Hans Verkuil wrote: > On Saturday 04 November 2006 17:19, Magnus Hoglund wrote: >> I'm right now compiling a new kernel and ivtv-0.4.0 to start >> the tests at which version my sound starts failing...
This process was quick... The sound dissappeared with 2.6.14 and ivtv-0.4.1... I have sound with 0.4.0... Also tried 2.6.15 with 0.4.1 and sound was missing... I should mention that I have an "options msp3400 once=1 standard=0x08" in my /etc/modules.d/ivtv... It looks like the msp3400-module detects different chips in 0.4.0 and 0.4.1... Is this the cause of my problems perhaps? Regards, Magnus dmesg output: 0.4.0 ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.4.0 (tagged release) loading ivtv: Linux version: 2.6.14-gentoo-r7 K7 4KSTACKS gcc-4.1 ivtv: In case of problems please include the debug info ivtv: between the START INIT IVTV and END INIT IVTV lines when ivtv: mailing the ivtv-devel mailinglist. ivtv0: Autodetected WinTV PVR 250 card (iTVC16 based) ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 17 (level, low) -> IRQ 18 ivtv0: Unreasonably low latency timer, setting to 64 (was 32) tveeprom: ivtv version tveeprom: Hauppauge: model = 32059, rev = B143, serial# = 7263582 tveeprom: tuner = Temic 4046FM5 (idx = 43, type = 22) tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L') PAL(D/K) (eeprom = 0x74, v4l2 = 0x00400e17) tveeprom: audio processor = MSP4418 (type = 19) tveeprom: decoder processor = SAA7115 (type = 13) ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50] tuner (ivtv): chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61] saa7115 5-0021: saa7115 found @ 0x42 (ivtv i2c driver #0) ivtv0: i2c attach to card #0 ok [client=saa7115, addr=21] msp34xx: ivtv version msp34xx: init: chip=MSP3418W-A2, has NICAM support, simple (D) mode, simpler (G) no-thread mode msp34xx: $Id$ compiled on: Nov 4 2006 18:56:53 ivtv0: i2c attach to card #0 ok [client=MSP3418W-A2, addr=40] ivtv0: loading /lib/modules/ivtv-fw-enc.bin ivtv0: Encoder revision: 0x02050032 ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) ivtv0: Allocate DMA encoder YUV stream: 161 x 12960 buffers (2048KB total) ivtv0: Allocate DMA encoder VBI stream: 80 x 26208 buffers (2048KB total) ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total) tuner: type set to 22 (Temic PAL/SECAM multi (4046 FM5)) by ivtv i2c driver #0 ivtv0: Initialized WinTV PVR 250, card #0 ivtv: ==================== END INIT IVTV ==================== 0.4.1 ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.4.1 (tagged release) loading ivtv: Linux version: 2.6.14-gentoo-r7 K7 4KSTACKS gcc-4.1 ivtv: In case of problems please include the debug info between ivtv: the START INIT IVTV and END INIT IVTV lines, along with ivtv: any module options, when mailing the ivtv-users mailinglist. ivtv0: Autodetected WinTV PVR 250 card (cx23416 based) ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 17 (level, low) -> IRQ 18 tveeprom: ivtv version tveeprom: Hauppauge: model = 32059, rev = B143, serial# = 7263582 tveeprom: tuner = Temic 4046FM5 (idx = 43, type = 22) tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L') PAL(D/K) (eeprom = 0x74, v4l2 = 0x00400e17) tveeprom: audio processor = MSP4418 (type = 19) tveeprom: decoder processor = SAA7115 (type = 13) ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50] tuner (ivtv): chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61] saa7115 5-0021: ivtv driver saa7115 5-0021: saa7115 found @ 0x42 (ivtv i2c driver #0) ivtv0: i2c attach to card #0 ok [client=saa7115, addr=21] msp3400 5-0040: ivtv driver msp3400 5-0040: chip=MSP4418G-A2 +nicam +simple +simpler +radio mode=simpler ivtv0: i2c attach to card #0 ok [client=MSP4418G-A2, addr=40] msp3400 5-0040: msp34xxg daemon started ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) ivtv0: Encoder revision: 0x02050032 ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) ivtv0: Allocate DMA encoder YUV stream: 161 x 12960 buffers (2048KB total) ivtv0: Allocate DMA encoder VBI stream: 80 x 26208 buffers (2048KB total) ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total) tuner: type set to 22 (Temic PAL/SECAM multi (4046 FM5)) by ivtv i2c driver #0 ivtv0: Initialized WinTV PVR 250, card #0 ivtv: ==================== END INIT IVTV ==================== _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
