And, around here it is pretty common to have 220V/30A wall outlets in the shop or garage. If asked why, you simply smile and say: "Welder."
That is a pretty small welder, at that. The wiring is actually usually compatible too. Most 220V welders want hot/hot/ground. Mike > -----Original Message----- > From: [email protected] [mailto:[email protected]] On > Behalf Of Lee Hart > Sent: Saturday, August 10, 2013 3:07 PM > To: Electric Vehicle Discussion List > Subject: Re: [EVDL] EVLN: Comparing JuiceBox, OpenEVSE and EVSEUpgrade > > Bruce EVangel Parmenter wrote: > > So, if I understood Cor's post correctly, any EVSE (even non Ul > > approved) that is not hardwired (uses a plug into an outlet instead) > > bypasses city law requiring the EVSE permitting process? > > Yes, that is correct. The NEC is specifically banned from regulating non- > permanent wiring. Since most building codes only reference NEC standards, > they also cannot regulate what you plug into an AC receptacle. > > -- > An engineer can do for a nickel what any damn fool can do for a dollar. > -- Henry Ford > -- > Lee A. Hart, http://www.sunrise-ev.com/LeesEVs.htm > _______________________________________________ > UNSUBSCRIBE: http://www.evdl.org/help/index.html#usub > http://lists.evdl.org/listinfo.cgi/ev-evdl.org > For EV drag racing discussion, please use NEDRA > (http://groups.yahoo.com/group/NEDRA) _______________________________________________ UNSUBSCRIBE: http://www.evdl.org/help/index.html#usub http://lists.evdl.org/listinfo.cgi/ev-evdl.org For EV drag racing discussion, please use NEDRA (http://groups.yahoo.com/group/NEDRA)
