A DofC must go with every unit. AIUI, the R+TTE Directive also requires this, and there are others which do the same.
Nick. On 29 Nov 2012, at 16:18, Jim Hulbert <jim.hulb...@pb.com> wrote: > From article 5 of the Machinery Directive, the manufacturer or authorized > representative shall, among other things: > "(e) draw up the EC declaration of conformity in accordance with Annex II, > part 1, Section A and ensure that it accompanies the machinery;" > > Does the above mean the DoC must be supplied with each piece of equipment, or > as John stated: "One full copy should go with every shipment that crosses an > EU border, or a Member State border..."? > > Jim Hulbert > - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <emcp...@radiusnorth.net> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher: <j.bac...@ieee.org> David Heald: <dhe...@gmail.com>