On Saturday 04 November 2006 19:20, Magnus Hoglund wrote:
> Hans Verkuil wrote:
> > On Saturday 04 November 2006 17:19, Magnus Hoglund wrote:
> >> I'm right now compiling a new kernel and ivtv-0.4.0 to start
> >> the tests at which version my sound starts failing...
>
> This process was quick... The sound dissappeared with
> 2.6.14 and ivtv-0.4.1... I have sound with 0.4.0...
>
> Also tried 2.6.15 with 0.4.1 and sound was missing...
>
> I should mention that I have an "options msp3400 once=1
> standard=0x08" in my /etc/modules.d/ivtv...
Aargh! Please remove these options and try again with 2.6.18/ivtv-0.8.0!
>
> It looks like the msp3400-module detects different chips in 0.4.0 and
> 0.4.1... Is this the cause of my problems perhaps?
Naw, that's a bug in the msp3400 from ivtv-0.4.0. It just prints the
wrong version.
Hans
>
> Regards, Magnus
>
> dmesg output:
>
> 0.4.0
>
> ivtv: ==================== START INIT IVTV ====================
> ivtv: version 0.4.0 (tagged release) loading
> ivtv: Linux version: 2.6.14-gentoo-r7 K7 4KSTACKS gcc-4.1
> ivtv: In case of problems please include the debug info
> ivtv: between the START INIT IVTV and END INIT IVTV lines when
> ivtv: mailing the ivtv-devel mailinglist.
> ivtv0: Autodetected WinTV PVR 250 card (iTVC16 based)
> ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 17 (level, low) -> IRQ 18
> ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
> tveeprom: ivtv version
> tveeprom: Hauppauge: model = 32059, rev = B143, serial# = 7263582
> tveeprom: tuner = Temic 4046FM5 (idx = 43, type = 22)
> tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L') PAL(D/K) (eeprom =
> 0x74, v4l2 = 0x00400e17)
> tveeprom: audio processor = MSP4418 (type = 19)
> tveeprom: decoder processor = SAA7115 (type = 13)
> ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50]
> tuner (ivtv): chip found at addr 0xc2 i2c-bus ivtv i2c driver #0
> ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61]
> saa7115 5-0021: saa7115 found @ 0x42 (ivtv i2c driver #0)
> ivtv0: i2c attach to card #0 ok [client=saa7115, addr=21]
> msp34xx: ivtv version
> msp34xx: init: chip=MSP3418W-A2, has NICAM support, simple (D) mode,
> simpler (G) no-thread mode
> msp34xx: $Id$ compiled on: Nov 4 2006 18:56:53
> ivtv0: i2c attach to card #0 ok [client=MSP3418W-A2, addr=40]
> ivtv0: loading /lib/modules/ivtv-fw-enc.bin
> ivtv0: Encoder revision: 0x02050032
> ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB
> total) ivtv0: Allocate DMA encoder YUV stream: 161 x 12960 buffers
> (2048KB total) ivtv0: Allocate DMA encoder VBI stream: 80 x 26208
> buffers (2048KB total) ivtv0: Allocate DMA encoder PCM audio stream:
> 455 x 4608 buffers (2048KB total)
> tuner: type set to 22 (Temic PAL/SECAM multi (4046 FM5)) by ivtv i2c
> driver #0
> ivtv0: Initialized WinTV PVR 250, card #0
> ivtv: ==================== END INIT IVTV ====================
>
> 0.4.1
>
> ivtv: ==================== START INIT IVTV ====================
> ivtv: version 0.4.1 (tagged release) loading
> ivtv: Linux version: 2.6.14-gentoo-r7 K7 4KSTACKS gcc-4.1
> ivtv: In case of problems please include the debug info between
> ivtv: the START INIT IVTV and END INIT IVTV lines, along with
> ivtv: any module options, when mailing the ivtv-users mailinglist.
> ivtv0: Autodetected WinTV PVR 250 card (cx23416 based)
> ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 17 (level, low) -> IRQ 18
> tveeprom: ivtv version
> tveeprom: Hauppauge: model = 32059, rev = B143, serial# = 7263582
> tveeprom: tuner = Temic 4046FM5 (idx = 43, type = 22)
> tveeprom: tuner fmt = PAL(B/G) PAL(I) SECAM(L/L') PAL(D/K) (eeprom =
> 0x74, v4l2 = 0x00400e17)
> tveeprom: audio processor = MSP4418 (type = 19)
> tveeprom: decoder processor = SAA7115 (type = 13)
> ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50]
> tuner (ivtv): chip found at addr 0xc2 i2c-bus ivtv i2c driver #0
> ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61]
> saa7115 5-0021: ivtv driver
> saa7115 5-0021: saa7115 found @ 0x42 (ivtv i2c driver #0)
> ivtv0: i2c attach to card #0 ok [client=saa7115, addr=21]
> msp3400 5-0040: ivtv driver
> msp3400 5-0040: chip=MSP4418G-A2 +nicam +simple +simpler +radio
> mode=simpler ivtv0: i2c attach to card #0 ok [client=MSP4418G-A2,
> addr=40] msp3400 5-0040: msp34xxg daemon started
> ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
> ivtv0: Encoder revision: 0x02050032
> ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB
> total) ivtv0: Allocate DMA encoder YUV stream: 161 x 12960 buffers
> (2048KB total) ivtv0: Allocate DMA encoder VBI stream: 80 x 26208
> buffers (2048KB total) ivtv0: Allocate DMA encoder PCM audio stream:
> 455 x 4608 buffers (2048KB total)
> tuner: type set to 22 (Temic PAL/SECAM multi (4046 FM5)) by ivtv i2c
> driver #0
> ivtv0: Initialized WinTV PVR 250, card #0
> ivtv: ==================== END INIT IVTV ====================
>
>
>
> _______________________________________________
> ivtv-users mailing list
> [email protected]
> http://ivtvdriver.org/mailman/listinfo/ivtv-users
_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users
