Hans Verkuil wrote: > On Saturday 04 November 2006 19:55, Magnus Hoglund wrote: >> Hi, >> >> I did'nt have these options with 0.8.0 ! >> I have them with 0.4.1 however... > > Ah, OK. But still, please don't use them in any version. I assume > ivtv-0.4.0 still works without these options, while ivtv-0.4.1 doesn't?
I'm losing sound even in 0.4.0 when removing the "options msp3400 standard=0x08"... When enabling the option again sound returns... Below are debug=2 outputs of 0.4.0 with and without standard=0x08 option! Best regards, Magnus ------------------------------------------------------------------------ with standard=0x08 -- Sound!! ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.4.0 (tagged release) loading ivtv: Linux version: 2.6.14-gentoo-r7 K7 4KSTACKS gcc-4.1 ivtv: In case of problems please include the debug info ivtv: between the START INIT IVTV and END INIT IVTV lines when ivtv: mailing the ivtv-devel mailinglist. ivtv0: Autodetected WinTV PVR 250 card (iTVC16 based) ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 17 (level, low) -> IRQ 18 tveeprom: ivtv version tveeprom: Hauppauge: model = 32059, rev = B143, serial# = 7263582 tveeprom: tuner = Temic 4046FM5 (idx = 43, type = 22) tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L') PAL(D/K) (eeprom = 0x74, v4l2 = 0x00400e17) tveeprom: audio processor = MSP4418 (type = 19) tveeprom: decoder processor = SAA7115 (type = 13) ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50] tuner (ivtv): chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61] saa7115 5-0021: saa7115 found @ 0x42 (ivtv i2c driver #0) ivtv0: i2c attach to card #0 ok [client=saa7115, addr=21] msp34xx: setvolume: mute=off 58880:58880 v=0x72 b=0x00 msp34xx: ivtv version msp34xx: init: chip=MSP3418W-A2, has NICAM support, simple (D) mode, simpler (G) no-thread mode msp34xx: $Id$ compiled on: Nov 4 2006 18:56:53 msp34xxg: set source to 3 (0x320) msp34xxg: current mode: 5.5/5.85 B/G NICAM FM (0x0008) msp34xxg: unmute msp34xx: setbass: 32768 0x00 msp34xx: settreble: 32768 0x00 msp34xx: setvolume: mute=off 58880:58880 v=0x72 b=0x00 ivtv0: i2c attach to card #0 ok [client=MSP3418W-A2, addr=40] ivtv0: loading /lib/modules/ivtv-fw-enc.bin ivtv0: Encoder revision: 0x02050032 ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) ivtv0: Allocate DMA encoder YUV stream: 161 x 12960 buffers (2048KB total) ivtv0: Allocate DMA encoder VBI stream: 80 x 26208 buffers (2048KB total) ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total) tuner: type set to 22 (Temic PAL/SECAM multi (4046 FM5)) by ivtv i2c driver #0 msp34xx: MSP_SET_MATRIX msp34xx: scart switch: in1 da => 1 msp34xx: VIDIOCGAUDIO msp34xx: VIDIOCSAUDIO msp34xx: VIDIOCSAUDIO setting va->volume to 58880 msp34xx: VIDIOCSAUDIO setting va->balance to 32768 msp34xx: VIDIOCSAUDIO setting va->flags to 30 msp34xx: VIDIOCSAUDIO setting msp->left to 58880 msp34xx: VIDIOCSAUDIO setting msp->right to 58880 msp34xx: VIDIOCSAUDIO setting msp->bass to 32768 msp34xx: VIDIOCSAUDIO setting msp->treble to 32768 msp34xx: VIDIOCSAUDIO setting msp->mode to 0 msp34xx: setvolume: mute=off 58880:58880 v=0x72 b=0x00 msp34xx: setbass: 32768 0x00 msp34xx: settreble: 32768 0x00 msp34xxg: set source to 3 (0x320) msp34xx: VIDIOCSCHAN msp34xx: switching to TV mode msp34xxg: set source to 3 (0x320) msp34xxg: current mode: 5.5/5.85 B/G NICAM FM (0x0008) msp34xxg: unmute msp34xx: setbass: 32768 0x00 msp34xx: settreble: 32768 0x00 msp34xx: setvolume: mute=off 58880:58880 v=0x72 b=0x00 