 82 698 3251
>>+27 12 743 6064
>>------------------------------------------------------------------------------
>>_______________________________________________
>>Emc-developers mailing list
>>Emc-developers@lists.sourceforge.net
>>https://lists.sourceforge.net/lists/listinfo/emc-developers
>
------------------------------------------------------------------------------
_______________________________________________
Emc-developers mailing list
Emc-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-developers

Reply via email to