--- On Wed, 7/22/09, Stanton Mitrany <[email protected]> wrote:
On Jul 22, 2009, at 4:45 PM, Wolfram Gottfried wrote: I completed this exact job a year or so ago using iFixit's instructions and they were spot on and very accurate. Do yourself a favor though and print out the screw guide PDF, and as you remove screws attach them to the screwguide printout at each step - this particular model has dozens of screws that look the same, are the same thread pattern but may be different in length by as little as one or two millimeters - which is enough to make it not go together properly. So it is vital that the screws go IN to the same holes they came OUT of. — I've just searched the ifixit.com pages relating to this work, and have been unsuccessful in finding the screw guide Wolfram suggests will be helpful. Perhaps ifixit.com no longer makes this handy document available. Does anyone have this as a saved file to send to me? I can use the screw guides for both the Hard Drive and the Optical Drive undertakings. --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to Low End Mac's G-Books list, a group for those using G3 iBooks and PowerBooks (we run a separate list for G4 'Books). The list FAQ is at http://lowendmac.com/lists/g-books.html and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/g-books?hl=en Low End Mac RSS feed at feed://lowendmac.com/feed.xml -~----------~----~----~----~------~----~------~--~---