msp34xx: VIDIOCGAUDIO msp34xx: VIDIOCSAUDIO msp34xx: VIDIOCSAUDIO setting va->volume to 58880 msp34xx: VIDIOCSAUDIO setting va->balance to 32768 msp34xx: VIDIOCSAUDIO setting va->flags to 31 msp34xx: VIDIOCSAUDIO setting msp->left to 58880 msp34xx: VIDIOCSAUDIO setting msp->right to 58880 msp34xx: VIDIOCSAUDIO setting msp->bass to 32768 msp34xx: VIDIOCSAUDIO setting msp->treble to 32768 msp34xx: VIDIOCSAUDIO setting msp->mode to 0 msp34xx: setvolume: mute=on 58880:58880 v=0x00 b=0x00 msp34xx: setbass: 32768 0x00 msp34xx: settreble: 32768 0x00 msp34xxg: set source to 3 (0x320) msp34xx: VIDIOCSCHAN msp34xx: switching to TV mode msp34xxg: set source to 3 (0x320) msp34xxg: current mode: 5.5/5.85 B/G NICAM FM (0x0008) msp34xxg: unmute msp34xx: setbass: 32768 0x00 msp34xx: settreble: 32768 0x00 msp34xx: setvolume: mute=off 58880:58880 v=0x72 b=0x00 msp34xx: VIDIOCGAUDIO msp34xx: VIDIOCSAUDIO msp34xx: VIDIOCSAUDIO setting va->volume to 58880 msp34xx: VIDIOCSAUDIO setting va->balance to 32768 msp34xx: VIDIOCSAUDIO setting va->flags to 31 msp34xx: VIDIOCSAUDIO setting msp->left to 58880 msp34xx: VIDIOCSAUDIO setting msp->right to 58880 msp34xx: VIDIOCSAUDIO setting msp->bass to 32768 msp34xx: VIDIOCSAUDIO setting msp->treble to 32768 msp34xx: VIDIOCSAUDIO setting msp->mode to 0 msp34xx: setvolume: mute=on 58880:58880 v=0x00 b=0x00 msp34xx: setbass: 32768 0x00 msp34xx: settreble: 32768 0x00 msp34xx: VIDIOCSFREQ msp34xxg: set source to 3 (0x320) msp34xxg: current mode: 5.5/5.85 B/G NICAM FM (0x0008) msp34xxg: unmute msp34xx: setbass: 32768 0x00 msp34xx: settreble: 32768 0x00 msp34xx: setvolume: mute=on 58880:58880 v=0x00 b=0x00 msp34xx: VIDIOCGAUDIO msp34xx: VIDIOCSAUDIO msp34xx: VIDIOCSAUDIO setting va->volume to 58880 msp34xx: VIDIOCSAUDIO setting va->balance to 32768 msp34xx: VIDIOCSAUDIO setting va->flags to 30 msp34xx: VIDIOCSAUDIO setting msp->left to 58880 msp34xx: VIDIOCSAUDIO setting msp->right to 58880 msp34xx: VIDIOCSAUDIO setting msp->bass to 32768 msp34xx: VIDIOCSAUDIO setting msp->treble to 32768 msp34xx: VIDIOCSAUDIO setting msp->mode to 0 msp34xx: setvolume: mute=off 58880:58880 v=0x72 b=0x00 msp34xx: setbass: 32768 0x00 msp34xx: settreble: 32768 0x00 ivtv0: Initialized WinTV PVR 250, card #0 ivtv: ==================== END INIT IVTV ==================== without standard=0x08 --- No sound! ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.4.0 (tagged release) loading ivtv: Linux version: 2.6.14-gentoo-r7 K7 4KSTACKS gcc-4.1 ivtv: In case of problems please include the debug info ivtv: between the START INIT IVTV and END INIT IVTV lines when ivtv: mailing the ivtv-devel mailinglist. ivtv0: Autodetected WinTV PVR 250 card (iTVC16 based) ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 17 (level, low) -> IRQ 18 tveeprom: ivtv version tveeprom: Hauppauge: model = 32059, rev = B143, serial# = 7263582 tveeprom: tuner = Temic 4046FM5 (idx = 43, type = 22) tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L') PAL(D/K) (eeprom = 0x74, v4l2 = 0x00400e17) tveeprom: audio processor = MSP4418 (type = 19) tveeprom: decoder processor = SAA7115 (type = 13) ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50] tuner (ivtv): chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61] saa7115 5-0021: saa7115 found @ 0x42 (ivtv i2c driver #0) ivtv0: i2c attach to card #0 ok [client=saa7115, addr=21] msp34xx: setvolume: mute=off 58880:58880 v=0x72 b=0x00 msp34xx: ivtv version msp34xx: init: chip=MSP3418W-A2, has NICAM support, simple (D) mode, simpler (G) no-thread mode msp34xx: $Id$ compiled on: Nov 4 2006 18:56:53 msp34xxg: set source to 3 (0x320) msp34xxg: triggered autodetect, waiting for result msp34xxg: detection still in progress msp34xxg: detection still in progress msp34xxg: current mode: ERROR (0x0000) msp34xxg: unmute msp34xx: setbass: 32768 0x00 msp34xx: settreble: 32768 0x00 msp34xx: setvolume: mute=off 58880:58880 v=0x72 b=0x00 ivtv0: i2c attach to card #0 ok [client=MSP3418W-A2, addr=40] ivtv0: loading /lib/modules/ivtv-fw-enc.bin ivtv0: Encoder revision: 0x02050032 ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) ivtv0: Allocate DMA encoder YUV stream: 161 x 12960 buffers (2048KB total) ivtv0: Allocate DMA encoder VBI stream: 80 x 26208 buffers (2048KB total) ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total) tuner: type set to 22 (Temic PAL/SECAM multi (4046 FM5)) by ivtv i2c driver #0 msp34xx: MSP_SET_MATRIX msp34xx: scart switch: in1 da => 1 msp34xx: VIDIOCGAUDIO msp34xx: VIDIOCSAUDIO msp34xx: VIDIOCSAUDIO setting va->volume to 58880 msp34xx: VIDIOCSAUDIO setting va->balance to 32768 msp34xx: VIDIOCSAUDIO setting va->flags to 30 msp34xx: VIDIOCSAUDIO setting msp->left to 58880 msp34xx: VIDIOCSAUDIO setting msp->right to 58880 msp34xx: VIDIOCSAUDIO setting msp->bass to 32768 msp34xx: VIDIOCSAUDIO setting msp->treble to 32768 msp34xx: VIDIOCSAUDIO setting msp->mode to 0 msp34xx: setvolume: mute=off 58880:58880 v=0x72 b=0x00 msp34xx: setbass: 32768 0x00 msp34xx: settreble: 32768 0x00 msp34xxg: set source to 3 (0x320) msp34xx: VIDIOCSCHAN msp34xx: switching to TV mode msp34xxg: set source to 3 (0x320) msp34xxg: triggered autodetect, waiting for result msp34xxg: detection still in progress msp34xxg: detection still in progress msp34xxg: current mode: ERROR (0x0000) msp34xxg: unmute msp34xx: setbass: 32768 0x00 msp34xx: settreble: 32768 0x00 msp34xx: setvolume: mute=off 58880:58880 v=0x72 b=0x00 msp34xx: VIDIOCGAUDIO msp34xx: VIDIOCSAUDIO msp34xx: VIDIOCSAUDIO setting va->volume to 58880 msp34xx: VIDIOCSAUDIO setting va->balance to 32768 msp34xx: VIDIOCSAUDIO setting va->flags to 31 msp34xx: VIDIOCSAUDIO setting msp->left to 58880 msp34xx: VIDIOCSAUDIO setting msp->right to 58880 msp34xx: VIDIOCSAUDIO setting msp->bass to 32768 msp34xx: VIDIOCSAUDIO setting msp->treble to 32768 msp34xx: VIDIOCSAUDIO setting msp->mode to 0 msp34xx: setvolume: mute=on 58880:58880 v=0x00 b=0x00 msp34xx: setbass: 32768 0x00 msp34xx: settreble: 32768 0x00 msp34xx: VIDIOCSFREQ msp34xxg: set source to 3 (0x320) msp34xxg: triggered autodetect, waiting for result msp34xxg: detection still in progress msp34xxg: detection still in progress msp34xxg: current mode: ERROR (0x0000) msp34xxg: unmute msp34xx: setbass: 32768 0x00 msp34xx: settreble: 32768 0x00 msp34xx: setvolume: mute=on 58880:58880 v=0x00 b=0x00 msp34xx: VIDIOCGAUDIO msp34xx: VIDIOCSAUDIO msp34xx: VIDIOCSAUDIO setting va->volume to 58880 msp34xx: VIDIOCSAUDIO setting va->balance to 32768 msp34xx: VIDIOCSAUDIO setting va->flags to 30 msp34xx: VIDIOCSAUDIO setting msp->left to 58880 msp34xx: VIDIOCSAUDIO setting msp->right to 58880 msp34xx: VIDIOCSAUDIO setting msp->bass to 32768 msp34xx: VIDIOCSAUDIO setting msp->treble to 32768 msp34xx: VIDIOCSAUDIO setting msp->mode to 0 msp34xx: setvolume: mute=off 58880:58880 v=0x72 b=0x00 msp34xx: setbass: 32768 0x00 msp34xx: settreble: 32768 0x00 ivtv0: Initialized WinTV PVR 250, card #0 ivtv: ==================== END INIT IVTV ==================== _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
