Hans Verkuil wrote: > OK, I'm first tackling why setting the standard doesn't work. Please > apply the attached patch to 0.4.1 and try again (with 'standard=0x08' > as option). I expect that it will work now. If so, then please upgrade > to 0.4.7, apply the same patch and test again. It should still work.
With the patch, 0.4.7 is working nicely (with standard=0x08) on 2.6.14... > If so, then it should also work using kernel 2.6.18 and ivtv-0.8, since > the same fix is part of the 2.6.18 kernel. Are you sure you didn't test > with the msp3400 from ivtv-0.4 instead of the msp3400 from the kernel? My test with 2.6.18 and 0.8.0 were on a freshly installed gentoo. I emerged 0.8.0 from portage and there were no old ivtv's installed... I will try 2.6.18 with 0.8.0 and the standard-parameter as soon as my wife is finished watching some recorded programs... :) > Please let me know the results, based on that I'll try to figure out why > NICAM isn't detected automatically. Will send you some info on 0.8.0 soon... Thank you for your help so far! /Magnus _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
