On Saturday 15 July 2017 12:38:34 Nicklas Karlsson wrote: > > > > ... > > > > The stuff here? > > > > http://wiki.linuxcnc.org/cgi-bin/wiki.pl?HalSchematicsUsingGsche > > > >m > > > > > > ... > > > > ... > > Are you intending to be able to translate an existing, working > > config into this, and to be able to take this back to working .ini + > > .hal files? > > No translation of existing config is planned because I expect it would > be hard to place the symbols and nets. It should be used to make > configuration file. > > it should probably be rather straight forward to implement feedback of > attribute values if there is a use for it. > > > Not necessarily the originals, but perhaps order optimized that > > still do the exact same job? That would, I believe, make logic > > mistakes in the original .hal easier to spot. Face-palm moments, > > those. :-) > > I anyone who make circuit boards by writing the netlist and feed it > into the layout program. As is now the *.hal file is almost only about > connecting the pins.
I have a somewhat broader view of a hal file. I tend to build the logic I need, then treat it as a logic block, at least in my mind. But I try to keep that function block in a single, hopefully well commented stanza of the hal file so if I have to go back later and "fix it", I have as much of it as will fit on screen, in one screen full. I don't always succeed of course. :) > ---------------------------------------------------------------------- >-------- Check out the vibrant tech community on one of the world's > most engaging tech sites, Slashdot.org! http://sdm.link/slashdot > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) Genes Web page <http://geneslinuxbox.net:6309/gene> ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
