On Thursday 13 October 2016 07:41:18 andy pugh wrote:

> On 13 October 2016 at 04:23,  <dan...@austin.rr.com> wrote:
> > Is there a better way, like
> Possibly. You could try settting up one of the sim configs with 100x
> your machine limits. (maybe even 1000x)

Hijacking a thread here, but I had asked a limits (in the sim) question 
sometime this past summer and got crickets. I hacked around and got 
something similar to work on TLM (lathe mode) but mill mode is still a 
puzzle.  There seems to be zero effect from adjusting the limits in the 
simulators axis.ini vs what you get shown on screen.

And JFTR, I just found it, there are too many sims in the menu, and while 
I had setup a sim.lathe, I was still running axis.sim, not the 
asix.sim-mill with "linuxcnc -l".  Now the problem is that I had added 
some hacks to simulate a successful g38.2 function, so I'll have to find 
and move them to the -lathe and -mill trees, and nuke the generic copy.

I'll get me coat. Thanks for the trigger that made me go look again, 
Cheers, Gene Heskett
"There are four boxes to be used in defense of liberty:
 soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author)
Genes Web page <http://geneslinuxbox.net:6309/gene>

Check out the vibrant tech community on one of the world's most 
engaging tech sites, SlashDot.org! http://sdm.link/slashdot
Emc-users mailing list

Reply via email to