>
> In practice, I find that on my Elan II if I enable
> CF-8 (set to "1", so that the selected focus point is
> the primary E-TTL sensor) apply FEC based on the
> reflectivity of what the AF/ETTL sensor is covering,
> use flash exposure lock (FEL, the asterisk button
> under the right thumb), and the green light comes on,
> I'm home free. I then recompose and shoot. It's MUCH
> faster than it sounds, and you remember it about the
> third time you read through it in the book with the
> camera in your lap. ;-)
>
MadMat - I am a little confused here, you indicate in the above that the
green light will come on after pressing * asterisk button on the Elan II
and then recompose and shoot the picture. I believe that the only time
that the green light will come on is After pressing the shutter button
and firing the flash and not before. At least this is how it works with
my Elan II and 550ex.
Don
*
****
*******
***********************************************************
* For list instructions, including unsubscribe, see:
* http://www.a1.nl/phomepag/markerink/eos_list.htm
***********************************************************
